On Tue, Feb 16, 2016 at 01:55:54AM -0800, Amitkumar Karwar wrote:
> From: Xinming Hu <huxm@xxxxxxxxxxx>
>
> Platform device and driver provide easy way to
> interact with device-tree-enabled system.
>
> This patch registers platform driver and reorganise
> existing device tree specific code.
>
> Signed-off-by: Xinming Hu <huxm@xxxxxxxxxxx>
> Signed-off-by: Amitkumar Karwar <akarwar@xxxxxxxxxxx>
> ---
> v3: Add NULL check for 'btmrvl_plt_dev'
> v4: Moved the bindings file to bindings/net/
> Corrected the name of 'name' and 'compatible' properties(Rob Herring)
> ---
> Documentation/devicetree/bindings/btmrvl.txt | 29 -----------
> .../devicetree/bindings/net/marvell-bt-sd8xxx.txt | 29 +++++++++++
> drivers/bluetooth/Makefile | 1 +
> drivers/bluetooth/btmrvl_drv.h | 16 ++++++
> drivers/bluetooth/btmrvl_main.c | 8 ++-
> drivers/bluetooth/btmrvl_platform.c | 60 ++++++++++++++++++++++
> 6 files changed, 113 insertions(+), 30 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/btmrvl.txt
> create mode 100644 Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt
> create mode 100644 drivers/bluetooth/btmrvl_platform.c
>
> diff --git a/Documentation/devicetree/bindings/btmrvl.txt b/Documentation/devicetree/bindings/btmrvl.txt
> deleted file mode 100644
> index 58f964b..0000000
> --- a/Documentation/devicetree/bindings/btmrvl.txt
> +++ /dev/null
> @@ -1,29 +0,0 @@
> -btmrvl
> -------
> -
> -Required properties:
> -
> - - compatible : must be "btmrvl,cfgdata"
> -
> -Optional properties:
> -
> - - btmrvl,cal-data : Calibration data downloaded to the device during
> - initialization. This is an array of 28 values(u8).
> -
> - - btmrvl,gpio-gap : gpio and gap (in msecs) combination to be
> - configured.
> -
> -Example:
> -
> -GPIO pin 13 is configured as a wakeup source and GAP is set to 100 msecs
> -in below example.
> -
> -btmrvl {
> - compatible = "btmrvl,cfgdata";
> -
> - btmrvl,cal-data = /bits/ 8 <
> - 0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
> - 0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
> - 0x00 0x00 0xf0 0x00>;
> - btmrvl,gpio-gap = <0x0d64>;
> -};
> diff --git a/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt
> new file mode 100644
> index 0000000..516b636
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt
> @@ -0,0 +1,29 @@
> +Marvell bluetooth sdio driver
> +------
> +
> +Required properties:
> +
> + - compatible : must be "marvell,bt-sd8xxx"
List specific models, not wildcards.
> +
> +Optional properties:
> +
> + - btmrvl,cal-data : Calibration data downloaded to the device during
> + initialization. This is an array of 28 values(u8).
> +
> + - btmrvl,gpio-gap : gpio and gap (in msecs) combination to be
> + configured.
This needs a better explanation.
> +
> +Example:
> +
> +GPIO pin 13 and gap 100ms are configured for host wakeup, calibration
> +data is also available in below example.
> +
> +bluetooth {
This needs to follow the SDIO bus binding and be a child node of the
SDIO controller.
> + compatible = "marvell,bt-sd8xxx";
> +
> + btmrvl,cal-data = /bits/ 8 <
> + 0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
> + 0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
> + 0x00 0x00 0xf0 0x00>;
> + btmrvl,gpio-gap = <0x0d64>;
> +};
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
