The Intel_Reset command is used to reset the device after downloading
the firmware and this is Intel generic command used in both USB and
UART.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@xxxxxxxxxxxxxxx>
---
drivers/bluetooth/btintel.c | 20 ++++++++++++++++++++
drivers/bluetooth/btintel.h | 15 +++++++++++++++
drivers/bluetooth/btusb.c | 15 +++++++--------
drivers/bluetooth/hci_intel.c | 15 +++++++--------
4 files changed, 49 insertions(+), 16 deletions(-)
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 07f00e4..c8aaed1 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -569,6 +569,26 @@ struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
}
EXPORT_SYMBOL_GPL(btintel_regmap_init);
+int btintel_send_intel_reset(struct hci_dev *hdev, u32 boot_param)
+{
+ struct intel_reset params = { 0x00, 0x01, 0x00, 0x01, 0x00000000 };
+ struct sk_buff *skb;
+
+ params.boot_param = cpu_to_le32(boot_param);
+
+ skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(params), ¶ms,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Failed to send Intel Reset command");
+ return PTR_ERR(skb);
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_send_intel_reset);
+
MODULE_AUTHOR("Marcel Holtmann <marcel@xxxxxxxxxxxx>");
MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION);
MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index 1e8955a..2235705 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -69,6 +69,14 @@ struct intel_secure_send_result {
__u8 status;
} __packed;
+struct intel_reset {
+ __u8 reset_type;
+ __u8 patch_enable;
+ __u8 ddc_reload;
+ __u8 boot_option;
+ __le32 boot_param;
+} __packed;
+
#if IS_ENABLED(CONFIG_BT_INTEL)
int btintel_check_bdaddr(struct hci_dev *hdev);
@@ -89,6 +97,7 @@ int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver);
struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
u16 opcode_write);
+int btintel_send_intel_reset(struct hci_dev *hdev, u32 boot_param);
#else
@@ -165,4 +174,10 @@ static inline struct regmap *btintel_regmap_init(struct hci_dev *hdev,
{
return ERR_PTR(-EINVAL);
}
+
+static inline int btintel_send_intel_reset(struct hci_dev *hdev,
+ u32 reset_param)
+{
+ return -EOPNOTSUPP;
+}
#endif
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 29977eb..93db5b9 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2009,8 +2009,6 @@ static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
static int btusb_setup_intel_new(struct hci_dev *hdev)
{
- static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01,
- 0x00, 0x08, 0x04, 0x00 };
struct btusb_data *data = hci_get_drvdata(hdev);
struct sk_buff *skb;
struct intel_version ver;
@@ -2018,6 +2016,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
const struct firmware *fw;
const u8 *fw_ptr;
u32 frag_len;
+ u32 boot_param;
char fwname[64];
ktime_t calltime, delta, rettime;
unsigned long long duration;
@@ -2025,6 +2024,9 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
BT_DBG("%s", hdev->name);
+ /* The default boot parameter */
+ boot_param = 0x00040800;
+
calltime = ktime_get();
/* Read the Intel version information to determine if the device
@@ -2341,12 +2343,9 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
set_bit(BTUSB_BOOTING, &data->flags);
- skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(reset_param), reset_param,
- HCI_INIT_TIMEOUT);
- if (IS_ERR(skb))
- return PTR_ERR(skb);
-
- kfree_skb(skb);
+ err = btintel_send_intel_reset(hdev, boot_param);
+ if (err)
+ return err;
/* The bootloader will not indicate when the device is ready. This
* is done by the operational firmware sending bootup notification.
diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
index 9758684..acac48d 100644
--- a/drivers/bluetooth/hci_intel.c
+++ b/drivers/bluetooth/hci_intel.c
@@ -540,8 +540,6 @@ static int intel_set_baudrate(struct hci_uart *hu, unsigned int speed)
static int intel_setup(struct hci_uart *hu)
{
- static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01,
- 0x00, 0x08, 0x04, 0x00 };
struct intel_data *intel = hu->priv;
struct hci_dev *hdev = hu->hdev;
struct sk_buff *skb;
@@ -552,6 +550,7 @@ static int intel_setup(struct hci_uart *hu)
const u8 *fw_ptr;
char fwname[64];
u32 frag_len;
+ u32 boot_param;
ktime_t calltime, delta, rettime;
unsigned long long duration;
unsigned int init_speed, oper_speed;
@@ -563,6 +562,9 @@ static int intel_setup(struct hci_uart *hu)
hu->hdev->set_diag = btintel_set_diag;
hu->hdev->set_bdaddr = btintel_set_bdaddr;
+ /* Default boot parameter */
+ boot_param = 0x00040800;
+
calltime = ktime_get();
if (hu->init_speed)
@@ -911,12 +913,9 @@ static int intel_setup(struct hci_uart *hu)
set_bit(STATE_BOOTING, &intel->flags);
- skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(reset_param), reset_param,
- HCI_CMD_TIMEOUT);
- if (IS_ERR(skb))
- return PTR_ERR(skb);
-
- kfree_skb(skb);
+ err = btintel_send_intel_reset(hdev, boot_param);
+ if (err)
+ return err;
/* The bootloader will not indicate when the device is ready. This
* is done by the operational firmware sending bootup notification.
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
