Hi Johannes, On Wed, Aug 10, 2016, Kropf Johannes wrote: > Here is the whole log: Thanks. I'll filter it so only the relevant stuff (SMP) is present: > > ACL Data RX: Handle 70 flags 0x02 dlen 6 [hci0] 28.145172 > SMP: Security Request (0x0b) len 1 > Authentication requirement: Bonding, No MITM, Legacy, No Keypresses (0x01) > < ACL Data TX: Handle 70 flags 0x00 dlen 11 [hci0] 28.209526 > SMP: Pairing Request (0x01) len 6 > IO capability: NoInputNoOutput (0x03) > OOB data: Authentication data not present (0x00) > Authentication requirement: Bonding, No MITM, SC, No Keypresses (0x09) > Max encryption key size: 16 > Initiator key distribution: EncKey Sign LinkKey (0x0d) > Responder key distribution: EncKey IdKey Sign LinkKey (0x0f) > > ACL Data RX: Handle 70 flags 0x02 dlen 11 [hci0] 28.348460 > SMP: Pairing Response (0x02) len 6 > IO capability: NoInputNoOutput (0x03) > OOB data: Authentication data not present (0x00) > Authentication requirement: Bonding, No MITM, Legacy, No Keypresses (0x01) > Max encryption key size: 16 > Initiator key distribution: EncKey Sign (0x05) > Responder key distribution: EncKey IdKey Sign (0x07) > < ACL Data TX: Handle 70 flags 0x00 dlen 21 [hci0] 28.348510 > SMP: Pairing Confirm (0x03) len 16 > Confim value: 12bd199ba4739a017395109cfa4621b3 > > ACL Data RX: Handle 70 flags 0x02 dlen 21 [hci0] 28.488508 > SMP: Pairing Confirm (0x03) len 16 > Confim value: 41f5f7a6212356d0eefa268f7994844a > < ACL Data TX: Handle 70 flags 0x00 dlen 21 [hci0] 28.488545 > SMP: Pairing Random (0x04) len 16 > Random value: 4e8d532caf34ab845ff243acf6a0a681 > > ACL Data RX: Handle 70 flags 0x02 dlen 6 [hci0] 28.628456 > SMP: Pairing Failed (0x05) len 1 > Reason: Confirm value failed (0x04) > < HCI Command: Disconnect (0x01|0x0006) plen 3 [hci0] 28.628506 > Handle: 70 > Reason: Authentication Failure (0x05) > @ Authentication Failed: 5C:31:3E:5E:54:5E (1) status 0x05 That "Confirm value failed" response still looks like something strange is happening on the remote side - maybe a bug there. Unfortunately I don't really have any other ideas except going for raw bisecting here if you have a kernel version this did work with. The inputs to the function that generates the confirm value are the local and remote public keys and the random number that was sent over the air, so there's not much that can go wrong there - also nothing I can remember that would have changed on the Linux side regarding this for a long time. This of course assumes that the remote device is using this error code correctly and doesn't send it for some other condition. Johan -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
