Hi Lukas, > Loading hci_bcm with CONFIG_GPIOLIB=n results in the following splat > when calling gpiod_to_irq() from bcm_get_resources(): > > WARNING: CPU: 0 PID: 1006 at ./include/linux/gpio/consumer.h:450 bcm_get_resources+0x50/0x80 > CPU: 0 PID: 1006 Comm: kworker/u8:4 Tainted: G A 4.15.0-rc4custom+ #4 > Hardware name: Apple Inc. MacBook8,1/Mac-BE0E8AC46FE800CC, BIOS MB81.88Z.0168.B00.1708080033 08/08/2017 > Call Trace: > bcm_serdev_probe+0x8b/0xc0 > driver_probe_device+0x202/0x310 > __driver_attach+0x85/0x90 > ? driver_probe_device+0x310/0x310 > bus_for_each_dev+0x57/0x80 > async_run_entry_fn+0x2c/0xd0 > process_one_work+0x1d2/0x3d0 > worker_thread+0x26/0x3c0 > ? process_one_work+0x3d0/0x3d0 > kthread+0x10c/0x130 > ? kthread_create_on_node+0x40/0x40 > ret_from_fork+0x1f/0x30 > > We could call gpiod_to_irq() only if IS_ENABLED(CONFIG_GPIOLIB) but > without GPIOLIB, the driver's power saving features can't be used, > so selecting GPIOLIB seems more appropriate. > > The same issue is present in hci_intel.c and hci_nokia.c, fix those up > as well. > > Reported-by: Max Shavrick <mxms@xxxxxx> > Signed-off-by: Lukas Wunner <lukas@xxxxxxxxx> > --- > drivers/bluetooth/Kconfig | 3 +++ > 1 file changed, 3 insertions(+) patch has been applied to bluetooth-next tree. Regards Marcel -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
