[PATCH v3 1/2] dt-bindings: net: bluetooth: Add device tree bindings for QTI chip wcn3990

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
---
 .../devicetree/bindings/net/qualcomm-bluetooth.txt | 39 ++++++++++++++++++----
 1 file changed, 32 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
index 0ea18a5..c81ac04 100644
--- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
@@ -1,21 +1,32 @@
-Qualcomm Bluetooth Chips
----------------------
+Qualcomm Technologies Inc Bluetooth Chips
+-----------------------------------------
 
 This documents the binding structure and common properties for serial
-attached Qualcomm devices.
+attached Qualcomm Technologies Inc devices.
 
-Serial attached Qualcomm devices shall be a child node of the host UART
-device the slave device is attached to.
+Serial attached Qualcomm Technologies Inc devices shall be a child node
+of the host UART device the slave device is attached to.
 
 Required properties:
  - compatible: should contain one of the following:
    * "qcom,qca6174-bt"
+   * "qcom,wcn3990-bt"
 
 Optional properties:
  - enable-gpios: gpio specifier used to enable chip
  - clocks: clock provided to the controller (SUSCLK_32KHZ)
-
-Example:
+ - vddpa-supply: Bluetooth VDD PA regulator handle
+ - vddio-supply: Bluetooth VDD IO regulator handle
+ - vddldo-supply: Bluetooth VDD LDO regulator handle. Kept under optional
+		  parameters as some of the chipsets doesn't require ldo or
+		  it may use from same vddio.
+ - vddxtal-supply: Bluetooth VDD XTAL regulator handle
+ - vddcore-supply: Bluetooth VDD CORE regulator handle
+ - vddpwd-supply: Chip power down gpio is required when bluetooth module
+		  and other modules like wifi co-exist in a singe chip and
+		  shares a common gpio to bring chip out of reset.
+
+Examples:
 
 serial@7570000 {
 	label = "BT-UART";
@@ -28,3 +39,17 @@ serial@7570000 {
 		clocks = <&divclk4>;
 	};
 };
+
+serial@898000 {
+	label = "BT-UART";
+	status = "okay";
+
+	bluetooth: bt_wcn3990 {
+		compatible = "qca,wcn3990-bt";
+		vddio-supply = <&pm8998_s3>;
+		vddxtal-supply = <&pm8998_s5>;
+		vddcore-supply = <&pm8998_l7>;
+		vddpa-supply = <&pm8998_l17>;
+		vddldo-supply = <&pm8998_l25>;
+	};
+};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux