Re: [PATCH v2] drivers/net/ieee802154/adf7242: Driver for ADF7242 MAC IEEE802154

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello.

On 08/12/15 12:52, michael.hennerich@xxxxxxxxxx wrote:
From: Michael Hennerich <michael.hennerich@xxxxxxxxxx>

This driver has been sitting in the linux-zigbee[2] repository for a long
time. We updated it from time to time and made it available via our
github kernel repository. The Linux MAC802.15.4 support has improved a lot
since then. Thanks to all! So it’s finally time to upstream this driver.

The ADF7242 requires an add-on firmware for the automatic IEEE 802.15.4
operating modes. The firmware file is currently made available on the
ADF7242 wiki page here [1]

[1] http://wiki.analog.com/resources/tools-software/linux-drivers/networking-mac802154/adf7242
[2] http://sourceforge.net/p/linux-zigbee/kernel/ci/devel/tree/drivers/ieee802154/adf7242.c

Changes since v1:
	-Add link to the product page/datasheet.
	-Add missing includes.
	-Use defines for magic PA bias values.
	-Unify wait_ready and wait_status functions.
	-Add RC_BUSY error handling using soft reset.
	 Requires some extra cached parameters.
	-Enable adf7242_verify_firmware() only during DEBUG.
	-Fixed some compiler warnings.
	-Removed sysfs status attribute.
	-Added debugfs status file.
	-Enable/Disable IRQ in start/stop.
	-Added missing MAINTAINER entry.
	-Added missing Kconfig help text.

Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
---
  .../devicetree/bindings/net/ieee802154/adf7242.txt |   18 +
  MAINTAINERS                                        |    9 +
  drivers/net/ieee802154/Kconfig                     |   11 +
  drivers/net/ieee802154/Makefile                    |    1 +
  drivers/net/ieee802154/adf7242.c                   | 1251 ++++++++++++++++++++
  5 files changed, 1290 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/net/ieee802154/adf7242.txt
  create mode 100644 drivers/net/ieee802154/adf7242.c

diff --git a/Documentation/devicetree/bindings/net/ieee802154/adf7242.txt b/Documentation/devicetree/bindings/net/ieee802154/adf7242.txt
new file mode 100644
index 0000000..dea5124
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ieee802154/adf7242.txt
@@ -0,0 +1,18 @@
+* ADF7242 IEEE 802.15.4 *
+
+Required properties:
+  - compatible:		should be "adi,adf7242"
+  - spi-max-frequency:	maximal bus speed (12.5 MHz)
+  - reg:		the chipselect index
+  - interrupts:		the interrupt generated by the device via pin IRQ1.
+			IRQ_TYPE_LEVEL_HIGH (4) or IRQ_TYPE_EDGE_FALLING (1)
+
+Example:
+
+	adf7242@0 {
+		compatible = "adi,adf7242";
+		spi-max-frequency = <10000000>;
+		reg = <0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gpio3>;
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index ea17512..240ab8b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -371,6 +371,15 @@ ADDRESS SPACE LAYOUT RANDOMIZATION (ASLR)
  M:	Jiri Kosina <jikos@xxxxxxxxxx>
  S:	Maintained

+ADF7242 IEEE 802.15.4 RADIO DRIVER
+M:	Michael Hennerich <michael.hennerich@xxxxxxxxxx>
+W:	https://wiki.analog.com/ADF7242
+W:	http://ez.analog.com/community/linux-device-drivers
+L:	linux-wpan@xxxxxxxxxxxxxxx
+S:	Supported
+F:	drivers/net/ieee802154/adf7242.c
+F:	Documentation/devicetree/bindings/net/ieee802154/adf7242.txt
+
  ADM1025 HARDWARE MONITOR DRIVER
  M:	Jean Delvare <jdelvare@xxxxxxxx>
  L:	lm-sensors@xxxxxxxxxxxxxx
diff --git a/drivers/net/ieee802154/Kconfig b/drivers/net/ieee802154/Kconfig
index ce5f1a2..3057a8d 100644
--- a/drivers/net/ieee802154/Kconfig
+++ b/drivers/net/ieee802154/Kconfig
@@ -71,3 +71,14 @@ config IEEE802154_ATUSB

  	  This driver can also be built as a module. To do so say M here.
  	  The module will be called 'atusb'.
+
+config IEEE802154_ADF7242
+       tristate "ADF7242 transceiver driver"
+       depends on IEEE802154_DRIVERS && MAC802154
+       depends on SPI
+	---help---
+	  Say Y here to enable the ADF7242 SPI 802.15.4 wireless
+	  controller.
+
+	  This driver can also be built as a module. To do so, say M here.
+	  the module will be called 'adf7242'.
diff --git a/drivers/net/ieee802154/Makefile b/drivers/net/ieee802154/Makefile
index cf1d2a6..3a923d3 100644
--- a/drivers/net/ieee802154/Makefile
+++ b/drivers/net/ieee802154/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_IEEE802154_AT86RF230) += at86rf230.o
  obj-$(CONFIG_IEEE802154_MRF24J40) += mrf24j40.o
  obj-$(CONFIG_IEEE802154_CC2520) += cc2520.o
  obj-$(CONFIG_IEEE802154_ATUSB) += atusb.o
+obj-$(CONFIG_IEEE802154_ADF7242) += adf7242.o
diff --git a/drivers/net/ieee802154/adf7242.c b/drivers/net/ieee802154/adf7242.c
new file mode 100644
index 0000000..cdbc5ef
--- /dev/null
+++ b/drivers/net/ieee802154/adf7242.c
@@ -0,0 +1,1251 @@
+/*
+ * Analog Devices ADF7242 Low-Power IEEE 802.15.4 Transceiver
+ *
+ * Copyright 2009-2015 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ * http://www.analog.com/ADF7242
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/spinlock.h>
+#include <linux/firmware.h>
+#include <linux/spi/spi.h>
+#include <linux/skbuff.h>
+#include <linux/of.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/debugfs.h>
+#include <linux/ieee802154.h>
+#include <net/mac802154.h>
+#include <net/cfg802154.h>
+
+#define FIRMWARE "adf7242_firmware.bin"
+#define MAX_POLL_LOOPS 200

You increased the MAX_POLL_LOOPS to 200 from 50 here since the last version. Any reason for it?
+
+/* All Registers */
+
+#define REG_EXT_CTRL	0x100	/* RW External LNA/PA and internal PA control */
+#define REG_TX_FSK_TEST 0x101	/* RW TX FSK test mode configuration */
+#define REG_CCA1	0x105	/* RW RSSI threshold for CCA */
+#define REG_CCA2	0x106	/* RW CCA mode configuration */
+#define REG_BUFFERCFG	0x107	/* RW RX_BUFFER overwrite control */
+#define REG_PKT_CFG	0x108	/* RW FCS evaluation configuration */
+#define REG_DELAYCFG0	0x109	/* RW RC_RX command to SFD or sync word delay */
+#define REG_DELAYCFG1	0x10A	/* RW RC_TX command to TX state */
+#define REG_DELAYCFG2	0x10B	/* RW Mac delay extension */
+#define REG_SYNC_WORD0	0x10C	/* RW sync word bits [7:0] of [23:0]  */
+#define REG_SYNC_WORD1	0x10D	/* RW sync word bits [15:8] of [23:0]  */
+#define REG_SYNC_WORD2	0x10E	/* RW sync word bits [23:16] of [23:0]	*/
+#define REG_SYNC_CONFIG	0x10F	/* RW sync word configuration */
+#define REG_RC_CFG	0x13E	/* RW RX / TX packet configuration */
+#define REG_RC_VAR44	0x13F	/* RW RESERVED */
+#define REG_CH_FREQ0	0x300	/* RW Channel Frequency Settings - Low */
+#define REG_CH_FREQ1	0x301	/* RW Channel Frequency Settings - Middle */
+#define REG_CH_FREQ2	0x302	/* RW Channel Frequency Settings - High */
+#define REG_TX_FD	0x304	/* RW TX Frequency Deviation Register */
+#define REG_DM_CFG0	0x305	/* RW RX Discriminator BW Register */
+#define REG_TX_M	0x306	/* RW TX Mode Register */
+#define REG_RX_M	0x307	/* RW RX Mode Register */
+#define REG_RRB		0x30C	/* R RSSI Readback Register */
+#define REG_LRB		0x30D	/* R Link Quality Readback Register */
+#define REG_DR0		0x30E	/* RW bits [15:8] of [15:0] data rate setting */
+#define REG_DR1		0x30F	/* RW bits [7:0] of [15:0] data rate setting */
+#define REG_PRAMPG	0x313	/* RW RESERVED */
+#define REG_TXPB	0x314	/* RW TX Packet Storage Base Address */
+#define REG_RXPB	0x315	/* RW RX Packet Storage Base Address */
+#define REG_TMR_CFG0	0x316	/* RW Wake up Timer Conf Register - High */
+#define REG_TMR_CFG1	0x317	/* RW Wake up Timer Conf Register - Low */
+#define REG_TMR_RLD0	0x318	/* RW Wake up Timer Value Register - High */
+#define REG_TMR_RLD1	0x319	/* RW Wake up Timer Value Register - Low  */
+#define REG_TMR_CTRL	0x31A	/* RW Wake up Timer Timeout flag */
+#define REG_PD_AUX	0x31E	/* RW Battmon enable */
+#define REG_GP_CFG	0x32C	/* RW GPIO Configuration */
+#define REG_GP_OUT	0x32D	/* RW GPIO Configuration */
+#define REG_GP_IN	0x32E	/* R GPIO Configuration */
+#define REG_SYNT	0x335	/* RW bandwidth calibration timers */
+#define REG_CAL_CFG	0x33D	/* RW Calibration Settings */
+#define REG_PA_BIAS	0x36E	/* RW PA BIAS */
+#define REG_SYNT_CAL	0x371	/* RW Oscillator and Doubler Configuration */
+#define REG_IIRF_CFG	0x389	/* RW BB Filter Decimation Rate */
+#define REG_CDR_CFG	0x38A	/* RW CDR kVCO */
+#define REG_DM_CFG1	0x38B	/* RW Postdemodulator Filter */
+#define REG_AGCSTAT	0x38E	/* R RXBB Ref Osc Calibration Engine Readback */
+#define REG_RXCAL0	0x395	/* RW RX BB filter tuning, LSB */
+#define REG_RXCAL1	0x396	/* RW RX BB filter tuning, MSB */
+#define REG_RXFE_CFG	0x39B	/* RW RXBB Ref Osc & RXFE Calibration */
+#define REG_PA_RR	0x3A7	/* RW Set PA ramp rate */
+#define REG_PA_CFG	0x3A8	/* RW PA enable */
+#define REG_EXTPA_CFG	0x3A9	/* RW External PA BIAS DAC */
+#define REG_EXTPA_MSC	0x3AA	/* RW PA Bias Mode */
+#define REG_ADC_RBK	0x3AE	/* R Readback temp */
+#define REG_AGC_CFG1	0x3B2	/* RW GC Parameters */
+#define REG_AGC_MAX	0x3B4	/* RW Slew rate	 */
+#define REG_AGC_CFG2	0x3B6	/* RW RSSI Parameters */
+#define REG_AGC_CFG3	0x3B7	/* RW RSSI Parameters */
+#define REG_AGC_CFG4	0x3B8	/* RW RSSI Parameters */
+#define REG_AGC_CFG5	0x3B9	/* RW RSSI & NDEC Parameters */
+#define REG_AGC_CFG6	0x3BA	/* RW NDEC Parameters */
+#define REG_OCL_CFG1	0x3C4	/* RW OCL System Parameters */
+#define REG_IRQ1_EN0	0x3C7	/* RW Interrupt Mask set bits for IRQ1 */
+#define REG_IRQ1_EN1	0x3C8	/* RW Interrupt Mask set bits for IRQ1 */
+#define REG_IRQ2_EN0	0x3C9	/* RW Interrupt Mask set bits for IRQ2 */
+#define REG_IRQ2_EN1	0x3CA	/* RW Interrupt Mask set bits for IRQ2 */
+#define REG_IRQ1_SRC0	0x3CB	/* RW Interrupt Source bits for IRQ */
+#define REG_IRQ1_SRC1	0x3CC	/* RW Interrupt Source bits for IRQ */
+#define REG_OCL_BW0	0x3D2	/* RW OCL System Parameters */
+#define REG_OCL_BW1	0x3D3	/* RW OCL System Parameters */
+#define REG_OCL_BW2	0x3D4	/* RW OCL System Parameters */
+#define REG_OCL_BW3	0x3D5	/* RW OCL System Parameters */
+#define REG_OCL_BW4	0x3D6	/* RW OCL System Parameters */
+#define REG_OCL_BWS	0x3D7	/* RW OCL System Parameters */
+#define REG_OCL_CFG13	0x3E0	/* RW OCL System Parameters */
+#define REG_GP_DRV	0x3E3	/* RW I/O pads Configuration and bg trim */
+#define REG_BM_CFG	0x3E6	/* RW Batt. Monitor Threshold Voltage setting */
+#define REG_SFD_15_4	0x3F4	/* RW Option to set non standard SFD */
+#define REG_AFC_CFG	0x3F7	/* RW AFC mode and polarity */
+#define REG_AFC_KI_KP	0x3F8	/* RW AFC ki and kp */
+#define REG_AFC_RANGE	0x3F9	/* RW AFC range */
+#define REG_AFC_READ	0x3FA	/* RW Readback frequency error */
+
+/* REG_EXTPA_MSC */
+#define PA_PWR(x)		(((x) & 0xF) << 4)
+#define EXTPA_BIAS_SRC		BIT(3)
+#define EXTPA_BIAS_MODE(x)	(((x) & 0x7) << 0)
+
+/* REG_PA_CFG */
+#define PA_BRIDGE_DBIAS(x)	(((x) & 0x1F) << 0)
+#define PA_DBIAS_HIGH_POWER	21
+#define PA_DBIAS_LOW_POWER	13
+
+/* REG_PA_BIAS */
+#define PA_BIAS_CTRL(x)		(((x) & 0x1F) << 1)
+#define REG_PA_BIAS_DFL		BIT(0)
+#define PA_BIAS_HIGH_POWER	63
+#define PA_BIAS_LOW_POWER	55
+
+#define REG_PAN_ID0		0x112
+#define REG_PAN_ID1		0x113
+#define REG_SHORT_ADDR_0	0x114
+#define REG_SHORT_ADDR_1	0x115
+#define REG_IEEE_ADDR_0		0x116
+#define REG_IEEE_ADDR_1		0x117
+#define REG_IEEE_ADDR_2		0x118
+#define REG_IEEE_ADDR_3		0x119
+#define REG_IEEE_ADDR_4		0x11A
+#define REG_IEEE_ADDR_5		0x11B
+#define REG_IEEE_ADDR_6		0x11C
+#define REG_IEEE_ADDR_7		0x11D
+#define REG_FFILT_CFG		0x11E
+#define REG_AUTO_CFG		0x11F
+#define REG_AUTO_TX1		0x120
+#define REG_AUTO_TX2		0x121
+#define REG_AUTO_STATUS		0x122
+
+/* REG_FFILT_CFG */
+#define ACCEPT_BEACON_FRAMES   BIT(0)
+#define ACCEPT_DATA_FRAMES     BIT(1)
+#define ACCEPT_ACK_FRAMES      BIT(2)
+#define ACCEPT_MACCMD_FRAMES   BIT(3)
+#define ACCEPT_RESERVED_FRAMES BIT(4)
+#define ACCEPT_ALL_ADDRESS     BIT(5)
+
+/* REG_AUTO_CFG */
+#define AUTO_ACK_FRAMEPEND     BIT(0)
+#define IS_PANCOORD	       BIT(1)
+#define RX_AUTO_ACK_EN	       BIT(3)
+#define CSMA_CA_RX_TURNAROUND  BIT(4)
+
+/* REG_AUTO_TX1 */
+#define MAX_FRAME_RETRIES(x)   ((x) & 0xF)
+#define MAX_CCA_RETRIES(x)     (((x) & 0x7) << 4)
+
+/* REG_AUTO_TX2 */
+#define CSMA_MAX_BE(x)	       ((x) & 0xF)
+#define CSMA_MIN_BE(x)	       (((x) & 0xF) << 4)
+
+#define CMD_SPI_NOP		0xFF /* No operation. Use for dummy writes */
+#define CMD_SPI_PKT_WR		0x10 /* Write telegram to the Packet RAM
+				      * starting from the TX packet base address
+				      * pointer tx_packet_base
+				      */
+#define CMD_SPI_PKT_RD		0x30 /* Read telegram from the Packet RAM
+				      * starting from RX packet base address
+				      * pointer rxpb.rx_packet_base
+				      */
+#define CMD_SPI_MEM_WR(x)	(0x18 + (x >> 8)) /* Write data to MCR or
+						   * Packet RAM sequentially
+						   */
+#define CMD_SPI_MEM_RD(x)	(0x38 + (x >> 8)) /* Read data from MCR or
+						   * Packet RAM sequentially
+						   */
+#define CMD_SPI_MEMR_WR(x)	(0x08 + (x >> 8)) /* Write data to MCR or Packet
+						   * RAM as random block
+						   */
+#define CMD_SPI_MEMR_RD(x)	(0x28 + (x >> 8)) /* Read data from MCR or
+						   * Packet RAM random block
+						   */
+#define CMD_SPI_PRAM_WR		0x1E /* Write data sequentially to current
+				      * PRAM page selected
+				      */
+#define CMD_SPI_PRAM_RD		0x3E /* Read data sequentially from current
+				      * PRAM page selected
+				      */
+#define CMD_RC_SLEEP		0xB1 /* Invoke transition of radio controller
+				      * into SLEEP state
+				      */
+#define CMD_RC_IDLE		0xB2 /* Invoke transition of radio controller
+				      * into IDLE state
+				      */
+#define CMD_RC_PHY_RDY		0xB3 /* Invoke transition of radio controller
+				      * into PHY_RDY state
+				      */
+#define CMD_RC_RX		0xB4 /* Invoke transition of radio controller
+				      * into RX state
+				      */
+#define CMD_RC_TX		0xB5 /* Invoke transition of radio controller
+				      * into TX state
+				      */
+#define CMD_RC_MEAS		0xB6 /* Invoke transition of radio controller
+				      * into MEAS state
+				      */
+#define CMD_RC_CCA		0xB7 /* Invoke Clear channel assessment */
+#define CMD_RC_CSMACA		0xC1 /* initiates CSMA-CA channel access
+				      * sequence and frame transmission
+				      */
+#define CMD_RC_PC_RESET		0xC7 /* Program counter reset */
+#define CMD_RC_RESET		0xC8 /* Resets the ADF7242 and puts it in
+				      * the sleep state
+				      */
+#define CMD_RC_PC_RESET_NO_WAIT (CMD_RC_PC_RESET | BIT(31))
+
+/* STATUS */
+
+#define STAT_SPI_READY		BIT(7)
+#define STAT_IRQ_STATUS		BIT(6)
+#define STAT_RC_READY		BIT(5)
+#define STAT_CCA_RESULT		BIT(4)
+#define RC_STATUS_IDLE		1
+#define RC_STATUS_MEAS		2
+#define RC_STATUS_PHY_RDY	3
+#define RC_STATUS_RX		4
+#define RC_STATUS_TX		5
+#define RC_STATUS_MASK		0xF
+
+/* AUTO_STATUS */
+
+#define SUCCESS			0
+#define SUCCESS_DATPEND		1
+#define FAILURE_CSMACA		2
+#define FAILURE_NOACK		3
+#define AUTO_STATUS_MASK	0x3
+
+#define PRAM_PAGESIZE		256
+
+/* IRQ1 */
+
+#define IRQ_CCA_COMPLETE	BIT(0)
+#define IRQ_SFD_RX		BIT(1)
+#define IRQ_SFD_TX		BIT(2)
+#define IRQ_RX_PKT_RCVD		BIT(3)
+#define IRQ_TX_PKT_SENT		BIT(4)
+#define IRQ_FRAME_VALID		BIT(5)
+#define IRQ_ADDRESS_VALID	BIT(6)
+#define IRQ_CSMA_CA		BIT(7)
+
+#define AUTO_TX_TURNAROUND	BIT(3)
+#define ADDON_EN		BIT(4)
+
+struct adf7242_local {
+	struct spi_device *spi;
+	struct completion tx_complete;
