Hi,
Basically cannot see any beacons when performing hcitool lescan.
hciconfig:-
hci0: Type: BR/EDR Bus: UART
BD Address: 78:A5:04:25:57:51 ACL MTU: 1021:6 SCO MTU: 180:4
UP RUNNING
RX bytes:1216 acl:0 sco:0 events:47 errors:0
TX bytes:502 acl:0 sco:0 commands:47 errors:0
Rfkill list
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
systemctl|grep Bluetooth:-
sys-devices-virtual-bluetooth-hci0-rfkill0.device loaded active plugged /sys/devices/virtual/bluetooth/hci0/rfkill0
sys-devices-virtual-bluetooth-hci0.device loaded active plugged /sys/devices/virtual/bluetooth/hci0
sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
bluetooth.service loaded active running Bluetooth service
bluetooth.target loaded active active Bluetooth
However bluetoothctl just shows 'No default controller available'.
Using Jessie 8.4 over 2 kernels, 3.14.48 & 4.3.4. The 3.14.48 kernel is known to work, but for various reasons cannot be updated at present.
Stu
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
