Hi Marcel, > -----Original Message----- > From: Marcel Holtmann [mailto:marcel@xxxxxxxxxxxx] > Sent: Friday, January 29, 2016 4:50 PM > To: Amitkumar Karwar > Cc: linux-bluetooth@xxxxxxxxxxxxxxx; Cathy Luo; Nishant Sarmukadam; > Ganapathi Bhat > Subject: Re: [PATCH] hciattach: Add support for Marvell Bluetooth device > > Hi Amitkumar, > > > This patch enables the Marvell Bluetooth device (UART sku) over the H4 > > protocol. It configures the baudrate and download firmware to bring up > > the device. > > > > Command syntax: hciattach /dev/ttyUSB0 marvell > > > > Make sure to place the marvell_hci_uart.conf file in > > /lib/firmware/mrvl/ > > > > This file should contain below info: > > HELPER_FILE_PATH=<full path of helper binary> FIRMWARE_FILE_PATH=<full > > path of firmware binary> FIRMWARE_DOWNLOAD_BAUD_RATE=<firmware > > download baud rate> > > Thanks for your review comments. We have decided to push firmware download support in hci_uart driver first. We will address your comments and come up with V2 patch later. Regards, Amitkumar Karwar -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
