Hi Amitkumar, > This patch implement firmware download feature for > Marvell Bluetooth devices. If firmware is already > downloaded, it will skip downloading. > > Signed-off-by: Ganapathi Bhat <gbhat@xxxxxxxxxxx> > Signed-off-by: Amitkumar Karwar <akarwar@xxxxxxxxxxx> > --- > v2: Fixed compilation warning reported by kbuild test robot > v3: Addressed review comments from Marcel Holtmann > a) Removed vendor specific code from hci_ldisc.c > b) Get rid of static forward declaration > c) Removed unnecessary heavy nesting > d) Git rid of module parameter and global variables > e) Add logic to pick right firmware image > v4: Addresses review comments from Alan > a) Use existing kernel helper APIs instead of writing own. > b) Replace mdelay() with msleep() > v5: Addresses review comments from Loic Poulain > a) Use bt_dev_err/warn/dbg helpers insted of BT_ERR/WARN/DBG > b) Used static functions where required and removed forward delcarations > c) Edited comments for the function hci_uart_recv_data > d) Made HCI_UART_DNLD_FW flag a part of driver private data > v6: Addresses review comments from Loic Poulain > a) Used skb instead of array to store firmware data during download > b) Used hci_uart_tx_wakeup and enqueued packets instead of tty write > c) Used GFP_KERNEL instead of GFP_ATOMIC > v7: Edited Kconfig to add dependency for BT_HCIUART_H4. The change resolves > errors reported by kbuild test robot. > v8: Addressed review comments from Marcel Holtmann > a) Removed unnecessary memory allocation failure messages > b) Get rid of btmrvl.h header file and add definitions in hci_mrvl.c file > v9: Addressed review comments from Marcel Holtmann > a) Moved firmware download code from setup to prepare handler. > b) Change messages from bt_dev_*->BT_*, as hdev isn't available during firmware > download. > --- > drivers/bluetooth/Kconfig | 11 + > drivers/bluetooth/Makefile | 1 + > drivers/bluetooth/hci_ldisc.c | 6 + > drivers/bluetooth/hci_mrvl.c | 547 ++++++++++++++++++++++++++++++++++++++++++ > drivers/bluetooth/hci_uart.h | 8 +- > 5 files changed, 572 insertions(+), 1 deletion(-) > create mode 100644 drivers/bluetooth/hci_mrvl.c > > diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig > index cf50fd2..daafd0c 100644 > --- a/drivers/bluetooth/Kconfig > +++ b/drivers/bluetooth/Kconfig > @@ -180,6 +180,17 @@ config BT_HCIUART_AG6XX > > Say Y here to compile support for Intel AG6XX protocol. > > +config BT_HCIUART_MRVL > + bool "Marvell protocol support" > + depends on BT_HCIUART > + select BT_HCIUART_H4 > + help > + Marvell is serial protocol for communication between Bluetooth > + device and host. This protocol is required for most Marvell Bluetooth > + devices with UART interface. > + > + Say Y here to compile support for HCI MRVL protocol. > + > config BT_HCIBCM203X > tristate "HCI BCM203x USB driver" > depends on USB > diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile > index 9c18939..364dbb6 100644 > --- a/drivers/bluetooth/Makefile > +++ b/drivers/bluetooth/Makefile > @@ -37,6 +37,7 @@ hci_uart-$(CONFIG_BT_HCIUART_INTEL) += hci_intel.o > hci_uart-$(CONFIG_BT_HCIUART_BCM) += hci_bcm.o > hci_uart-$(CONFIG_BT_HCIUART_QCA) += hci_qca.o > hci_uart-$(CONFIG_BT_HCIUART_AG6XX) += hci_ag6xx.o > +hci_uart-$(CONFIG_BT_HCIUART_MRVL) += hci_mrvl.o > hci_uart-objs := $(hci_uart-y) > > ccflags-y += -D__CHECK_ENDIAN__ > diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c > index 3ee8c0c..2b74c3a 100644 > --- a/drivers/bluetooth/hci_ldisc.c > +++ b/drivers/bluetooth/hci_ldisc.c > @@ -818,6 +818,9 @@ static int __init hci_uart_init(void) > #ifdef CONFIG_BT_HCIUART_AG6XX > ag6xx_init(); > #endif > +#ifdef CONFIG_BT_HCIUART_MRVL > + mrvl_init(); > +#endif > > return 0; > } > @@ -853,6 +856,9 @@ static void __exit hci_uart_exit(void) > #ifdef CONFIG_BT_HCIUART_AG6XX > ag6xx_deinit(); > #endif > +#ifdef CONFIG_BT_HCIUART_MRVL > + mrvl_deinit(); > +#endif > > /* Release tty registration of line discipline */ > err = tty_unregister_ldisc(N_HCI); > diff --git a/drivers/bluetooth/hci_mrvl.c b/drivers/bluetooth/hci_mrvl.c > new file mode 100644 > index 0000000..1475b34 > --- /dev/null > +++ b/drivers/bluetooth/hci_mrvl.c > @@ -0,0 +1,547 @@ > +/* Bluetooth HCI UART driver for Marvell devices > + * > + * Copyright (C) 2016, Marvell International Ltd. > + * > + * Acknowledgements: > + * This file is based on hci_h4.c, which was written > + * by Maxim Krasnyansky and Marcel Holtmann. > + * > + * This software file (the "File") is distributed by Marvell International > + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 > + * (the "License"). You may use, redistribute and/or modify this File in > + * accordance with the terms and conditions of the License, a copy of which > + * is available on the worldwide web at > + * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. > + * > + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE > + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE > + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about > + * this warranty disclaimer. > + */ > + > +#include <linux/firmware.h> > +#include <linux/tty.h> > +#include <net/bluetooth/bluetooth.h> > +#include <net/bluetooth/hci_core.h> > +#include "hci_uart.h" > + > +struct fw_data { > + wait_queue_head_t init_wait_q; > + u8 wait_fw; > + int next_len; > + u8 five_bytes[5]; > + u8 next_index; > + u8 last_ack; > + u8 expected_ack; > + struct ktermios old_termios; > + u8 chip_id; > + u8 chip_rev; > + struct sk_buff *skb; > +}; > + > +#define HCI_UART_DNLD_FW 0 > +#define MRVL_HELPER_NAME "mrvl/helper_uart_3000000.bin" > +#define MRVL_8997_CHIP_ID 0x50 > +#define MRVL_8997_FW_NAME "mrvl/uart8997_bt.bin" > +#define MRVL_MAX_FW_BLOCK_SIZE 1024 > +#define MRVL_MAX_RETRY_SEND 12 > +#define MRVL_DNLD_DELAY 100 > +#define MRVL_ACK 0x5A > +#define MRVL_NAK 0xBF > +#define MRVL_HDR_REQ_FW 0xA5 > +#define MRVL_HDR_CHIP_VER 0xAA > +#define MRVL_HCI_OP_SET_BAUD 0xFC09 > +#define MRVL_FW_HDR_LEN 5 > +#define MRVL_WAIT_TIMEOUT msecs_to_jiffies(12000) > + > +struct mrvl_data { > + struct sk_buff *rx_skb; > + struct sk_buff_head txq; > + struct fw_data *fwdata; > + unsigned long flags; > +}; > + > +static int get_cts(struct hci_uart *hu) > +{ > + struct tty_struct *tty = hu->tty; > + u32 state = tty->ops->tiocmget(tty); > + > + if (state & TIOCM_CTS) { > + bt_dev_dbg(hu->hdev, "CTS is low"); > + return 1; > + } > + bt_dev_dbg(hu->hdev, "CTS is high"); > + > + return 0; > +} > + > +/* Initialize protocol */ > +static int mrvl_open(struct hci_uart *hu) > +{ > + struct mrvl_data *mrvl; > + > + bt_dev_dbg(hu->hdev, "hu %p", hu); > + > + mrvl = kzalloc(sizeof(*mrvl), GFP_KERNEL); > + if (!mrvl) > + return -ENOMEM; > + > + skb_queue_head_init(&mrvl->txq); > + hu->priv = mrvl; > + > + return 0; > +} > + > +/* Flush protocol data */ > +static int mrvl_flush(struct hci_uart *hu) > +{ > + struct mrvl_data *mrvl = hu->priv; > + > + bt_dev_dbg(hu->hdev, "hu %p", hu); > + > + skb_queue_purge(&mrvl->txq); > + > + return 0; > +} > + > +/* Close protocol */ > +static int mrvl_close(struct hci_uart *hu) > +{ > + struct mrvl_data *mrvl = hu->priv; > + > + bt_dev_dbg(hu->hdev, "hu %p", hu); > + > + skb_queue_purge(&mrvl->txq); > + kfree_skb(mrvl->rx_skb); > + kfree(mrvl->fwdata); do you really want to keep the fwdata around until close? Wouldn't it be easier to just release it once firmware loading is done? > + hu->priv = NULL; > + kfree(mrvl); > + > + return 0; > +} > + > +/* Enqueue frame for transmittion (padding, crc, etc) */ > +static int mrvl_enqueue(struct hci_uart *hu, struct sk_buff *skb) > +{ > + struct mrvl_data *mrvl = hu->priv; > + > + if (test_bit(HCI_UART_DNLD_FW, &mrvl->flags)) > + return -EBUSY; Can this still happen with the ->prepare callback? If so, then we still have not achieved much. We need to ensure that ->enqueue is protected and not called from hci_ldisc.c core. > + > + bt_dev_dbg(hu->hdev, "hu %p skb %p", hu, skb); > + > + /* Prepend skb with frame type */ > + memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1); > + skb_queue_tail(&mrvl->txq, skb); > + > + return 0; > +} > + > +static const struct h4_recv_pkt mrvl_recv_pkts[] = { > + { H4_RECV_ACL, .recv = hci_recv_frame }, > + { H4_RECV_SCO, .recv = hci_recv_frame }, > + { H4_RECV_EVENT, .recv = hci_recv_frame }, > +}; > + > +/* Send ACK/NAK to the device */ > +static void mrvl_send_ack(struct hci_uart *hu, unsigned char ack) > +{ > + struct tty_struct *tty = hu->tty; > + > + tty->ops->write(tty, &ack, sizeof(ack)); > +} > + > +/* Validate the feedback data from device */ > +static void mrvl_pkt_complete(struct hci_uart *hu, struct sk_buff *skb) > +{ > + struct mrvl_data *mrvl = hu->priv; > + struct fw_data *fw_data = mrvl->fwdata; > + u8 buf[MRVL_FW_HDR_LEN]; > + u16 lhs, rhs; > + > + memcpy(buf, skb->data, skb->len); > + > + lhs = le16_to_cpu(*((__le16 *)(&buf[1]))); > + rhs = le16_to_cpu(*((__le16 *)(&buf[3]))); Don't we have proper get_unaligned_le16 helpers for this? And that also means you can operate directly only skb->data (after a length check of course). > + if ((lhs ^ rhs) == 0xffff) { > + mrvl_send_ack(hu, MRVL_ACK); > + fw_data->wait_fw = 1; > + fw_data->next_len = lhs; > + /*firmware download is done, send the last ack*/ Please fix the comment style here. > + if (!lhs) > + fw_data->last_ack = 1; > + > + if (unlikely(fw_data->expected_ack == MRVL_HDR_CHIP_VER)) { Drop the unlikely. That is kind pointless. > + fw_data->chip_id = *((u8 *)(&buf[1])); > + fw_data->chip_rev = *((u8 *)(&buf[2])); I would access skb->data directly and even if not, buf is already u8. > + } > + wake_up_interruptible(&fw_data->init_wait_q); > + } else { > + mrvl_send_ack(hu, MRVL_NAK); > + } > +} > + > +/* This function receives data from the uart device during firmware download. > + * Driver expects 5 bytes of data as per the protocal in the below format: > + * <HEADER><BYTE_1><BYTE_2><BYTE_3><BYTE_4> > + * BYTE_3 and BYTE_4 are compliment of BYTE_1 an