It is all... that's why I'm surprised too. Where do you see bluetoothd logs? On Mon, Feb 15, 2016 at 10:19 AM, Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx> wrote: > Hi François, > > On Fri, Feb 12, 2016 at 3:38 PM, François Beaufort > <beaufort.francois@xxxxxxxxx> wrote: >> Hello! I use BlueZ 5.35 and I'd love your help. >> Can you help me understand why list-attributes doesn't return anything >> and the "GattServices is nil" message? >> >> Here's my bluetoothctl logs: >> >> [bluetooth]# connect F1:6F:DE:EC:F1:D6 >> Attempting to connect to F1:6F:DE:EC:F1:D6 >> [CHG] Device F1:6F:DE:EC:F1:D6 Connected: yes >> Connection successful >> [CHG] Device F1:6F:DE:EC:F1:D6 GattServices is nil >> [DFU_Test]# list-attributes >> [DFU_Test]# info >> Device F1:6F:DE:EC:F1:D6 >> Name: DFU_Test >> Alias: DFU_Test >> Appearance: 0x0340 >> Paired: no >> Trusted: no >> Blocked: no >> Connected: yes >> LegacyPairing: no >> UUID: Heart Rate (0000180d-0000-1000-8000-00805f9b34fb) >> UUID: Device Information (0000180a-0000-1000-8000-00805f9b34fb) >> >> And here are my btmon logs in case it would help: >> >> < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 [hci0] 49.518076 >> Type: Passive (0x00) >> Interval: 60.000 msec (0x0060) >> Window: 30.000 msec (0x0030) >> Own address type: Public (0x00) >> Filter policy: Ignore not in white list (0x01) >>> HCI Event: Command Complete (0x0e) plen 4 [hci0] 49.518952 >> LE Set Scan Parameters (0x08|0x000b) ncmd 1 >> Status: Success (0x00) >> < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 [hci0] 49.518981 >> Scanning: Enabled (0x01) >> Filter duplicates: Enabled (0x01) >>> HCI Event: Command Complete (0x0e) plen 4 [hci0] 49.519952 >> LE Set Scan Enable (0x08|0x000c) ncmd 1 >> Status: Success (0x00) >>> HCI Event: LE Meta Event (0x3e) plen 36 [hci0] 52.188030 >> LE Advertising Report (0x02) >> Num reports: 1 >> Event type: Connectable undirected - ADV_IND (0x00) >> Address type: Random (0x01) >> Address: F1:6F:DE:EC:F1:D6 (Static) >> Data length: 24 >> Flags: 0x06 >> LE General Discoverable Mode >> BR/EDR Not Supported >> 16-bit Service UUIDs (complete): 2 entries >> Heart Rate (0x180d) >> Device Information (0x180a) >> Appearance: Heart Rate Sensor (0x0340) >> Name (complete): DFU_Test >> RSSI: -31 dBm (0xe1) >> < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 [hci0] 52.188143 >> Scanning: Disabled (0x00) >> Filter duplicates: Disabled (0x00) >>> HCI Event: Command Complete (0x0e) plen 4 [hci0] 52.188957 >> LE Set Scan Enable (0x08|0x000c) ncmd 1 >> Status: Success (0x00) >> < HCI Command: LE Create Connection (0x08|0x000d) plen 25 [hci0] 52.189058 >> Scan interval: 60.000 msec (0x0060) >> Scan window: 30.000 msec (0x0030) >> Filter policy: White list is not used (0x00) >> Peer address type: Random (0x01) >> Peer address: F1:6F:DE:EC:F1:D6 (Static) >> Own address type: Public (0x00) >> Min connection interval: 50.00 msec (0x0028) >> Max connection interval: 70.00 msec (0x0038) >> Connection latency: 0x0000 >> Supervision timeout: 420 msec (0x002a) >> Min connection length: 0.000 msec (0x0000) >> Max connection length: 0.000 msec (0x0000) >>> HCI Event: Command Status (0x0f) plen 4 [hci0] 52.189955 >> LE Create Connection (0x08|0x000d) ncmd 1 >> Status: Success (0x00) >> < HCI Command: LE Create Connection Can.. (0x08|0x000e) plen 0 [hci0] 54.195731 >>> HCI Event: LE Meta Event (0x3e) plen 19 [hci0] 54.195946 >> LE Connection Complete (0x01) >> Status: Success (0x00) >> Handle: 32 >> Role: Master (0x00) >> Peer address type: Random (0x01) >> Peer address: F1:6F:DE:EC:F1:D6 (Static) >> Connection interval: 67.50 msec (0x0036) >> Connection latency: 0.00 msec (0x0000) >> Supervision timeout: 420 msec (0x002a) >> Master clock accuracy: 0x00 >> @ Device Connected: F1:6F:DE:EC:F1:D6 (2) flags 0x0000 >> 02 01 06 05 03 0d 18 0a 18 03 19 40 03 0a 09 44 ...........