Hi,
i build linux-next-20180327 with bcm2835_defconfig, but additionally enabled the following settings:
CONFIG_SMP=y
CONFIG_PREEMPT=y
CONFIG_PROVE_LOCKING=y
If i boot my RPi Zero W, then i will get the following output during hci_uart probe:
[ 42.245521] ======================================================
[ 42.265953] WARNING: possible circular locking dependency detected
[ 42.286527] 4.16.0-rc7-next-20180327+ #2 Tainted: G C
[ 42.307153] ------------------------------------------------------
[ 42.327529] kworker/u2:1/31 is trying to acquire lock:
[ 42.346819] (bcm_device_lock){+.+.}, at: [<bf07b028>] bcm_recv+0xa4/0x10c [hci_uart]
[ 42.369028]
but task is already holding lock:
[ 42.402020] (&buf->lock){+.+.}, at: [<c04ad460>] flush_to_ldisc+0x2c/0xc0
[ 42.422713]
which lock already depends on the new lock.
[ 42.471181]
the existing dependency chain (in reverse order) is:
[ 42.505116]
-> #3 (&buf->lock){+.+.}:
[ 42.536142] __763608] __ldsem_down_write_nested+0x4c/0x280
[ 42.780869] ldsem_down_write+0x3c/0x48
[ 42.797163] tty_ldisc_lock+0x20/0x44
[ 42.813230] tty_init_dev+0xd8/0x1b0
[ 42.829130] tty_open+0x30c/0x32c
[ 42.844633] chrdev_open+0x154/0x170
[ 42.860303] do_dentry_open.constprop.4+0x2a8/0x320
[ 42.877260] vfs_open+0x78/0x7c
[ 42.892198] path_openat+0xc14/0xde0
[ 42.907367] do_filp_open+0x40/0x8c
[ 42.922270] do_sys_open+0x114/0x1c4
[ 42.937142] kernel_init_freeable+0x12c/0x1e0
[ 42.952797] kernel_init+0x18/0x120
[ 42.967461] ret_from_fork+0x14/0x20
[ 42.982195] (null)
[ 42.995444]
-> #1 (&tty->legacy_mutex){+.+.}:
[ 43.022015] __mutex_lock+0x70/0x9b4
[ 43.036665] mutex_lock_nested+0x2c/0x34
[ 43.051661] tty_lock+0x5c/0x6c
[ 43.065808] tty_init_dev+0x4c/0x1b0
[ 43.080298] ttyport_open+0x34/0x14c
[ 43.094701] serdev_device_open+0x34/0x40
[ 43.109685] bcm_open+0x9c/0x190 [hci_uart]
[ 43.124862] hci_uart_register_device+0x48/0x228 [hci_uart]
[ 43.141536] bcm_serdev_probe+0xac/0xcc [hci_uart]
[ 43.157381] serdev_drv_probe+0x20/0x24
[ 43.172165] driver_probe_device+0x2d4/0x46c
[ 43.187363] __driver_attach+0x98/0x108
[ 43.202081] bus_for_each_dev+0x68/0x8c
[ 43.216802] driver_attach+0x28/0x30
[ 43.231232] driver_attach_async+0x20/0x58
[ 43.246142] async_run_entry_fn+0x98/0x1a0
[ 43.261105] process_one_work+0x3c8/0x76c
[ 43.276054] worker_thread+0x2b0/0x43c
[ 43.290632] kthread+0x158/0x174
[ 43.304530] ret_from_fork+0x14/0x20
[ 43.318693] (null)
[ 43.331378]
-> #0 (bcm_device_lock){+.+.}:
[ 43.356310] lock_acquire+0x228/0x298
[ 43.370173] __mutex_lock+0x70/0x9b4
[ 43.383785] mutex_lock_nested+0x2c/0x34
[ 43.397711] bcm_recv+0xa4/0x10c [hci_uart]
[ 43.411957] hci_uart_receive_buf+0x68/0x84 [hci_uart]
[ 43.427034] ttyport_receive_buf+0x6c/0xe4
[ 43.440958] flush_to_ldisc+0xa0/0xc0
