RESEND because of missing the correct Ccs. Original patch is [0]. This patch adds the device ID for the bluetooth chip used in the AMPAK AP6212 WiFi+Bluetooth module. The AP6212 is used on several BananaPi boards, e.g. M2-Ultra. The AP6212 is a combo module, where the WiFi chip is identified as BCM43430A0 whereas the Bluetooth chip identifies itself as 4343A0. Note, the missing '0' before the 'A0'. The AP6212 needs a firmware blob. Loading the provided firmware file from the BananaPi vendor, the adapter name is printed as 'BCM4343A0 26MHz AP6212_CL1-0061': ''' hci0: Type: Primary Bus: UART BD Address: 43:43:A0:12:1F:AC ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING RX bytes:3076 acl:0 sco:0 events:278 errors:0 TX bytes:39726 acl:0 sco:0 commands:279 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'BCM4343A0 26MHz AP6212_CL1-0061' Class: 0x000000 Service Classes: Unspecified Device Class: Miscellaneous, HCI Version: 4.1 (0x7) Revision: 0xf2 LMP Version: 4.1 (0x7) Subversion: 0x2122 Manufacturer: Broadcom Corporation (15) ''' [0] https://www.spinics.net/lists/linux-bluetooth/msg71876.html Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks> --- drivers/bluetooth/btbcm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c index cc4bdefa6648..4684be247d28 100644 --- a/drivers/bluetooth/btbcm.c +++ b/drivers/bluetooth/btbcm.c @@ -326,6 +326,7 @@ static const struct { { 0x410e, "BCM43341B0" }, /* 002.001.014 */ { 0x4406, "BCM4324B3" }, /* 002.004.006 */ { 0x610c, "BCM4354" }, /* 003.001.012 */ + { 0x2122, "BCM4343A0" }, /* 001.001.034 */ { 0x2209, "BCM43430A1" }, /* 001.002.009 */ { } }; -- 2.15.1 ��.n��������+%������w��{.n�����{��� �^n�r������&��z�ޗ�zf���h���~����������_��+v���)ߣ�
