From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
The Qualcomm WCNSS chip provides two SMD channels to the BT core; one
for command and one for event packets. This driver exposes the two
channels as a hci device.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
Due to timing issues with the combo chip firmware boot process I had to move
things around slighly. So this driver is now probed by the wcnss_ctrl driver,
once the firmware have signaled that boot is completed.
The wcnss_ctrl changes are merged in v4.8, as is the devicetree binding for
this part (soc/qcom/qcom,wcnss.txt)
Changes since v2:
- This is now a child of wcnss_ctrl
- Added missing kfree_skb() in btqcomsmd_send()
drivers/bluetooth/Kconfig | 12 +++
drivers/bluetooth/Makefile | 1 +
drivers/bluetooth/btqcomsmd.c | 183 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 196 insertions(+)
create mode 100644 drivers/bluetooth/btqcomsmd.c
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index cf50fd2e96df..aaf1719623b0 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -169,6 +169,18 @@ config BT_HCIUART_QCA
Say Y here to compile support for QCA protocol.
+config BT_QCOMSMD
+ tristate "Qualcomm SMD based HCI support"
+ depends on QCOM_SMD
+ select BT_QCA
+ help
+ Qualcomm SMD based HCI driver.
+ This driver is used to bridge HCI data onto the shared memory
+ channels to the WCNSS core.
+
+ Say Y here to compile support for HCI over Qualcomm SMD into the
+ kernel or say M to compile as a module.
+
config BT_HCIUART_AG6XX
bool "Intel AG6XX protocol support"
depends on BT_HCIUART
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index 9c18939fc5c9..c31fc01acc7a 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_BT_WILINK) += btwilink.o
obj-$(CONFIG_BT_BCM) += btbcm.o
obj-$(CONFIG_BT_RTL) += btrtl.o
obj-$(CONFIG_BT_QCA) += btqca.o
+obj-$(CONFIG_BT_QCOMSMD) += btqcomsmd.o
btmrvl-y := btmrvl_main.o
btmrvl-$(CONFIG_DEBUG_FS) += btmrvl_debugfs.o
diff --git a/drivers/bluetooth/btqcomsmd.c b/drivers/bluetooth/btqcomsmd.c
new file mode 100644
index 000000000000..a163e3fc5766
--- /dev/null
+++ b/drivers/bluetooth/btqcomsmd.c
@@ -0,0 +1,183 @@
+/*
+ * Copyright (c) 2016, Linaro Ltd.
+ * Copyright (c) 2015, Sony Mobile Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/soc/qcom/smd.h>
+#include <linux/soc/qcom/wcnss_ctrl.h>
+#include <linux/platform_device.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+#include <net/bluetooth/hci.h>
+#include "btqca.h"
+
+struct btqcomsmd {
+ struct hci_dev *hdev;
+
+ struct qcom_smd_channel *acl_channel;
+ struct qcom_smd_channel *cmd_channel;
+};
+
+static int btqcomsmd_recv(struct hci_dev *hdev, unsigned int type,
+ const void *data, size_t count)
+{
+ struct sk_buff *skb;
+
+ /* Use GFP_ATOMIC as we're in IRQ context */
+ skb = bt_skb_alloc(count, GFP_ATOMIC);
+ if (!skb) {
+ hdev->stat.err_rx++;
+ return -ENOMEM;
+ }
+
+ bt_cb(skb)->pkt_type = type;
+ memcpy(skb_put(skb, count), data, count);
+
+ return hci_recv_frame(hdev, skb);
+}
+
+static int btqcomsmd_acl_callback(struct qcom_smd_channel *channel,
+ const void *data,
+ size_t count)
+{
+ struct btqcomsmd *btq = qcom_smd_get_drvdata(channel);
+
+ btq->hdev->stat.byte_rx += count;
+ return btqcomsmd_recv(btq->hdev, HCI_ACLDATA_PKT, data, count);
+}
+
+static int btqcomsmd_cmd_callback(struct qcom_smd_channel *channel,
+ const void *data,
+ size_t count)
+{
+ struct btqcomsmd *btq = qcom_smd_get_drvdata(channel);
+
+ return btqcomsmd_recv(btq->hdev, HCI_EVENT_PKT, data, count);
+}
+
+static int btqcomsmd_send(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct btqcomsmd *btq = hci_get_drvdata(hdev);
+ int ret;
+
+ switch (bt_cb(skb)->pkt_type) {
+ case HCI_ACLDATA_PKT:
+ ret = qcom_smd_send(btq->acl_channel, skb->data, skb->len);
+ hdev->stat.acl_tx++;
+ hdev->stat.byte_tx += skb->len;
+ break;
+ case HCI_COMMAND_PKT:
+ ret = qcom_smd_send(btq->cmd_channel, skb->data, skb->len);
+ hdev->stat.cmd_tx++;
+ break;
+ default:
+ ret = -EILSEQ;
+ break;
+ }
+
+ kfree_skb(skb);
+
+ return ret;
+}
+
+static int btqcomsmd_open(struct hci_dev *hdev)
+{
+ return 0;
+}
+
+static int btqcomsmd_close(struct hci_dev *hdev)
+{
+ return 0;
+}
+
+static int btqcomsmd_probe(struct platform_device *pdev)
+{
+ struct btqcomsmd *btq;
+ struct hci_dev *hdev;
+ void *wcnss;
+ int ret;
+
+ btq = devm_kzalloc(&pdev->dev, sizeof(*btq), GFP_KERNEL);
+ if (!btq)
+ return -ENOMEM;
+
+ wcnss = dev_get_drvdata(pdev->dev.parent);
+
+ btq->acl_channel = qcom_wcnss_open_channel(wcnss, "APPS_RIVA_BT_ACL",
+ btqcomsmd_acl_callback);
+ if (IS_ERR(btq->acl_channel))
+ return PTR_ERR(btq->acl_channel);
+
+ btq->cmd_channel = qcom_wcnss_open_channel(wcnss, "APPS_RIVA_BT_CMD",
+ btqcomsmd_cmd_callback);
+ if (IS_ERR(btq->cmd_channel))
+ return PTR_ERR(btq->cmd_channel);
+
+ qcom_smd_set_drvdata(btq->acl_channel, btq);
+ qcom_smd_set_drvdata(btq->cmd_channel, btq);
+
+ hdev = hci_alloc_dev();
+ if (!hdev)
+ return -ENOMEM;
+
+ hci_set_drvdata(hdev, btq);
+ btq->hdev = hdev;
+ SET_HCIDEV_DEV(hdev, &pdev->dev);
+
+ hdev->bus = HCI_SMD;
+ hdev->open = btqcomsmd_open;
+ hdev->close = btqcomsmd_close;
+ hdev->send = btqcomsmd_send;
+ hdev->set_bdaddr = qca_set_bdaddr_rome;
+
+ ret = hci_register_dev(hdev);
+ if (ret < 0) {
+ hci_free_dev(hdev);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, btq);
+
+ return 0;
+}
+
+static int btqcomsmd_remove(struct platform_device *pdev)
+{
+ struct btqcomsmd *btq = platform_get_drvdata(pdev);
+
+ hci_unregister_dev(btq->hdev);
+ hci_free_dev(btq->hdev);
+
+ return 0;
+}
+
+static const struct of_device_id btqcomsmd_of_match[] = {
+ { .compatible = "qcom,wcnss-bt", },
+ { },
+};
+
+static struct platform_driver btqcomsmd_driver = {
+ .probe = btqcomsmd_probe,
+ .remove = btqcomsmd_remove,
+ .driver = {
+ .name = "btqcomsmd",
+ .of_match_table = btqcomsmd_of_match,
+ },
+};
+
+module_platform_driver(btqcomsmd_driver);
+
+MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Qualcomm SMD HCI driver");
+MODULE_LICENSE("GPL v2");
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
