Re: Problem with re-loading hci_uart.ko on RPi3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Marcel,

Le 18/02/2018 à 20:07, Marcel Holtmann a écrit :

One option is of course to keep the max-speed in the DT at 115200 Mbps. It would work, but seriously slow down the transport. Maybe this should be done until we get access to the GPIOs.
So I am convinced when we run on hardware that has no GPIO resources exposed (as it is with RPi right now), we should limit the operational speed to the initialization speed. And then my problem actually goes away. It also forces people to get the GPIOs exposed or they have to stick with a slower HCI transport.

We may also reset to initialization speed on module unload.
This will allow multiple tests on the hardware, even if it does not have GPIOs exposed.

Regards,

Fred

--
Frédéric Danis                       Embedded Linux Consultant
frederic.danis.oss@xxxxxxxxx

--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux