Re: [RFC 1/9] Bluetooth: Read no of adv sets during init

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jaganath,

>>>> This patch reads the number of advertising sets in the controller
>>>> during init and save it in hdev.
>>>> 
>>>> Currently host only supports upto HCI_MAX_ADV_INSTANCES (5).
>>>> 
>>>> Instance 0 is reserved for "Set Advertising" which means that
>>>> multi adv is supported only for total sets - 1.
>>>> 
>>>> Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@xxxxxxxxx>
>>>> ---
>>>> include/net/bluetooth/hci.h      |  7 +++++++
>>>> include/net/bluetooth/hci_core.h |  4 ++++
>>>> net/bluetooth/hci_core.c         | 11 +++++++++--
>>>> net/bluetooth/hci_event.c        | 20 ++++++++++++++++++++
>>>> net/bluetooth/mgmt.c             |  6 +++---
>>>> 5 files changed, 43 insertions(+), 5 deletions(-)
>>>> 
>>>> diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
>>>> index f0868df..59df823 100644
>>>> --- a/include/net/bluetooth/hci.h
>>>> +++ b/include/net/bluetooth/hci.h
>>>> @@ -398,6 +398,7 @@ enum {
>>>> #define HCI_LE_SLAVE_FEATURES          0x08
>>>> #define HCI_LE_PING                    0x10
>>>> #define HCI_LE_DATA_LEN_EXT            0x20
>>>> +#define HCI_LE_EXT_ADV                 0x10
>>>> #define HCI_LE_EXT_SCAN_POLICY         0x80
>>>> 
>>>> /* Connection modes */
>>>> @@ -1543,6 +1544,12 @@ struct hci_cp_le_ext_conn_param {
>>>>        __le16 max_ce_len;
>>>> } __packed;
>>>> 
>>>> +#define HCI_OP_LE_READ_NUM_SUPPORTED_ADV_SETS  0x203b
>>>> +struct hci_rp_le_read_num_supported_adv_sets {
>>>> +       __u8  status;
>>>> +       __u8  num_of_sets;
>>>> +} __packed;
>>>> +
>>>> /* ---- HCI Events ---- */
>>>> #define HCI_EV_INQUIRY_COMPLETE                0x01
>>>> 
>>>> diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
>>>> index 554671c..4a7a4ae 100644
>>>> --- a/include/net/bluetooth/hci_core.h
>>>> +++ b/include/net/bluetooth/hci_core.h
>>>> @@ -219,6 +219,7 @@ struct hci_dev {
>>>>       __u8            features[HCI_MAX_PAGES][8];
>>>>       __u8            le_features[8];
>>>>       __u8            le_white_list_size;
>>>> +       __u8            le_no_of_adv_sets;
>>> 
>>> I was expecting some flag that indicates if the instances would be
>>> maintained by the controller or not, but perhaps this is covered in
>>> other patches.
>>> 
>>>>       __u8            le_states[8];
>>>>       __u8            commands[64];
>>>>       __u8            hci_ver;
>>>> @@ -1154,6 +1155,9 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
>>>> #define bredr_sc_enabled(dev)  (lmp_sc_capable(dev) && \
>>>>                               hci_dev_test_flag(dev, HCI_SC_ENABLED))
>>>> 
>>>> +/* Extended advertising support */
>>>> +#define ext_adv_capable(dev) ((dev)->le_features[1] & HCI_LE_EXT_ADV)
>>>> +
>>>> /* ----- HCI protocols ----- */
>>>> #define HCI_PROTO_DEFER             0x01
>>>> 
>>>> diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
>>>> index a91a09a..3472572 100644
>>>> --- a/net/bluetooth/hci_core.c
>>>> +++ b/net/bluetooth/hci_core.c
>>>> @@ -716,6 +716,12 @@ static int hci_init3_req(struct hci_request *req, unsigned long opt)
>>>>                       hci_req_add(req, HCI_OP_LE_READ_DEF_DATA_LEN, 0, NULL);
>>>>               }
>>>> 
>>>> +               if (ext_adv_capable(hdev)) {
>>>> +                       /* Read LE Number of Supported Advertising Sets */
>>>> +                       hci_req_add(req, HCI_OP_LE_READ_NUM_SUPPORTED_ADV_SETS,
>>>> +                                   0, NULL);
>>>> +               }
>>>> +
>>>>               hci_set_le_support(req);
>>>>       }
>>>> 
>>>> @@ -2676,8 +2682,8 @@ int hci_add_adv_instance(struct hci_dev *hdev, u8 instance, u32 flags,
>>>>               memset(adv_instance->scan_rsp_data, 0,
>>>>                      sizeof(adv_instance->scan_rsp_data));
>>>>       } else {
>>>> -               if (hdev->adv_instance_cnt >= HCI_MAX_ADV_INSTANCES ||
>>>> -                   instance < 1 || instance > HCI_MAX_ADV_INSTANCES)
>>>> +               if (hdev->adv_instance_cnt >= hdev->le_no_of_adv_sets ||
>>>> +                   instance < 1 || instance > hdev->le_no_of_adv_sets)
>>>>                       return -EOVERFLOW;
>>>> 
>>>>               adv_instance = kzalloc(sizeof(*adv_instance), GFP_KERNEL);
>>>> @@ -2972,6 +2978,7 @@ struct hci_dev *hci_alloc_dev(void)
>>>>       hdev->le_max_tx_time = 0x0148;
>>>>       hdev->le_max_rx_len = 0x001b;
>>>>       hdev->le_max_rx_time = 0x0148;
>>>> +       hdev->le_no_of_adv_sets = HCI_MAX_ADV_INSTANCES;
>>>> 
>>>>       hdev->rpa_timeout = HCI_DEFAULT_RPA_TIMEOUT;
>>>>       hdev->discov_interleaved_timeout = DISCOV_INTERLEAVED_TIMEOUT;
>>>> diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
>>>> index a26ae80..06d8c1b 100644
>>>> --- a/net/bluetooth/hci_event.c
>>>> +++ b/net/bluetooth/hci_event.c
>>>> @@ -1243,6 +1243,22 @@ static void hci_cc_le_set_ext_scan_enable(struct hci_dev *hdev,
>>>>       le_set_scan_enable_complete(hdev, cp->enable);
>>>> }
>>>> 
>>>> +static void hci_cc_le_read_num_adv_sets(struct hci_dev *hdev,
>>>> +                                     struct sk_buff *skb)
>>>> +{
>>>> +       struct hci_rp_le_read_num_supported_adv_sets *rp = (void *) skb->data;
>>>> +
>>>> +       BT_DBG("%s status 0x%2.2x No of Adv sets %u", hdev->name, rp->status,
>>>> +              rp->num_of_sets);
>>>> +
>>>> +       if (rp->status)
>>>> +               return;
>>>> +
>>>> +       /* Instance 0 is reserved for Set Advertising */
>>>> +       hdev->le_no_of_adv_sets = min_t(u8, rp->num_of_sets - 1,
>>>> +                                       HCI_MAX_ADV_INSTANCES);
>>> 
>>> Id say if the controller cannot support as many instances as the host
>>> stack then we should keep using the software based scheduler, another
>>> option would be to let the user select what scheduler it wants to use
>>> since with host based scheduler it may get a much more consistent
>>> behavior than with controller based which is especially important for
>>> beacons.
>> 
>> frankly this will not help either. The max instances reported from the controller is not a fixed guaranteed number. It is the most likely case. However a controller can run out of resources and decide to refuse an advertising instance.
>> 
> 
> Does it mean that we need to retrieve no of supported adv sets every time
> we enable advertising?
> 
> or try enabling based on the initial no_of_sets and handle it for eg
> if adv_set_param
> failed with "Limit Reached" error?

we need to handle the error case correctly.

>> However having an extra flag for permanent / continuous offload would be interesting. If not specified, then the kernel will rotate. For 4.x controllers it will rotate based on a single instance, for 5.x it will rotate with n instances. The extra flag could then indicate, please do not include me into the rotation and keep me always active. Which is something that instance 0 would always inherit.
>> 
> 
> So you want to still rotate adv instances by kernel wherein at a time
> n adv sets/instances
> would be enabled, where n is no of supported sets? and timer should be
> running for the
> min of scheduled adv instances duration and once timer expires then
> replace it with the
> next unscheduled instance.

It would be some sort of round-robin. If we have more instances than sets, then timer has to run, and then we rotate, the oldest one moves out, the next moves in.

Regards

Marcel

--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux