Hi Marcel, > From: Marcel Holtmann [mailto:marcel@xxxxxxxxxxxx] > Sent: Friday, April 08, 2016 10:40 PM > To: Amitkumar Karwar > Cc: linux-bluetooth@xxxxxxxxxxxxxxx; Nishant Sarmukadam; > wnhuang@xxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux- > kernel@xxxxxxxxxxxxxxx; Xinming Hu > Subject: Re: [PATCH v6 2/2] btmrvl: add platform specific wakeup > interrupt support > > Hi Amitkumar, > > > On some arm-based platforms, we need to configure platform specific > > parameters by device tree node and we need define our node as a child > > node of parent SDIO host controller. > > This patch parses these parameters from device tree. It includes > > calibration data download to firmware, wakeup pin configured to > > firmware, and soc specific wakeup interrupt pin. > > > > Signed-off-by: Xinming Hu <huxm@xxxxxxxxxxx> > > Signed-off-by: Amitkumar Karwar <akarwar@xxxxxxxxxxx> > > --- > > drivers/bluetooth/btmrvl_drv.h | 11 ++++++ > > drivers/bluetooth/btmrvl_main.c | 33 +++++++++-------- > > drivers/bluetooth/btmrvl_sdio.c | 79 > > +++++++++++++++++++++++++++++++++++++++++ > > drivers/bluetooth/btmrvl_sdio.h | 6 ++++ > > 4 files changed, 115 insertions(+), 14 deletions(-) > > > > diff --git a/drivers/bluetooth/btmrvl_drv.h > > b/drivers/bluetooth/btmrvl_drv.h index 0590473..f742384 100644 > > --- a/drivers/bluetooth/btmrvl_drv.h > > +++ b/drivers/bluetooth/btmrvl_drv.h > > @@ -23,6 +23,17 @@ > > #include <linux/bitops.h> > > #include <linux/slab.h> > > #include <net/bluetooth/bluetooth.h> > > +#include <linux/err.h> > > +#include <linux/gpio.h> > > +#include <linux/gfp.h> > > +#include <linux/interrupt.h> > > +#include <linux/io.h> > > +#include <linux/of_gpio.h> > > +#include <linux/of_platform.h> > > +#include <linux/platform_device.h> > > +#include <linux/pm_runtime.h> > > +#include <linux/slab.h> > > +#include <linux/of_irq.h> > > > > #define BTM_HEADER_LEN 4 > > #define BTM_UPLD_SIZE 2312 > > diff --git a/drivers/bluetooth/btmrvl_main.c > > b/drivers/bluetooth/btmrvl_main.c index f25a825..25343ef 100644 > > --- a/drivers/bluetooth/btmrvl_main.c > > +++ b/drivers/bluetooth/btmrvl_main.c > > @@ -510,34 +510,39 @@ static int btmrvl_download_cal_data(struct > > btmrvl_private *priv, static int btmrvl_check_device_tree(struct > > btmrvl_private *priv) { > > struct device_node *dt_node; > > + struct btmrvl_sdio_card *card = priv->btmrvl_dev.card; > > u8 cal_data[BT_CAL_HDR_LEN + BT_CAL_DATA_SIZE]; > > - int ret; > > - u32 val; > > + int ret = 0; > > + u16 gpio, gap; > > + > > + if (card->plt_of_node) { > > + dt_node = card->plt_of_node; > > + ret = of_property_read_u16(dt_node, "btmrvl,wakeup-pin", > > + &gpio); > > + if (ret) > > + gpio = (priv->btmrvl_dev.gpio_gap & 0xff00) >> 8; > > + > > + ret = of_property_read_u16(dt_node, "btmrvl,wakeup-gap", > > + &gap); > > + if (ret) > > + gap = (u8)(priv->btmrvl_dev.gpio_gap & 0x00ff); > > > > - for_each_compatible_node(dt_node, NULL, "btmrvl,cfgdata") { > > - ret = of_property_read_u32(dt_node, "btmrvl,gpio-gap", > &val); > > - if (!ret) > > - priv->btmrvl_dev.gpio_gap = val; > > + priv->btmrvl_dev.gpio_gap = (gpio << 8) + gap; > > > > ret = of_property_read_u8_array(dt_node, "btmrvl,cal-data", > > cal_data + BT_CAL_HDR_LEN, > > BT_CAL_DATA_SIZE); > > - if (ret) { > > - of_node_put(dt_node); > > + if (ret) > > return ret; > > - } > > > > BT_DBG("Use cal data from device tree"); > > ret = btmrvl_download_cal_data(priv, cal_data, > > BT_CAL_DATA_SIZE); > > - if (ret) { > > + if (ret) > > BT_ERR("Fail to download calibrate data"); > > - of_node_put(dt_node); > > - return ret; > > - } > > } > > > > - return 0; > > + return ret; > > } > > > > static int btmrvl_setup(struct hci_dev *hdev) diff --git > > a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c > > index 6ed8acf..c714040 100644 > > --- a/drivers/bluetooth/btmrvl_sdio.c > > +++ b/drivers/bluetooth/btmrvl_sdio.c > > @@ -52,6 +52,68 @@ static struct memory_type_mapping > mem_type_mapping_tbl[] = { > > {"EXTLAST", NULL, 0, 0xFE}, > > }; > > > > +static const struct of_device_id btmrvl_sdio_of_match_table[] = { > > + { .compatible = "marvell,sd8897-bt" }, > > + { .compatible = "marvell,sd8997-bt" }, > > + { } > > +}; > > is this agreed upon by the DT maintainer? I only want to merge this > patch if we have agreement. > Please hold on for this patch. Rob Herring had suggested to use Linux kernel's generic wake irq handling. We found out it's not suitable for us. We will discuss it with Rob. Regards, Amitkumar -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
