Now that ACPI and DT devices are both enumerated as serdevs, we can
remove platform_device support and the bcm_device_list lookup hack.
This also removes any races between suspend/resume and hci-uart binding,
also making the suspend/resume code a lot simpler.
This commit leaves manually binding to an uart using btattach supported
(without irq/gpio and thus suspend/resume support, as before).
Cc: Lukas Wunner <lukas@xxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/bluetooth/hci_bcm.c | 258 +++++---------------------------------------
1 file changed, 27 insertions(+), 231 deletions(-)
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 0438a64b8185..92d6c461a7e7 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -30,7 +30,6 @@
#include <linux/of.h>
#include <linux/property.h>
#include <linux/platform_data/x86/apple.h>
-#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/gpio/consumer.h>
#include <linux/tty.h>
@@ -80,9 +79,6 @@
* set to 0 if @init_speed is already the preferred baudrate
* @irq: interrupt triggered by HOST_WAKE_BT pin
* @irq_active_low: whether @irq is active low
- * @hu: pointer to HCI UART controller struct,
- * used to disable flow control during runtime suspend and system sleep
- * @is_suspended: whether flow control is currently disabled
*/
struct bcm_device {
/* Must be the first member, hci_serdev.c expects this. */
@@ -107,25 +103,14 @@ struct bcm_device {
u32 oper_speed;
int irq;
bool irq_active_low;
-
-#ifdef CONFIG_PM
- struct hci_uart *hu;
- bool is_suspended;
-#endif
};
/* generic bcm uart resources */
struct bcm_data {
struct sk_buff *rx_skb;
struct sk_buff_head txq;
-
- struct bcm_device *dev;
};
-/* List of BCM BT UART devices */
-static DEFINE_MUTEX(bcm_device_lock);
-static LIST_HEAD(bcm_device_list);
-
static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed)
{
if (hu->serdev)
@@ -183,27 +168,6 @@ static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
return 0;
}
-/* bcm_device_exists should be protected by bcm_device_lock */
-static bool bcm_device_exists(struct bcm_device *device)
-{
- struct list_head *p;
-
-#ifdef CONFIG_PM
- /* Devices using serdev always exist */
- if (device && device->hu && device->hu->serdev)
- return true;
-#endif
-
- list_for_each(p, &bcm_device_list) {
- struct bcm_device *dev = list_entry(p, struct bcm_device, list);
-
- if (device == dev)
- return true;
- }
-
- return false;
-}
-
static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
{
int err;
@@ -249,21 +213,17 @@ static irqreturn_t bcm_host_wake(int irq, void *data)
return IRQ_HANDLED;
}
-static int bcm_request_irq(struct bcm_data *bcm)
+static int bcm_request_irq(struct hci_uart *hu)
{
- struct bcm_device *bdev = bcm->dev;
+ struct bcm_device *bdev;
int err;
- mutex_lock(&bcm_device_lock);
- if (!bcm_device_exists(bdev)) {
- err = -ENODEV;
- goto unlock;
- }
+ if (!hu->serdev)
+ return -ENODEV;
- if (bdev->irq <= 0) {
- err = -EOPNOTSUPP;
- goto unlock;
- }
+ bdev = serdev_device_get_drvdata(hu->serdev);
+ if (bdev->irq <= 0)
+ return -EOPNOTSUPP;
err = devm_request_irq(bdev->dev, bdev->irq, bcm_host_wake,
bdev->irq_active_low ? IRQF_TRIGGER_FALLING :
@@ -271,7 +231,7 @@ static int bcm_request_irq(struct bcm_data *bcm)
"host_wake", bdev);
if (err) {
bdev->irq = err;
- goto unlock;
+ return err;
}
device_init_wakeup(bdev->dev, true);
@@ -282,10 +242,7 @@ static int bcm_request_irq(struct bcm_data *bcm)
pm_runtime_set_active(bdev->dev);
pm_runtime_enable(bdev->dev);
-unlock:
- mutex_unlock(&bcm_device_lock);
-
- return err;
+ return 0;
}
static const struct bcm_set_sleep_mode default_sleep_params = {
@@ -306,11 +263,11 @@ static const struct bcm_set_sleep_mode default_sleep_params = {
static int bcm_setup_sleep(struct hci_uart *hu)
{
- struct bcm_data *bcm = hu->priv;
+ struct bcm_device *bdev = serdev_device_get_drvdata(hu->serdev);
struct sk_buff *skb;
struct bcm_set_sleep_mode sleep_params = default_sleep_params;
- sleep_params.host_wake_active = !bcm->dev->irq_active_low;
+ sleep_params.host_wake_active = !bdev->irq_active_low;
skb = __hci_cmd_sync(hu->hdev, 0xfc27, sizeof(sleep_params),
&sleep_params, HCI_INIT_TIMEOUT);
@@ -326,7 +283,7 @@ static int bcm_setup_sleep(struct hci_uart *hu)
return 0;
}
#else
-static inline int bcm_request_irq(struct bcm_data *bcm) { return 0; }
+static inline int bcm_request_irq(struct hci_uart *hu) { return 0; }
static inline int bcm_setup_sleep(struct hci_uart *hu) { return 0; }
#endif
@@ -356,7 +313,6 @@ static int bcm_set_diag(struct hci_dev *hdev, bool enable)
static int bcm_open(struct hci_uart *hu)
{
struct bcm_data *bcm;
- struct list_head *p;
int err;
bt_dev_dbg(hu->hdev, "hu %p", hu);
@@ -369,57 +325,26 @@ static int bcm_open(struct hci_uart *hu)
hu->priv = bcm;
- mutex_lock(&bcm_device_lock);
-
if (hu->serdev) {
+ struct bcm_device *bdev = serdev_device_get_drvdata(hu->serdev);
+
err = serdev_device_open(hu->serdev);
if (err)
goto err_free;
- bcm->dev = serdev_device_get_drvdata(hu->serdev);
- goto out;
- }
-
- if (!hu->tty->dev)
- goto out;
-
- list_for_each(p, &bcm_device_list) {
- struct bcm_device *dev = list_entry(p, struct bcm_device, list);
-
- /* Retrieve saved bcm_device based on parent of the
- * platform device (saved during device probe) and
- * parent of tty device used by hci_uart
- */
- if (hu->tty->dev->parent == dev->dev->parent) {
- bcm->dev = dev;
-#ifdef CONFIG_PM
- dev->hu = hu;
-#endif
- break;
- }
- }
-
-out:
- if (bcm->dev) {
- hu->init_speed = bcm->dev->init_speed;
- hu->oper_speed = bcm->dev->oper_speed;
- err = bcm_gpio_set_power(bcm->dev, true);
+ hu->init_speed = bdev->init_speed;
+ hu->oper_speed = bdev->oper_speed;
+ err = bcm_gpio_set_power(bdev, true);
if (err)
goto err_unset_hu;
}
- mutex_unlock(&bcm_device_lock);
return 0;
err_unset_hu:
if (hu->serdev)
serdev_device_close(hu->serdev);
-#ifdef CONFIG_PM
- else
- bcm->dev->hu = NULL;
-#endif
err_free:
- mutex_unlock(&bcm_device_lock);
hu->priv = NULL;
kfree(bcm);
return err;
@@ -433,20 +358,10 @@ static int bcm_close(struct hci_uart *hu)
bt_dev_dbg(hu->hdev, "hu %p", hu);
- /* Protect bcm->dev against removal of the device or driver */
- mutex_lock(&bcm_device_lock);
-
if (hu->serdev) {
serdev_device_close(hu->serdev);
bdev = serdev_device_get_drvdata(hu->serdev);
- } else if (bcm_device_exists(bcm->dev)) {
- bdev = bcm->dev;
-#ifdef CONFIG_PM
- bdev->hu = NULL;
-#endif
- }
- if (bdev) {
if (IS_ENABLED(CONFIG_PM) && bdev->irq > 0) {
devm_free_irq(bdev->dev, bdev->irq, bdev);
device_init_wakeup(bdev->dev, false);
@@ -459,7 +374,6 @@ static int bcm_close(struct hci_uart *hu)
else
pm_runtime_set_suspended(bdev->dev);
}
- mutex_unlock(&bcm_device_lock);
skb_queue_purge(&bcm->txq);
kfree_skb(bcm->rx_skb);
@@ -482,7 +396,6 @@ static int bcm_flush(struct hci_uart *hu)
static int bcm_setup(struct hci_uart *hu)
{
