Re: [RFC 1/9] Bluetooth: Read no of adv sets during init

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Luiz,

> Hi Jaganath,
>
> On Mon, Dec 4, 2017 at 10:07 AM, Jaganath Kanakkassery
> <jaganath.k.os@xxxxxxxxx> wrote:
>> This patch reads the number of advertising sets in the controller
>> during init and save it in hdev.
>>
>> Currently host only supports upto HCI_MAX_ADV_INSTANCES (5).
>>
>> Instance 0 is reserved for "Set Advertising" which means that
>> multi adv is supported only for total sets - 1.
>>
>> Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@xxxxxxxxx>
>> ---
>>  include/net/bluetooth/hci.h      |  7 +++++++
>>  include/net/bluetooth/hci_core.h |  4 ++++
>>  net/bluetooth/hci_core.c         | 11 +++++++++--
>>  net/bluetooth/hci_event.c        | 20 ++++++++++++++++++++
>>  net/bluetooth/mgmt.c             |  6 +++---
>>  5 files changed, 43 insertions(+), 5 deletions(-)
>>
>> diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
>> index f0868df..59df823 100644
>> --- a/include/net/bluetooth/hci.h
>> +++ b/include/net/bluetooth/hci.h
>> @@ -398,6 +398,7 @@ enum {
>>  #define HCI_LE_SLAVE_FEATURES          0x08
>>  #define HCI_LE_PING                    0x10
>>  #define HCI_LE_DATA_LEN_EXT            0x20
>> +#define HCI_LE_EXT_ADV                 0x10
>>  #define HCI_LE_EXT_SCAN_POLICY         0x80
>>
>>  /* Connection modes */
>> @@ -1543,6 +1544,12 @@ struct hci_cp_le_ext_conn_param {
>>          __le16 max_ce_len;
>>  } __packed;
>>
>> +#define HCI_OP_LE_READ_NUM_SUPPORTED_ADV_SETS  0x203b
>> +struct hci_rp_le_read_num_supported_adv_sets {
>> +       __u8  status;
>> +       __u8  num_of_sets;
>> +} __packed;
>> +
>>  /* ---- HCI Events ---- */
>>  #define HCI_EV_INQUIRY_COMPLETE                0x01
>>
>> diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
>> index 554671c..4a7a4ae 100644
>> --- a/include/net/bluetooth/hci_core.h
>> +++ b/include/net/bluetooth/hci_core.h
>> @@ -219,6 +219,7 @@ struct hci_dev {
>>         __u8            features[HCI_MAX_PAGES][8];
>>         __u8            le_features[8];
>>         __u8            le_white_list_size;
>> +       __u8            le_no_of_adv_sets;
>
> I was expecting some flag that indicates if the instances would be
> maintained by the controller or not, but perhaps this is covered in
> other patches.

Actually le_no_of_adv_sets is initialized to HCI_MAX_ADV_INSTANCES
and if extended adv is supported it will be overwritten with the no of instances
supported by the controller.
>
>>         __u8            le_states[8];
>>         __u8            commands[64];
>>         __u8            hci_ver;
>> @@ -1154,6 +1155,9 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
>>  #define bredr_sc_enabled(dev)  (lmp_sc_capable(dev) && \
>>                                 hci_dev_test_flag(dev, HCI_SC_ENABLED))
>>
>> +/* Extended advertising support */
>> +#define ext_adv_capable(dev) ((dev)->le_features[1] & HCI_LE_EXT_ADV)
>> +
>>  /* ----- HCI protocols ----- */
>>  #define HCI_PROTO_DEFER             0x01
>>
>> diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
>> index a91a09a..3472572 100644
>> --- a/net/bluetooth/hci_core.c
>> +++ b/net/bluetooth/hci_core.c
>> @@ -716,6 +716,12 @@ static int hci_init3_req(struct hci_request *req, unsigned long opt)
>>                         hci_req_add(req, HCI_OP_LE_READ_DEF_DATA_LEN, 0, NULL);
>>                 }
>>
>> +               if (ext_adv_capable(hdev)) {
>> +                       /* Read LE Number of Supported Advertising Sets */
>> +                       hci_req_add(req, HCI_OP_LE_READ_NUM_SUPPORTED_ADV_SETS,
>> +                                   0, NULL);
>> +               }
>> +
>>                 hci_set_le_support(req);
>>         }
>>
>> @@ -2676,8 +2682,8 @@ int hci_add_adv_instance(struct hci_dev *hdev, u8 instance, u32 flags,
>>                 memset(adv_instance->scan_rsp_data, 0,
>>                        sizeof(adv_instance->scan_rsp_data));
>>         } else {
>> -               if (hdev->adv_instance_cnt >= HCI_MAX_ADV_INSTANCES ||
>> -                   instance < 1 || instance > HCI_MAX_ADV_INSTANCES)
>> +               if (hdev->adv_instance_cnt >= hdev->le_no_of_adv_sets ||
>> +                   instance < 1 || instance > hdev->le_no_of_adv_sets)
>>                         return -EOVERFLOW;
>>
>>                 adv_instance = kzalloc(sizeof(*adv_instance), GFP_KERNEL);
>> @@ -2972,6 +2978,7 @@ struct hci_dev *hci_alloc_dev(void)
>>         hdev->le_max_tx_time = 0x0148;
>>         hdev->le_max_rx_len = 0x001b;
>>         hdev->le_max_rx_time = 0x0148;
>> +       hdev->le_no_of_adv_sets = HCI_MAX_ADV_INSTANCES;
>>
>>         hdev->rpa_timeout = HCI_DEFAULT_RPA_TIMEOUT;
>>         hdev->discov_interleaved_timeout = DISCOV_INTERLEAVED_TIMEOUT;
>> diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
>> index a26ae80..06d8c1b 100644
>> --- a/net/bluetooth/hci_event.c
>> +++ b/net/bluetooth/hci_event.c
>> @@ -1243,6 +1243,22 @@ static void hci_cc_le_set_ext_scan_enable(struct hci_dev *hdev,
>>         le_set_scan_enable_complete(hdev, cp->enable);
>>  }
>>
>> +static void hci_cc_le_read_num_adv_sets(struct hci_dev *hdev,
>> +                                     struct sk_buff *skb)
>> +{
>> +       struct hci_rp_le_read_num_supported_adv_sets *rp = (void *) skb->data;
>> +
>> +       BT_DBG("%s status 0x%2.2x No of Adv sets %u", hdev->name, rp->status,
>> +              rp->num_of_sets);
>> +
>> +       if (rp->status)
>> +               return;
>> +
>> +       /* Instance 0 is reserved for Set Advertising */
>> +       hdev->le_no_of_adv_sets = min_t(u8, rp->num_of_sets - 1,
>> +                                       HCI_MAX_ADV_INSTANCES);
>
> Id say if the controller cannot support as many instances as the host
> stack then we should keep using the software based scheduler, another
> option would be to let the user select what scheduler it wants to use
> since with host based scheduler it may get a much more consistent
> behavior than with controller based which is especially important for
> beacons.
>

