From: Tedd Ho-Jeong An <tedd.an@xxxxxxxxx>
The format of Intel Bluetooth firmware for bootloader product is
ibt-<hw_variant>-<device_revision_id>.sfi and .ddc.
This patch uses a hw_variant value read from the device during
runtime to form the firmware filenames instead of using a constant
value, so it can support multiple prouducts.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@xxxxxxxxx>
---
drivers/bluetooth/hci_intel.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
index 351e868..63970d0 100644
--- a/drivers/bluetooth/hci_intel.c
+++ b/drivers/bluetooth/hci_intel.c
@@ -704,11 +704,14 @@ static int intel_setup(struct hci_uart *hu)
/* With this Intel bootloader only the hardware variant and device
* revision information are used to select the right firmware.
*
- * Currently this bootloader support is limited to hardware variant
- * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b).
+ * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi.
+ *
+ * Currently the supported hardware variants are:
+ * 11 (0x0b) for iBT3.0 (LnP/SfP)
*/
- snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.sfi",
- le16_to_cpu(params->dev_revid));
+ snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.sfi",
+ le16_to_cpu(ver.hw_variant),
+ le16_to_cpu(params->dev_revid));
err = request_firmware(&fw, fwname, &hdev->dev);
if (err < 0) {
@@ -721,8 +724,9 @@ static int intel_setup(struct hci_uart *hu)
bt_dev_info(hdev, "Found device firmware: %s", fwname);
/* Save the DDC file name for later */
- snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.ddc",
- le16_to_cpu(params->dev_revid));
+ snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.ddc",
+ le16_to_cpu(ver.hw_variant),
+ le16_to_cpu(params->dev_revid));
kfree_skb(skb);
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