@...D >> 46 55 5f 54 65 73 74 00 FU_Test. >>> HCI Event: Command Complete (0x0e) plen 4 [hci0] 54.196928 >> LE Create Connection Cancel (0x08|0x000e) ncmd 1 >> Status: Command Disallowed (0x0c) >> < HCI Command: LE Read Remote Used Feat.. (0x08|0x0016) plen 2 [hci0] 54.197004 >> Handle: 32 >>> HCI Event: Command Status (0x0f) plen 4 [hci0] 54.197929 >> LE Read Remote Used Features (0x08|0x0016) ncmd 1 >> Status: Success (0x00) >>> HCI Event: LE Meta Event (0x3e) plen 12 [hci0] 54.330960 >> LE Read Remote Used Features (0x04) >> Status: Success (0x00) >> Handle: 32 >> Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 >> LE Encryption >> < ACL Data TX: Handle 32 flags 0x00 dlen 7 [hci0] 54.332123 >> ATT: Exchange MTU Request (0x02) len 2 >> Client RX MTU: 517 >>> HCI Event: Number of Completed Packets (0x13) plen 5 [hci0] 54.397976 >> Num handles: 1 >> Handle: 32 >> Count: 1 >>> ACL Data RX: Handle 32 flags 0x02 dlen 7 [hci0] 54.465099 >> ATT: Exchange MTU Response (0x03) len 2 >> Server RX MTU: 23 >> < ACL Data TX: Handle 32 flags 0x00 dlen 11 [hci0] 54.465342 >> ATT: Read By Group Type Request (0x10) len 6 >> Handle range: 0x0001-0xffff >> Attribute group type: Primary Service (0x2800) >>> HCI Event: Number of Completed Packets (0x13) plen 5 [hci0] 54.532926 >> Num handles: 1 >> Handle: 32 >> Count: 1 >>> ACL Data RX: Handle 32 flags 0x02 dlen 18 [hci0] 54.600225 >> ATT: Read By Group Type Response (0x11) len 13 >> Attribute data length: 6 >> Attribute group list: 2 entries >> Handle range: 0x0001-0x0007 >> UUID: Generic Access Profile (0x1800) >> Handle range: 0x0008-0x000b >> UUID: Generic Attribute Profile (0x1801) >> < ACL Data TX: Handle 32 flags 0x00 dlen 11 [hci0] 54.600402 >> ATT: Read By Group Type Request (0x10) len 6 >> Handle range: 0x000c-0xffff >> Attribute group type: Primary Service (0x2800) >>> HCI Event: Number of Completed Packets (0x13) plen 5 [hci0] 54.667973 >> Num handles: 1 >> Handle: 32 >> Count: 1 >>> ACL Data RX: Handle 32 flags 0x02 dlen 26 [hci0] 54.735207 >> ATT: Read By Group Type Response (0x11) len 21 >> Attribute data length: 20 >> Attribute group list: 1 entry >> Handle range: 0x000c-0x0011 >> UUID: Unknown (00001530-1212-efde-1523-785feabcd123) >> < ACL Data TX: Handle 32 flags 0x00 dlen 11 [hci0] 54.735408 >> ATT: Read By Group Type Request (0x10) len 6 >> Handle range: 0x0012-0xffff >> Attribute group type: Primary Service (0x2800) >>> HCI Event: Number of Completed Packets (0x13) plen 5 [hci0] 54.802940 >> Num handles: 1 >> Handle: 32 >> Count: 1 >>> ACL Data RX: Handle 32 flags 0x02 dlen 18 [hci0] 54.937705 >> ATT: Read By Group Type Response (0x11) len 13 >> Attribute data length: 6 >> Attribute group list: 2 entries >> Handle range: 0x0012-0x0019 >> UUID: Heart Rate (0x180d) >> Handle range: 0x001a-0xffff >> UUID: Device Information (0x180a) >> < ACL Data TX: Handle 32 flags 0x00 dlen 11 [hci0] 54.937991 >> ATT: Read By Group Type Request (0x10) len 6 >> Handle range: 0x0001-0xffff >> Attribute group type: Secondary Service (0x2801) >>> HCI Event: Number of Completed Packets (0x13) plen 5 [hci0] 55.005936 >> Num handles: 1 >> Handle: 32 >> Count: 1 >>> ACL Data RX: Handle 32 flags 0x02 dlen 9 [hci0] 55.072581 >> ATT: Error Response (0x01) len 4 >> Read By Group Type Request (0x10) >> Handle: 0x0001 >> Error: Attribute Not Found (0x0a) >> < ACL Data TX: Handle 32 flags 0x00 dlen 11 [hci0] 55.072850 >> ATT: Read By Type Request (0x08) len 6 >> Handle range: 0x0008-0x000b >> Attribute type: Include (0x2802) >>> HCI Event: Number of Completed Packets (0x13) plen 5 [hci0] 55.140972 >> Num handles: 1 >> Handle: 32 >> Count: 1 >>> ACL Data RX: Handle 32 flags 0x02 dlen 9 [hci0] 55.207582 >> ATT: Error Response (0x01) len 4 >> Read By Type Request (0x08) >> Handle: 0x0008 >> Error: Attribute Not Found (0x0a) >> < ACL Data TX: Handle 32 flags 0x00 dlen 11 [hci0] 55.207940 >> ATT: Read By Type Request (0x08) len 6 >> Handle range: 0x000c-0x0011 >> Attribute type: Include (0x2802) >>> HCI Event: Number of Completed Packets (0x13) plen 5 [hci0] 55.275954 >> Num handles: 1 >> Handle: 32 >> Count: 1 >>> ACL Data RX: Handle 32 flags 0x02 dlen 9 [hci0] 55.342564 >> ATT: Error Response (0x01) len 4 >> Read By Type Request (0x08) >> Handle: 0x000c >> Error: Attribute Not Found (0x0a) >> < ACL Data TX: Handle 32 flags 0x00 dlen 11 [hci0] 55.342855 >> ATT: Read By Type Request (0x08) len 6 >> Handle range: 0x0012-0x0019 >> Attribute type: Include (0x2802) >>> HCI Event: Number of Completed Packets (0x13) plen 5 [hci0] 55.410939 >> Num handles: 1 >> Handle: 32 >> Count: 1 >>> ACL Data RX: Handle 32 flags 0x02 dlen 9 [hci0] 55.477547 >> ATT: Error Response (0x01) len 4 >> Read By Type Request (0x08) >> Handle: 0x0012 >> Error: Attribute Not Found (0x0a) >> < ACL Data TX: Handle 32 flags 0x00 dlen 11 [hci0] 55.477794 >> ATT: Read By Type Request (0x08) len 6 >> Handle range: 0x001a-0xffff >> Attribute type: Include (0x2802) >>> HCI Event: Number of Completed Packets (0x13) plen 5 [hci0] 55.545967 >> Num handles: 1 >> Handle: 32 >> Count: 1 >>> ACL Data RX: Handle 32 flags 0x02 dlen 9 [hci0] 55.612685 >> ATT: Error Response (0x01) len 4 >> Read By Type Request (0x08) >> Handle: 0x001a >> Error: Attribute Not Found (0x0a) >> < ACL Data TX: Handle 32 flags 0x00 dlen 11 [hci0] 55.612878 >> ATT: Read By Type Request (0x08) len 6 >> Handle range: 0x0008-0x000b >> Attribute type: Characteristic (0x2803) >>> HCI Event: Number of Completed Packets (0x13) plen 5 [hci0] 55.680951 >> Num handles: 1 >> Handle: 32 >> Count: 1 >>> ACL Data RX: Handle 32 flags 0x02 dlen 13 [hci0] 55.747715 >> ATT: Read By Type Response (0x09) len 8 >> Attribute data length: 7 >> Attribute data list: 1 entry >> Handle: 0x0009 >> Value: 200a00052a >> < ACL Data TX: Handle 32 flags 0x00 dlen 11 [hci0] 55.747892 >> ATT: Read By Type Request (0x08) len 6 >> Handle range: 0x000a-0x000b >> Attribute type: Characteristic (0x2803) >>> HCI Event: Number of Completed Packets (0x13) plen 5 [hci0] 55.815954 >> Num handles: 1 >> Handle: 32 >> Count: 1 >>> ACL Data RX: Handle 32 flags 0x02 dlen 9 [hci0] 55.882715 >> ATT: Error Response (0x01) len 4 >> Read By Type Request (0x08) >> Handle: 0x000a >> Error: Attribute Not Found (0x0a) >> -- > > Was this all? Check if there is any error in bluetoothd logs since it > appears to have stopped while discovering the characteristics of a GAP > service. > > -- > Luiz Augusto von Dentz -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