So do we need a new mgmt API for selecting the scheduler (host or controller) ?

>> +}
>> +
>>  static void hci_cc_le_read_white_list_size(struct hci_dev *hdev,
>>                                            struct sk_buff *skb)
>>  {
>> @@ -3128,6 +3144,10 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb,
>>                 hci_cc_le_set_ext_scan_enable(hdev, skb);
>>                 break;
>>
>> +       case HCI_OP_LE_READ_NUM_SUPPORTED_ADV_SETS:
>> +               hci_cc_le_read_num_adv_sets(hdev, skb);
>> +               break;
>> +
>>         default:
>>                 BT_DBG("%s opcode 0x%4.4x", hdev->name, *opcode);
>>                 break;
>> diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
>> index 07a3cc2..ffd5f7b 100644
>> --- a/net/bluetooth/mgmt.c
>> +++ b/net/bluetooth/mgmt.c
>> @@ -5998,7 +5998,7 @@ static int read_adv_features(struct sock *sk, struct hci_dev *hdev,
>>         rp->supported_flags = cpu_to_le32(supported_flags);
>>         rp->max_adv_data_len = HCI_MAX_AD_LENGTH;
>>         rp->max_scan_rsp_len = HCI_MAX_AD_LENGTH;
>> -       rp->max_instances = HCI_MAX_ADV_INSTANCES;
>> +       rp->max_instances = hdev->le_no_of_adv_sets;
>>         rp->num_instances = hdev->adv_instance_cnt;
>>
>>         instance = rp->instance;
>> @@ -6187,7 +6187,7 @@ static int add_advertising(struct sock *sk, struct hci_dev *hdev,
>>                 return mgmt_cmd_status(sk, hdev->id, MGMT_OP_ADD_ADVERTISING,
>>                                        status);
>>
>> -       if (cp->instance < 1 || cp->instance > HCI_MAX_ADV_INSTANCES)
>> +       if (cp->instance < 1 || cp->instance > hdev->le_no_of_adv_sets)
>>                 return mgmt_cmd_status(sk, hdev->id, MGMT_OP_ADD_ADVERTISING,
>>                                        MGMT_STATUS_INVALID_PARAMS);
>>
>> @@ -6422,7 +6422,7 @@ static int get_adv_size_info(struct sock *sk, struct hci_dev *hdev,
>>                 return mgmt_cmd_status(sk, hdev->id, MGMT_OP_GET_ADV_SIZE_INFO,
>>                                        MGMT_STATUS_REJECTED);
>>
>> -       if (cp->instance < 1 || cp->instance > HCI_MAX_ADV_INSTANCES)
>> +       if (cp->instance < 1 || cp->instance > hdev->le_no_of_adv_sets)
>>                 return mgmt_cmd_status(sk, hdev->id, MGMT_OP_GET_ADV_SIZE_INFO,
>>                                        MGMT_STATUS_INVALID_PARAMS);
>>

Thanks,
Jaganath
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux