ACPI and DT both need SERIAL_DEV_CTRL_TTYPORT to work properly since SERIAL_DEV_CTRL_TTYPORT is the only controller implemented for serdev. This is only possible if serdev support is compiled in as the code hooks into TTY. Otherwise PM will silently break as the corresponding platform devices would no longer be registered and as the tty class device is also gone and hciattach (btattach) will also fail. This patch set addresses this by making BT_HCIUART_BCM dependent on SERIAL_DEV_CTRL_TTYPORT which in turn is dependent on SERIAL_DEV_BUS and ensures that if SERIAL_DEV_BUS is selected is the code is build it. Signed-off-by: Ian W MORRISON <ianwmorrison@xxxxxxxxx> --- drivers/tty/serdev/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serdev/Kconfig b/drivers/tty/serdev/Kconfig index cdc6b820cf93..1144f4db5087 100644 --- a/drivers/tty/serdev/Kconfig +++ b/drivers/tty/serdev/Kconfig @@ -2,7 +2,7 @@ # Serial bus device driver configuration # menuconfig SERIAL_DEV_BUS - tristate "Serial device bus" + bool "Serial device bus" help Core support for devices connected via a serial port. @@ -11,6 +11,6 @@ if SERIAL_DEV_BUS config SERIAL_DEV_CTRL_TTYPORT bool "Serial device TTY port controller" depends on TTY - depends on SERIAL_DEV_BUS != m + depends on SERIAL_DEV_BUS endif -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
