From: Steve Brown <sbrown@xxxxxxxxxxxx>
Sets the relay state in node 0100 to 1
[config: Target = 0100]# relay-set 1 0 0
Node 0100 Relay state: 0x01 count: 0 steps: 0
Fetches the relay state of node 0100
[config: Target = 0100]# relay-get
Node 0100 Relay state: 0x01 count: 0 steps: 0
---
mesh/config-client.c | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/mesh/config-client.c b/mesh/config-client.c
index f4012ad02..0118b1853 100644
--- a/mesh/config-client.c
+++ b/mesh/config-client.c
@@ -167,6 +167,14 @@ static bool client_msg_recvd(uint16_t src, uint8_t *data,
get_le16(data + 1), data[3],
mesh_status_str(data[0]));
+ case OP_CONFIG_RELAY_STATUS:
+ if (len != 2)
+ return true;
+ bt_shell_printf("Node %4.4x Relay state: 0x%02x"
+ " count: %d steps: %d\n",
+ src, data[0], data[1]>>5, data[1] & 0x1f);
+ break;
+
case OP_CONFIG_PROXY_STATUS:
if (len != 1)
return true;
@@ -705,6 +713,35 @@ static void cmd_get_proxy(int argc, char *argv[])
cmd_default(OP_CONFIG_PROXY_GET);
}
+static void cmd_set_relay(int argc, char *argv[])
+{
+ uint16_t n;
+ uint8_t msg[2 + 2 + 4];
+ int parm_cnt;
+
+ if (!verify_config_target(target))
+ return;
+
+ n = mesh_opcode_set(OP_CONFIG_RELAY_SET, msg);
+
+ parm_cnt = read_input_parameters(argc, argv);
+ if (parm_cnt != 3) {
+ bt_shell_printf("bad arguments\n");
+ return;
+ }
+
+ msg[n++] = parms[0];
+ msg[n++] = (parms[1] << 5) | parms[2];
+
+ if (!config_send(msg, n))
+ bt_shell_printf("Failed to send \"SET RELAY\"\n");
+}
+
+static void cmd_get_relay(int argc, char *argv[])
+{
+ cmd_default(OP_CONFIG_RELAY_GET);
+}
+
static void cmd_set_ttl(int argc, char *argv[])
{
uint16_t n;
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