[ 43.454321] process_one_work+0x3c8/0x76c
[ 43.468099] worker_thread+0x2b0/0x43c
[ 43.481666] kthread+0x158/0x174
[ 43.494633] ret_from_fork+0x14/0x20
[ 43.507831] (null)
[ 43.519665]
other info that might help us debug this:
[ 43.554302] Chain exists of:
bcm_device_lock --> &tty->ldisc_sem --> &buf->lock
[ 43.591776] Possible unsafe locking scenario:
[ 43.615986] CPU0 CPU1
[ 43.629708] ---- ----
[ 43.643463] lock(&buf->lock);
[ 43.655748] lock(&tty->ldisc_sem);
[ 43.671197] lock(&buf->lock);
[ 43.686220] lock(bcm_device_lock);
[ 43.699078]
*** DEADLOCK ***
[ 43.731942] 3 locks held by kworker/u2:1/31:
[ 43.745364] #0: ((wq_completion)"events_unbound"){+.+.}, at: [<c013fb3c>] process_one_work+0x1e0/0x76c
[ 43.764636] #1: ((work_completion)(&buf->work)){+.+.}, at: [<c013fb3c>] process_one_work+0x1e0/0x76c
[ 43.783902] #2: (&buf->lock){+.+.}, at: [<c04ad460>] flush_to_ldisc+0x2c/0xc0
[ 43.801205]
stack backtrace:
[ 43.824860] CPU: 0 PID: 31 Comm: kworker/u2:1 Tainted: G C 4.16.0-rc7-next-20180327+ #2
[ 43.844393] Hardware name: BCM2835
[ 43.857885] Workqueue: events_unbound flush_to_ldisc
[ 43.873103] [<c01118f4>] (unwind_backtrace) from [<c010da50>] (show_stack+0x20/0x24)
[ 43.891391] [<c010da50>] (show_stack) from [<c08f3590>] (dump_stack+0xa4/0xe0)
[ 43.909283] [<c08f3590>] (dump_stack) from [<c017d4e0>] (print_circular_bug.constprop.20+0x1dc/0x2d8)
[ 43.929391] [<c017d4e0>] (print_circular_bug.constprop.20) from [<c017fd30>] (__lock_acquire+0xf00/0x172c)
[ 43.950197] [<c017fd30>] (__lock_acquire) from [<c0180ff8>] (lock_acquire+0x228/0x298)
[ 43.969314] [<c0180ff8>] (lock_acquire) from [<c0909a40>] (__mutex_lock+0x70/0x9b4)
[ 43.988308] [<c0909a40>] (__mutex_lock) from [<c090a3b0>] (mutex_lock_nested+0x2c/0x34)
[ 44.007837] [<c090a3b0>] (mutex_lock_nested) from [<bf07b028>] (bcm_recv+0xa4/0x10c [hci_uart])
[ 44.028328] [<bf07b028>] (bcm_recv [hci_uart]) from [<bf079bf8>] (hci_uart_receive_buf+0x68/0x84 [hci_uart])
[ 44.050162] [<bf079bf8>] (hci_uart_receive_buf [hci_uart]) from [<c04cf928>] (ttyport_receive_buf+0x6c/0xe4)
[ 44.072188] [<c04cf928>] (ttyport_receive_buf) from [<c04ad4d4>] (flush_to_ldisc+0xa0/0xc0)
[ 44.092841] [<c04ad4d4>] (flush_to_ldisc) from [<c013fd24>] (process_one_work+0x3c8/0x76c)
[ 44.113440] [<c013fd24>] (process_one_work) from [<c01414d0>] (worker_thread+0x2b0/0x43c)
[ 44.134095] [<c01414d0>] (worker_thread) from [<c0146fa4>] (kthread+0x158/0x174)
[ 44.153985] [<c0146fa4>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20)
[ 44.173718] Exception stack(0xd8fcdfb0 to 0xd8fcdff8)
[ 44.191211] dfa0: 00000000 00000000 00000000 00000000
[ 44.212185] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 44.233216] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