BYTE_2. Data can come in chunks > + * of any length. If length received is < 5, accumulate the data in an array, > + * until we have a sequence of 5 bytes, starting with the expected HEADER. If > + * the length received is > 5 bytes, then get the first 5 bytes, starting with > + * the HEADER and process the same, ignoring the rest of the bytes as per the > + * protocal. > + */ > +static struct sk_buff *mrvl_process_fw_data(struct hci_uart *hu, > + struct sk_buff *skb, > + u8 *buf, int count) > +{ > + struct mrvl_data *mrvl = hu->priv; > + struct fw_data *fw_data = mrvl->fwdata; > + int i = 0, len; > + > + if (!skb) { > + while (buf[i] != fw_data->expected_ack && i < count) > + i++; > + if (i == count) > + return ERR_PTR(-EILSEQ); > + > + skb = bt_skb_alloc(MRVL_FW_HDR_LEN, GFP_KERNEL); > + } > + > + if (!skb) > + return ERR_PTR(-ENOMEM); > + > + len = count - i; > + memcpy(skb_put(skb, len), &buf[i], len); > + > + if (skb->len == MRVL_FW_HDR_LEN) { > + mrvl_pkt_complete(hu, skb); > + kfree_skb(skb); > + skb = NULL; > + } > + > + return skb; > +} > + > +/* Receive data */ > +static int mrvl_recv(struct hci_uart *hu, const void *data, int count) > +{ > + struct mrvl_data *mrvl = hu->priv; > + > + if (test_bit(HCI_UART_DNLD_FW, &mrvl->flags)) { > + mrvl->fwdata->skb = mrvl_process_fw_data(hu, mrvl->fwdata->skb, > + (u8 *)data, count); > + if (IS_ERR(mrvl->fwdata->skb)) { > + int err = PTR_ERR(mrvl->fwdata->skb); > + > + bt_dev_err(hu->hdev, > + "Receive firmware data failed (%d)", err); > + mrvl->fwdata->skb = NULL; > + return err; > + } > + return 0; > + } So I really want to get rid of this part in the driver ->recv should be kept compartmentalized between before HCI is ready and when HCI is ready. > + > + if (!test_bit(HCI_UART_REGISTERED, &hu->flags)) > + return -EUNATCH; > + > + mrvl->rx_skb = h4_recv_buf(hu->hdev, mrvl->rx_skb, data, count, > + mrvl_recv_pkts, ARRAY_SIZE(mrvl_recv_pkts)); > + if (IS_ERR(mrvl->rx_skb)) { > + int err = PTR_ERR(mrvl->rx_skb); > + > + bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err); > + mrvl->rx_skb = NULL; > + return err; > + } > + > + return count; > +} > + > +static struct sk_buff *mrvl_dequeue(struct hci_uart *hu) > +{ > + struct mrvl_data *mrvl = hu->priv; > + > + return skb_dequeue(&mrvl->txq); > +} > + > +static int mrvl_init_fw_data(struct hci_uart *hu) > +{ > + struct fw_data *fwdata; > + struct mrvl_data *mrvl = hu->priv; > + > + fwdata = kzalloc(sizeof(*fwdata), GFP_KERNEL); > + if (!fwdata) > + return -ENOMEM; > + > + mrvl->fwdata = fwdata; > + init_waitqueue_head(&fwdata->init_wait_q); > + > + return 0; > +} > + > +/* Wait for the header from device */ > +static int mrvl_wait_for_hdr(struct hci_uart *hu, u8 header) > +{ > + struct mrvl_data *mrvl = hu->priv; > + struct fw_data *fw_data = mrvl->fwdata; > + > + fw_data->expected_ack = header; > + fw_data->wait_fw = 0; > + > + if (!wait_event_interruptible_timeout(fw_data->init_wait_q, > + fw_data->wait_fw, > + MRVL_WAIT_TIMEOUT)) { > + BT_ERR("TIMEOUT, waiting for:0x%x", fw_data->expected_ack); > + return -1; > + } > + > + return 0; > +} > + > +/* Send bytes to device */ > +static int mrvl_send_data(struct hci_uart *hu, struct sk_buff *skb) > +{ > + struct mrvl_data *mrvl = hu->priv; > + > + skb_queue_head(&mrvl->txq, skb); > + hci_uart_tx_wakeup(hu); > + > + if (mrvl_wait_for_hdr(hu, MRVL_HDR_REQ_FW) == -1) > + return -1; > + > + return 0; > +} > + > +/* Download firmware to the device */ > +static int mrvl_dnld_fw(struct hci_uart *hu, const char *file_name) > +{ > + const struct firmware *fw = NULL; > + struct sk_buff *skb = NULL; > + int offset = 0; > + int ret, tx_len; > + struct mrvl_data *mrvl = hu->priv; > + struct fw_data *fw_data = mrvl->fwdata; > + > + ret = request_firmware(&fw, file_name, hu->tty->dev); > + if (ret < 0) { > + BT_ERR("request_firmware() failed"); > + return -1; > + } > + > + BT_INFO("Downloading FW (%d bytes)", (u16)fw->size); > + > + fw_data->last_ack = 0; > + > + do { > + if ((offset >= fw->size) || (fw_data->last_ack)) > + break; > + tx_len = fw_data->next_len; > + if ((fw->size - offset) < tx_len) > + tx_len = fw->size - offset; > + > + skb = bt_skb_alloc(MRVL_MAX_FW_BLOCK_SIZE, GFP_KERNEL); > + if (!skb) { > + ret = -1; > + goto done; > + } > + > + memcpy(skb->data, &fw->data[offset], tx_len); > + skb_put(skb, tx_len); > + if (mrvl_send_data(hu, skb) != 0) { > + BT_ERR("fail to download firmware"); > + ret = -1; > + goto done; > + } > + offset += tx_len; > + } while (1); Use a while(1) { } loop here instead. It is easier on the eyes and has the same semantics. I prefer we only do { } while if you actually have an exit condition. > + > + BT_INFO("downloaded %d byte firmware", offset); > +done: > + release_firmware(fw); > + > + return ret; > +} > + > +/* Set the baud rate */ > +static int mrvl_set_dev_baud(struct hci_uart *hu) > +{ > + struct hci_dev *hdev = hu->hdev; > + struct sk_buff *skb; > + static const u8 baud_param[] = { 0xc0, 0xc6, 0x2d, 0x00 }; > + int err; > + > + skb = __hci_cmd_sync(hdev, MRVL_HCI_OP_SET_BAUD, sizeof(baud_param), > + baud_param, HCI_INIT_TIMEOUT); > + if (IS_ERR(skb)) { > + err = PTR_ERR(skb); > + bt_dev_err(hu->hdev, "Set device baudrate failed (%d)", err); > + return err; > + } > + kfree_skb(skb); > + > + return 0; > +} > + > +/* Reset device */ > +static int mrvl_reset(struct hci_uart *hu) > +{ > + struct hci_dev *hdev = hu->hdev; > + struct sk_buff *skb; > + int err; > + > + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_CMD_TIMEOUT); > + if (IS_ERR(skb)) { > + err = PTR_ERR(skb); > + bt_dev_err(hu->hdev, "Reset device failed (%d)", err); > + return err; > + } > + kfree_skb(skb); > + > + return 0; > +} > + > +static int mrvl_set_baud(struct hci_uart *hu) > +{ > + int err; > + > + hci_uart_set_baudrate(hu, 115200); > + hci_uart_set_flow_control(hu, false); > + > + err = mrvl_reset(hu); > + if (err) > + goto set_term_baud; > + else > + goto set_dev_baud; > + > +set_dev_baud: > + err = mrvl_set_dev_baud(hu); > + if (err) > + return -1; > + > +set_term_baud: Please get rid of the labels here and do a proper if err then return structuring of the function. You are overdoing it with labels and goto here. Also is the mrvl_set_baud function actually used? Looks to me that should be just folded into the ->setup call. > + hci_uart_set_baudrate(hu, 3000000); > + hci_uart_set_flow_control(hu, false); > + > + msleep(MRVL_DNLD_DELAY); > + > + return 0; > +} > + > +static int mrvl_get_fw_name(struct hci_uart *hu, char *fw_name) > +{ > + struct mrvl_data *mrvl = hu->priv; > + struct fw_data *fw_data = mrvl->fwdata; > + > + if (mrvl_wait_for_hdr(hu, MRVL_HDR_CHIP_VER) != 