Re: SEGFAULT in bluetoothd after pairing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/08, Per Waagø wrote:
> Hi Luiz,
> 
> 
> On 08. aug. 2017 12:46, Luiz Augusto von Dentz wrote:
> >Hi Per,
> >
> >On Tue, Aug 8, 2017 at 1:19 PM, Per Waagø <pwaago@xxxxxxxxx> wrote:
> >>I am working on implementing bluetooth headset support on a system with a
> >>Marvell 88W8787 chip. Starting with bluez 5.44 bluetoothd is segfaulting
> >>every time I pair with some headset models. I have done a git bisect and
> >>found that the behavior was introduced with this commit: "f2483bbfd core:
> >>Fix passing correct local address type to ATT socket"
> >>
> >>This commit changes some initializations of BT_IO_OPT_SOURCE_TYPE that used
> >>to be hard coded to BDADDR_LE_PUBLIC to be read from the adapter struct
> >>instead, using the new btd_adapter_get_address_type function. The
> >>address_type of the adapter is set based on the MGMT_SETTING_LE flag. The
> >>8787 doesn't support bluetooth LE, so address type is set to BDADDR_BREDR.
> >>
> >>Reverting this chunk eliminates the problem:
> >>--- a/src/gatt-database.c
> >>+++ b/src/gatt-database.c
> >>@@ -2603,7 +2603,8 @@ struct btd_gatt_database *btd_gatt_database_new(struct
> >>btd_adapter *adapter)
> >>         addr = btd_adapter_get_address(adapter);
> >>         database->le_io = bt_io_listen(connect_cb, NULL, NULL, NULL, &gerr,
> >>                                         BT_IO_OPT_SOURCE_BDADDR, addr,
> >>-                                       BT_IO_OPT_SOURCE_TYPE,
> >>BDADDR_LE_PUBLIC,
> >>+                                       BT_IO_OPT_SOURCE_TYPE,
> >>+ btd_adapter_get_address_type(adapter),
> >>                                         BT_IO_OPT_CID, ATT_CID,
> >>                                         BT_IO_OPT_SEC_LEVEL, BT_IO_SEC_LOW,
> >>                                         BT_IO_OPT_INVALID);
> >>
> >>The source type eventually end up as l2_bdaddr_type in the address assigned
> >>to the listening socket. From the debug logs I see the connect_cb in
> >>gatt-database.c is called. This does not happen when the source type is set
> >>to LE_PUBLIC.
> >The headset is most likely trying to connect ATT over BR/EDR which
> >perhaps has some unexpected behavior, though we did have some fixes in
> >this regard so please try with latest upstream.
> I did my testing on latest upstream as of Friday. I rebased now and retested
> just to be sure,
> with the same result.

Exactly same issue as I have observed and reported some time ago
https://www.spinics.net/lists/linux-bluetooth/msg70176.html

Mine was with Sony SBH52 headset, Per what kind of headsets are
triggering this behavior on your side?

Best,
K

> 
> >>Unfortunately, I haven't been able to get a sensible stack trace. Debug logs
> >>from pairing is requested until segfault is pasted at the bottom of the
> >>email.
> >>
> >>Any guidance on how to resolve this issue is highly appreciated.
> >>
> >>Best regards,
> >>
> >>Per
> >>
> >>--
> >>src/device.c:btd_device_set_temporary() temporary 0
> >>src/agent.c:agent_ref() 0xda708: ref=2
> >>src/device.c:bonding_request_new() Requesting bonding for 50:1A:A5:D6:6C:7E
> >>src/agent.c:agent_ref() 0xda708: ref=3
> >>src/agent.c:agent_unref() 0xda708: ref=2
> >>src/adapter.c:suspend_discovery()
> >>src/adapter.c:adapter_bonding_attempt() hci0 bdaddr 50:1A:A5:D6:6C:7E type 0
> >>io_cap 0x03
> >>src/adapter.c:add_whitelist_complete() 50:1A:A5:D6:6C:7E added to kernel
> >>whitelist
> >>src/adapter.c:connected_callback() hci0 device 50:1A:A5:D6:6C:7E connected
> >>eir_len 22
> >>src/adapter.c:new_link_key_callback() hci0 new key for 50:1A:A5:D6:6C:7E
> >>type 4 pin_len 0 store_hint 1
> >>src/device.c:device_set_bonded()
> >>src/device.c:device_bonding_complete() bonding 0xd8490 status 0x00
> >>src/device.c:device_bonding_complete() Proceeding with service discovery
> >>src/agent.c:agent_unref() 0xda708: ref=1
> >>src/adapter.c:resume_discovery()
> >>src/adapter.c:pair_device_complete() Success (0x00)
> >>src/adapter.c:bonding_attempt_complete() hci0 bdaddr 50:1A:A5:D6:6C:7E type
> >>0 status 0x0
> >>src/device.c:device_bonding_complete() bonding (nil) status 0x00
> >>src/adapter.c:resume_discovery()
> >>src/gatt-database.c:connect_cb() New incoming BR/EDR ATT connection
> >>attrib/gattrib.c:g_attrib_ref() 0xf7470: g_attrib_ref=1
> >>src/device.c:load_gatt_db() Restoring 50:1A:A5:D6:6C:7E gatt database from
> >>file
> >>No cache for 50:1A:A5:D6:6C:7E
> >>src/gatt-client.c:btd_gatt_client_connected() Device connected.
> >>src/device.c:gatt_debug() Primary service discovery failed. ATT ECODE: 0x0a
> >>src/device.c:gatt_client_ready_cb() status: success, error: 0
> >>src/gatt-client.c:btd_gatt_client_ready() GATT client ready
> >>src/gatt-client.c:create_services() Exporting objects for GATT services:
> >>50:1A:A5:D6:6C:7E
> >>src/device.c:device_svc_resolved() /org/bluez/hci0/dev_50_1A_A5_D6_6C_7E err
> >>0
> >>
> >>--
> >>To unsubscribe from this list: send the line "unsubscribe linux-bluetooth"
> >>in
> >>the body of a message to majordomo@xxxxxxxxxxxxxxx
> >>More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >
> >
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux