From: Prameela Rani Garnepudi <prameela.j04cs@xxxxxxxxx>
Redpine bluetooth driver is a thin driver which depends on
'rsi_91x' driver for transmitting and receiving packets
to/from device. It creates hci interface when attach() is
called from 'rsi_91x' module.
Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@xxxxxxxxx>
Signed-off-by: Siva Rebbagondla <siva.rebbagondla@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Amitkumar Karwar <amit.karwar@xxxxxxxxxxxxxxxxxx>
---
drivers/bluetooth/Kconfig | 12 ++
drivers/bluetooth/Makefile | 2 +
drivers/bluetooth/btrsi.c | 268 ++++++++++++++++++++++++++++++++++++++++++++
drivers/bluetooth/rsi_hci.h | 51 +++++++++
4 files changed, 333 insertions(+)
create mode 100644 drivers/bluetooth/btrsi.c
create mode 100644 drivers/bluetooth/rsi_hci.h
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 60e1c7d..ca58d74 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -378,4 +378,16 @@ config BT_QCOMSMD
Say Y here to compile support for HCI over Qualcomm SMD into the
kernel or say M to compile as a module.
+config BT_RSI
+ tristate "Redpine HCI support"
+ depends on BT && BT_RFCOMM
+ default m
+ help
+ Redpine BT driver.
+ This driver handles BT traffic from upper layers and pass
+ to the RSI_91x coex module for further scheduling to device
+
+ Say Y here to compile support for HCI over Qualcomm SMD into the
+ kernel or say M to compile as a module.
+
endmenu
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index 4e4e44d..712af83a 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -28,6 +28,8 @@ obj-$(CONFIG_BT_QCA) += btqca.o
obj-$(CONFIG_BT_HCIUART_NOKIA) += hci_nokia.o
+obj-$(CONFIG_BT_RSI) += btrsi.o
+
btmrvl-y := btmrvl_main.o
btmrvl-$(CONFIG_DEBUG_FS) += btmrvl_debugfs.o
diff --git a/drivers/bluetooth/btrsi.c b/drivers/bluetooth/btrsi.c
new file mode 100644
index 0000000..c52f418
--- /dev/null
+++ b/drivers/bluetooth/btrsi.c
@@ -0,0 +1,268 @@
+/**
+ * Copyright (c) 2017 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+e* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include "rsi_hci.h"
+
+static struct rsi_mod_ops rsi_bt_ops = {
+ .attach = rsi_hci_attach,
+ .detach = rsi_hci_detach,
+ .recv_pkt = rsi_hci_recv_pkt,
+};
+
+static int rsi_hci_open(struct hci_dev *hdev)
+{
+ BT_INFO("%s open\n", hdev->name);
+
+ return 0;
+}
+
+static int rsi_hci_close(struct hci_dev *hdev)
+{
+ BT_INFO("%s closed\n", hdev->name);
+
+ return 0;
+}
+
+static int rsi_hci_flush(struct hci_dev *hdev)
+{
+ BT_ERR("%s flush\n", hdev->name);
+
+ return 0;
+}
+
+static int rsi_hci_send_pkt(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct rsi_hci_adapter *h_adapter;
+ struct sk_buff *new_skb = NULL;
+
+ int status = 0;
+
+ h_adapter = hci_get_drvdata(hdev);
+ if (!h_adapter) {
+ status = -EFAULT;
+ goto fail;
+ }
+
+ if (h_adapter->fsm_state != RSI_BT_FSM_DEVICE_READY) {
+ BT_INFO("BT Device not ready\n");
+ status = -ENODEV;
+ goto fail;
+ }
+
+ if (!test_bit(HCI_RUNNING, &hdev->flags)) {
+ status = -EBUSY;
+ goto fail;
+ }
+
+ switch (bt_cb(skb)->pkt_type) {
+ case HCI_COMMAND_PKT:
+ hdev->stat.cmd_tx++;
+ break;
+
+ case HCI_ACLDATA_PKT:
+ hdev->stat.acl_tx++;
+ break;
+
+ case HCI_SCODATA_PKT:
+ hdev->stat.sco_tx++;
+ break;
+
+ default:
+ dev_kfree_skb(skb);
+ status = -EILSEQ;
+ goto fail;
+ }
+
+ if (skb_headroom(skb) < RSI_HEADROOM_FOR_BT_HAL) {
+ /* Re-allocate one more skb with sufficent headroom */
+ /* Space for Descriptor (16 bytes) is required in head room */
+ u16 new_len = skb->len + RSI_HEADROOM_FOR_BT_HAL;
+
+ new_skb = dev_alloc_skb(new_len);
+ if (!new_skb) {
+ dev_kfree_skb(skb);
+ return -ENOMEM;
+ }
+ skb_reserve(new_skb, RSI_HEADROOM_FOR_BT_HAL);
+ skb_put(new_skb, skb->len);
+ memcpy(new_skb->data, skb->data, skb->len);
+ bt_cb(new_skb)->pkt_type = bt_cb(skb)->pkt_type;
+ dev_kfree_skb(skb);
+ skb = new_skb;
+ }
+ if (h_adapter->proto_ops->coex_send_pkt)
+ return h_adapter->proto_ops->coex_send_pkt(h_adapter->priv, skb,
+ RSI_BT_Q);
+
+fail:
+ dev_kfree_skb(skb);
+ return status;
+}
+
+int rsi_hci_recv_pkt(void *priv, u8 *pkt)
+{
+ struct rsi_hci_adapter *h_adapter = (struct rsi_hci_adapter *)priv;
+ struct hci_dev *hdev = NULL;
+ struct sk_buff *skb;
+ int pkt_len = (le16_to_cpu(*(__le16 *)pkt)) & 0x0fff;
+ u8 queue_no = (le16_to_cpu(*(__le16 *)pkt) & 0x7000) >> 12;
+
+ if (h_adapter->fsm_state != RSI_BT_FSM_DEVICE_READY) {
+ BT_INFO("BT Device not ready\n");
+ return 0;
+ }
+
+ if (queue_no == RSI_BT_MGMT_Q) {
+ u8 msg_type = pkt[14] & 0xFF;
+
+ switch (msg_type) {
+ case RSI_RESULT_CONFIRM:
+ BT_INFO("BT Result Confirm\n");
+ return 0;
+ case RSI_BT_BER:
+ BT_INFO("BT Ber\n");
+ return 0;
+ case RSI_BT_CW:
+ BT_INFO("BT CW\n");
+ return 0;
+ default:
+ break;
+ }
+ }
+
+ skb = dev_alloc_skb(pkt_len);
+ if (!skb)
+ return -ENOMEM;
+
+ hdev = h_adapter->hdev;
+ memcpy(skb->data, pkt + RSI_FRAME_DESC_SIZE, pkt_len);
+ skb_put(skb, pkt_len);
+ h_adapter->hdev->stat.byte_rx += skb->len;
+
+ skb->dev = (void *)hdev;
+ bt_cb(skb)->pkt_type = pkt[14];
+
+ return hci_recv_frame(hdev, skb);
+}
+EXPORT_SYMBOL_GPL(rsi_hci_recv_pkt);
+
+int rsi_hci_attach(void *priv, struct rsi_proto_ops *ops)
+{
+ struct rsi_hci_adapter *h_adapter = NULL;
+ struct hci_dev *hdev;
+ int status = 0;
+
+ h_adapter = kzalloc(sizeof(*h_adapter), GFP_KERNEL);
+ if (!h_adapter)
+ return -ENOMEM;
+
+ h_adapter->priv = priv;
+ ops->set_bt_context(priv, h_adapter);
+ h_adapter->proto_ops = ops;
+ ops->bt_ops = &rsi_bt_ops;
+ h_adapter->fsm_state = RSI_BT_FSM_DEVICE_READY;
+
+ hdev = hci_alloc_dev();
+ if (!hdev) {