0) { > + BT_ERR("Could not read chip id and revision"); > + return -1; > + } > + > + BT_DBG("chip_id=0x%x, chip_rev=0x%x", > + fw_data->chip_id, fw_data->chip_rev); > + > + switch (fw_data->chip_id) { > + case MRVL_8997_CHIP_ID: > + memcpy(fw_name, MRVL_8997_FW_NAME, sizeof(MRVL_8997_FW_NAME)); > + return 0; > + default: > + BT_ERR("Invalid chip id"); > + return -1; > + } > +} > + > +/* Download helper and firmare to device */ > +static int hci_uart_dnld_fw(struct hci_uart *hu) > +{ > + struct tty_struct *tty = hu->tty; > + struct ktermios new_termios; > + struct ktermios old_termios; > + struct mrvl_data *mrvl = hu->priv; > + char fw_name[128]; > + int ret; > + > + old_termios = tty->termios; > + > + if (get_cts(hu)) { > + BT_INFO("fw is running"); > + clear_bit(HCI_UART_DNLD_FW, &mrvl->flags); > + return 0; > + } > + > + hci_uart_set_baudrate(hu, 115200); > + hci_uart_set_flow_control(hu, true); > + > + ret = mrvl_wait_for_hdr(hu, MRVL_HDR_REQ_FW); > + if (ret) > + goto fail; > + > + ret = mrvl_dnld_fw(hu, MRVL_HELPER_NAME); > + if (ret) > + goto fail; > + > + msleep(MRVL_DNLD_DELAY); > + > + hci_uart_set_baudrate(hu, 3000000); > + hci_uart_set_flow_control(hu, false); > + > + ret = mrvl_get_fw_name(hu, fw_name); > + if (ret) > + goto fail; > + > + ret = mrvl_wait_for_hdr(hu, MRVL_HDR_REQ_FW); > + if (ret) > + goto fail; > + > + ret = mrvl_dnld_fw(hu, fw_name); > + if (ret) > + goto fail; > + > + msleep(MRVL_DNLD_DELAY); > +fail: > + /* restore uart settings */ > + new_termios = tty->termios; > + tty->termios.c_cflag = old_termios.c_cflag; > + tty_set_termios(tty, &new_termios); > + clear_bit(HCI_UART_DNLD_FW, &mrvl->flags); > + > + return ret; > +} > + > +static int mrvl_setup(struct hci_uart *hu) > +{ > + return mrvl_set_baud(hu); > +} > + > +static int mrvl_prepare(struct hci_uart *hu) > +{ > + struct mrvl_data *mrvl = hu->priv; > + > + mrvl_init_fw_data(hu); > + set_bit(HCI_UART_DNLD_FW, &mrvl->flags); > + > + return hci_uart_dnld_fw(hu); > +} > + > +static const struct hci_uart_proto mrvlp = { > + .id = HCI_UART_MRVL, > + .name = "MRVL", > + .open = mrvl_open, > + .close = mrvl_close, > + .recv = mrvl_recv, > + .enqueue = mrvl_enqueue, > + .dequeue = mrvl_dequeue, > + .flush = mrvl_flush, > + .setup = mrvl_setup, > + .prepare = mrvl_prepare, > +}; > + > +int __init mrvl_init(void) > +{ > + return hci_uart_register_proto(&mrvlp); > +} > + > +int __exit mrvl_deinit(void) > +{ > + return hci_uart_unregister_proto(&mrvlp); > +} > diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h > index ad4d66b..57d3356 100644 > --- a/drivers/bluetooth/hci_uart.h > +++ b/drivers/bluetooth/hci_uart.h > @@ -35,7 +35,7 @@ > #define HCIUARTGETFLAGS _IOR('U', 204, int) > > /* UART protocols */ > -#define HCI_UART_MAX_PROTO 10 > +#define HCI_UART_MAX_PROTO 11 > > #define HCI_UART_H4 0 > #define HCI_UART_BCSP 1 > @@ -47,6 +47,7 @@ > #define HCI_UART_BCM 7 > #define HCI_UART_QCA 8 > #define HCI_UART_AG6XX 9 > +#define HCI_UART_MRVL 10 > > #define HCI_UART_RAW_DEVICE 0 > #define HCI_UART_RESET_ON_INIT 1 > @@ -190,3 +191,8 @@ int qca_deinit(void); > int ag6xx_init(void); > int ag6xx_deinit(void); > #endif > + > +#ifdef CONFIG_BT_HCIUART_MRVL > +int mrvl_init(void); > +int mrvl_deinit(void); > +#endif Regards Marcel -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
