The dt binding document for Marvell bt-sd8897 specify the
'marvell,wakeup-pin' and 'marvell,wakeup-gap-ms' attributes to be a 32-bit
value, but the driver parse it as 16-bit instead. Fix this to meet the
dt-binding document, and to be consistent with the 'marvell,wakeup-pin'
property in the mwifiex driver.
Signed-off-by: Wei-Ning Huang <wnhuang@xxxxxxxxxxxx>
---
drivers/bluetooth/btmrvl_main.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index 7ad8d61..b6d3404 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -513,21 +513,21 @@ static int btmrvl_check_device_tree(struct btmrvl_private *priv)
struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
u8 cal_data[BT_CAL_HDR_LEN + BT_CAL_DATA_SIZE];
int ret = 0;
- u16 gpio, gap;
+ u32 gpio, gap;
if (card->plt_of_node) {
dt_node = card->plt_of_node;
- ret = of_property_read_u16(dt_node, "marvell,wakeup-pin",
+ ret = of_property_read_u32(dt_node, "marvell,wakeup-pin",
&gpio);
if (ret)
gpio = (priv->btmrvl_dev.gpio_gap & 0xff00) >> 8;
- ret = of_property_read_u16(dt_node, "marvell,wakeup-gap-ms",
+ ret = of_property_read_u32(dt_node, "marvell,wakeup-gap-ms",
&gap);
if (ret)
gap = (u8)(priv->btmrvl_dev.gpio_gap & 0x00ff);
- priv->btmrvl_dev.gpio_gap = (gpio << 8) + gap;
+ priv->btmrvl_dev.gpio_gap = ((gpio & 0xff) << 8) + (gap & 0xff);
ret = of_property_read_u8_array(dt_node, "marvell,cal-data",
cal_data + BT_CAL_HDR_LEN,
--
2.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
