On 30/06/17 18:02, Marcel Holtmann wrote: > If you have an embedded board with a proper DT definition, and the > UART is hard-wired to the Bluetooth chip, then go for serdev. It > means no btattach is needed. The kernel will enumerate this properly > for you. That is the way forward. Someone needed to adapt the > hci_bcm.c driver for this anyway. It just happens that you are the > first one. Right - I'll follow that route and add serdev support to hci_bcm.c then! Thanks, -Ian -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