+ BT_ERR("Failed to alloc HCI device\n");
+ goto err;
+ }
+ h_adapter->hdev = hdev;
+
+ if (ops->get_host_intf(priv) == RSI_HOST_INTF_SDIO)
+ hdev->bus = HCI_SDIO;
+ else
+ hdev->bus = HCI_USB;
+
+ hci_set_drvdata(hdev, h_adapter);
+ hdev->dev_type = HCI_PRIMARY;
+ hdev->open = rsi_hci_open;
+ hdev->close = rsi_hci_close;
+ hdev->flush = rsi_hci_flush;
+ hdev->send = rsi_hci_send_pkt;
+
+ status = hci_register_dev(hdev);
+ if (status < 0) {
+ BT_ERR("%s: HCI registration failed with errcode %d\n",
+ __func__, status);
+ goto err;
+ }
+
+ BT_INFO("%s interface created\n", hdev->name);
+
+ h_adapter->fsm_state = RSI_BT_FSM_DEVICE_READY;
+
+ return 0;
+
+err:
+ if (hdev) {
+ hci_unregister_dev(hdev);
+ hci_free_dev(hdev);
+ h_adapter->hdev = NULL;
+ }
+ kfree(h_adapter);
+
+ return -EINVAL;
+}
+
+void rsi_hci_detach(void *priv)
+{
+ struct rsi_hci_adapter *h_adapter = (struct rsi_hci_adapter *)priv;
+ struct hci_dev *hdev;
+
+ if (!h_adapter)
+ return;
+
+ hdev = h_adapter->hdev;
+
+ BT_INFO("Detaching %s\n", hdev->name);
+
+ if (hdev) {
+ hci_unregister_dev(hdev);
+ hci_free_dev(hdev);
+ h_adapter->hdev = NULL;
+ }
+
+ kfree(h_adapter);
+ h_adapter->fsm_state = RSI_BT_FSM_DEVICE_NOT_READY;
+}
+
+struct rsi_mod_ops *rsi_get_hci_ops(void)
+{
+ return &rsi_bt_ops;
+};
+EXPORT_SYMBOL_GPL(rsi_get_hci_ops);
+
+static int rsi_91x_bt_module_init(void)
+{
+ BT_INFO("%s: BT Module init called\n", __func__);
+
+ return 0;
+}
+
+static void rsi_91x_bt_module_exit(void)
+{
+ BT_INFO("%s: BT Module exit called\n", __func__);
+}
+
+module_init(rsi_91x_bt_module_init);
+module_exit(rsi_91x_bt_module_exit);
+MODULE_AUTHOR("Redpine Signals Inc");
+MODULE_DESCRIPTION("RSI BT driver");
+MODULE_SUPPORTED_DEVICE("RSI-BT");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/bluetooth/rsi_hci.h b/drivers/bluetooth/rsi_hci.h
new file mode 100644
index 0000000..6f44231
--- /dev/null
+++ b/drivers/bluetooth/rsi_hci.h
@@ -0,0 +1,51 @@
+/**
+ * Copyright (c) 2017 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_HCI_H__
+#define __RSI_HCI_H__
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+#include <linux/rsi_header.h>
+#include <net/genetlink.h>
+
+/* RX frame types */
+#define RSI_RESULT_CONFIRM 0x80
+#define RSI_BT_PER 0x10
+#define RSI_BT_BER 0x11
+#define RSI_BT_CW 0x12
+
+#define RSI_HEADROOM_FOR_BT_HAL 16
+
+enum bt_fsm_state {
+ RSI_BT_FSM_DEVICE_NOT_READY = 0,
+ RSI_BT_FSM_DEVICE_READY,
+};
+
+struct rsi_hci_adapter {
+ void *priv;
+ struct rsi_proto_ops *proto_ops;
+ enum bt_fsm_state fsm_state;
+ struct hci_dev *hdev;
+};
+
+#define RSI_FRAME_DESC_SIZE 16
+
+int rsi_hci_attach(void *priv, struct rsi_proto_ops *ops);
+void rsi_hci_detach(void *priv);
+int rsi_hci_recv_pkt(void *data, u8 *pkt);
+
+#endif
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