- struct bcm_data *bcm = hu->priv;
char fw_name[64];
const struct firmware *fw;
unsigned int speed;
@@ -541,7 +454,7 @@ static int bcm_setup(struct hci_uart *hu)
if (err)
return err;
- if (!bcm_request_irq(bcm))
+ if (!bcm_request_irq(hu))
err = bcm_setup_sleep(hu);
return err;
@@ -583,12 +496,9 @@ static int bcm_recv(struct hci_uart *hu, const void *data, int count)
bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
bcm->rx_skb = NULL;
return err;
- } else if (!bcm->rx_skb) {
+ } else if (!bcm->rx_skb && hu->serdev) {
/* Delay auto-suspend when receiving completed packet */
- mutex_lock(&bcm_device_lock);
- if (bcm->dev && bcm_device_exists(bcm->dev))
- pm_request_resume(bcm->dev->dev);
- mutex_unlock(&bcm_device_lock);
+ pm_request_resume(&hu->serdev->dev);
}
return count;
@@ -613,10 +523,8 @@ static struct sk_buff *bcm_dequeue(struct hci_uart *hu)
struct sk_buff *skb = NULL;
struct bcm_device *bdev = NULL;
- mutex_lock(&bcm_device_lock);
-
- if (bcm_device_exists(bcm->dev)) {
- bdev = bcm->dev;
+ if (hu->serdev) {
+ bdev = serdev_device_get_drvdata(hu->serdev);
pm_runtime_get_sync(bdev->dev);
/* Shall be resumed here */
}
@@ -628,8 +536,6 @@ static struct sk_buff *bcm_dequeue(struct hci_uart *hu)
pm_runtime_put_autosuspend(bdev->dev);
}
- mutex_unlock(&bcm_device_lock);
-
return skb;
}
@@ -641,20 +547,12 @@ static int bcm_suspend_device(struct device *dev)
bt_dev_dbg(bdev, "");
- if (!bdev->is_suspended && bdev->hu) {
- hci_uart_set_flow_control(bdev->hu, true);
-
- /* Once this returns, driver suspends BT via GPIO */
- bdev->is_suspended = true;
- }
+ hci_uart_set_flow_control(&bdev->serdev_hu, true);
/* Suspend the device */
err = bdev->set_device_wakeup(bdev, false);
if (err) {
- if (bdev->is_suspended && bdev->hu) {
- bdev->is_suspended = false;
- hci_uart_set_flow_control(bdev->hu, false);
- }
+ hci_uart_set_flow_control(&bdev->serdev_hu, false);
return -EBUSY;
}
@@ -681,11 +579,7 @@ static int bcm_resume_device(struct device *dev)
msleep(15);
/* When this executes, the device has woken up already */
- if (bdev->is_suspended && bdev->hu) {
- bdev->is_suspended = false;
-
- hci_uart_set_flow_control(bdev->hu, false);
- }
+ hci_uart_set_flow_control(&bdev->serdev_hu, false);
return 0;
}
@@ -698,18 +592,7 @@ static int bcm_suspend(struct device *dev)
struct bcm_device *bdev = dev_get_drvdata(dev);
int error;
- bt_dev_dbg(bdev, "suspend: is_suspended %d", bdev->is_suspended);
-
- /*
- * When used with a device instantiated as platform_device, bcm_suspend
- * can be called at any time as long as the platform device is bound,
- * so it should use bcm_device_lock to protect access to hci_uart
- * and device_wake-up GPIO.
- */
- mutex_lock(&bcm_device_lock);
-
- if (!bdev->hu)
- goto unlock;
+ bt_dev_dbg(bdev, "");
if (pm_runtime_active(dev))
bcm_suspend_device(dev);
@@ -720,9 +603,6 @@ static int bcm_suspend(struct device *dev)
bt_dev_dbg(bdev, "BCM irq: enabled");
}
-unlock:
- mutex_unlock(&bcm_device_lock);
-
return 0;
}
@@ -732,18 +612,7 @@ static int bcm_resume(struct device *dev)
struct bcm_device *bdev = dev_get_drvdata(dev);
int err = 0;
- bt_dev_dbg(bdev, "resume: is_suspended %d", bdev->is_suspended);
-
- /*
- * When used with a device instantiated as platform_device, bcm_resume
- * can be called at any time as long as platform device is bound,
- * so it should use bcm_device_lock to protect access to hci_uart
- * and device_wake-up GPIO.
- */
- mutex_lock(&bcm_device_lock);
-
- if (!bdev->hu)
- goto unlock;
+ bt_dev_dbg(bdev, "");
if (device_may_wakeup(dev) && bdev->irq > 0) {
disable_irq_wake(bdev->irq);
@@ -751,10 +620,6 @@ static int bcm_resume(struct device *dev)
}
err = bcm_resume_device(dev);
-
-unlock:
- mutex_unlock(&bcm_device_lock);
-
if (!err) {
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
@@ -1005,57 +870,6 @@ static int bcm_of_probe(struct bcm_device *bdev)
return 0;
}
-static int bcm_probe(struct platform_device *pdev)
-{
- struct bcm_device *dev;
- int ret;
-
- dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
- if (!dev)
- return -ENOMEM;
-
- dev->dev = &pdev->dev;
- dev->irq = platform_get_irq(pdev, 0);
-
- if (has_acpi_companion(&pdev->dev)) {
- ret = bcm_acpi_probe(dev);
- if (ret)
- return ret;
- }
-
- ret = bcm_get_resources(dev);
- if (ret)
- return ret;
-
- platform_set_drvdata(pdev, dev);
-
- dev_info(&pdev->dev, "%s device registered.\n", dev->name);
-
- /* Place this instance on the device list */
- mutex_lock(&bcm_device_lock);
- list_add_tail(&dev->list, &bcm_device_list);
- mutex_unlock(&bcm_device_lock);
-
- ret = bcm_gpio_set_power(dev, false);
- if (ret)
- dev_err(&pdev->dev, "Failed to power down\n");
-
- return 0;
-}
-
-static int bcm_remove(struct platform_device *pdev)
-{
- struct bcm_device *dev = platform_get_drvdata(pdev);
-
- mutex_lock(&bcm_device_lock);
- list_del(&dev->list);
- mutex_unlock(&bcm_device_lock);
-
- dev_info(&pdev->dev, "%s device unregistered.\n", dev->name);
-
- return 0;
-}
-
static const struct hci_uart_proto bcm_proto = {
.id = HCI_UART_BCM,
.name = "Broadcom",
@@ -1103,16 +917,6 @@ static const struct dev_pm_ops bcm_pm_ops = {
SET_RUNTIME_PM_OPS(bcm_suspend_device, bcm_resume_device, NULL)
};
-static struct platform_driver bcm_driver = {
- .probe = bcm_probe,
- .remove = bcm_remove,
- .driver = {
- .name = "hci_bcm",
- .acpi_match_table = ACPI_PTR(bcm_acpi_match),
- .pm = &bcm_pm_ops,
- },
-};
-
static int bcm_serdev_probe(struct serdev_device *serdev)
{
struct bcm_device *bcmdev;
@@ -1123,9 +927,6 @@ static int bcm_serdev_probe(struct serdev_device *serdev)
return -ENOMEM;
bcmdev->dev = &serdev->dev;
-#ifdef CONFIG_PM
- bcmdev->hu = &bcmdev->serdev_hu;
-#endif
bcmdev->serdev_hu.serdev = serdev;
serdev_device_set_drvdata(serdev, bcmdev);
@@ -1175,10 +976,6 @@ static struct serdev_device_driver bcm_serdev_driver = {
int __init bcm_init(void)
{
- /* For now, we need to keep both platform device
- * driver (ACPI generated) and serdev driver (DT).
- */
- platform_driver_register(&bcm_driver);
serdev_device_driver_register(&bcm_serdev_driver);
return hci_uart_register_proto(&bcm_proto);
@@ -1186,7 +983,6 @@ int __init bcm_init(void)
int __exit bcm_deinit(void)
{
- platform_driver_unregister(&bcm_driver);
serdev_device_driver_unregister(&bcm_serdev_driver);
return hci_uart_unregister_proto(&bcm_proto);
--
2.14.3
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