+	struct ieee802154_hw *hw;
+	struct mutex bmux; /* protect SPI messages */
+	struct spi_message stat_msg;
+	struct spi_transfer stat_xfer;
+	struct dentry *debugfs_root;
+	int tx_stat;
+	bool start;
+	bool promiscuous;
+	s8 rssi;
+	u8 max_frame_retries;
+	u8 max_cca_retries;
+	u8 max_be;
+	u8 min_be;
+
+	/* DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+
+	u8 buf[3] ____cacheline_aligned;
+	u8 buf_reg_tx[3];
+	u8 buf_read_tx[4];
+	u8 buf_read_rx[4];
+	u8 buf_stat_rx;
+	u8 buf_stat_tx;
+	u8 buf_cmd;
+};
+
+static int adf7242_soft_reset(struct adf7242_local *lp);
+
+static int adf7242_status(struct adf7242_local *lp, u8 *stat)
+{
+	int status;
+
+	mutex_lock(&lp->bmux);
+	status = spi_sync(lp->spi, &lp->stat_msg);
+	*stat = lp->buf_stat_rx;
+	mutex_unlock(&lp->bmux);
+
+	return status;
+}
+
+static int adf7242_wait_status(struct adf7242_local *lp, unsigned status,
+			       unsigned mask, int line)
+{
+	int cnt = 0, ret = 0;
+	u8 stat;
+
+	do {
+		adf7242_status(lp, &stat);
+		cnt++;
+	} while (((stat & mask) != status) && (cnt < MAX_POLL_LOOPS));
+
+	if (cnt >= MAX_POLL_LOOPS) {
+		ret = -ETIMEDOUT;
+
+		if (!(stat & STAT_RC_READY)) {
+			adf7242_soft_reset(lp);
+			adf7242_status(lp, &stat);
+
+			if ((stat & mask) == status)
+				ret = 0;
+		}
+
+		if (ret < 0)
+			dev_warn(&lp->spi->dev,
+				 "%s:line %d Timeout status 0x%x (%d)\n",
+				 __func__, line, stat, cnt);
+	}
+
+	dev_vdbg(&lp->spi->dev, "%s : loops=%d line %d\n", __func__, cnt, line);
+
+	return ret;
+}
+
+static int adf7242_wait_ready(struct adf7242_local *lp, int line)
+{
+	return adf7242_wait_status(lp, STAT_RC_READY | STAT_SPI_READY,
+				   STAT_RC_READY | STAT_SPI_READY, line);
+}
+
+static int adf7242_write_fbuf(struct adf7242_local *lp, u8 *data, u8 len)
+{
+	u8 *buf = lp->buf;
+	int status;
+	struct spi_message msg;
+	struct spi_transfer xfer_head = {
+		.len = 2,
+		.tx_buf = buf,
+
+	};
+	struct spi_transfer xfer_buf = {
+		.len = len,
+		.tx_buf = data,
+	};
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer_head, &msg);
+	spi_message_add_tail(&xfer_buf, &msg);
+
+	adf7242_wait_ready(lp, __LINE__);
+
+	mutex_lock(&lp->bmux);
+	buf[0] = CMD_SPI_PKT_WR;
+	buf[1] = len + 2;
+
+	status = spi_sync(lp->spi, &msg);
+	mutex_unlock(&lp->bmux);
+
+	return status;
+}
+
+static int adf7242_read_fbuf(struct adf7242_local *lp,
+			     u8 *data, size_t len, bool packet_read)
+{
+	u8 *buf = lp->buf;
+	int status;
+	struct spi_message msg;
+	struct spi_transfer xfer_head = {
+		.len = 3,
+		.tx_buf = buf,
+		.rx_buf = buf,
+	};
+	struct spi_transfer xfer_buf = {
+		.len = len,
+		.rx_buf = data,
+	};
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer_head, &msg);
+	spi_message_add_tail(&xfer_buf, &msg);
+
+	adf7242_wait_ready(lp, __LINE__);
+
+	mutex_lock(&lp->bmux);
+	if (packet_read) {
+		buf[0] = CMD_SPI_PKT_RD;
+		buf[1] = CMD_SPI_NOP;
+		buf[2] = 0;	/* PHR */
+	} else {
+		buf[0] = CMD_SPI_PRAM_RD;
+		buf[1] = 0;
+		buf[2] = CMD_SPI_NOP;
+	}
+
+	status = spi_sync(lp->spi, &msg);
+
+	mutex_unlock(&lp->bmux);
+
+	return status;
+}
+
+static int adf7242_read_reg(struct adf7242_local *lp, u16 addr, u8 *data)
+{
+	int status;
+	struct spi_message msg;
+
+	struct spi_transfer xfer = {
+		.len = 4,
+		.tx_buf = lp->buf_read_tx,
+		.rx_buf = lp->buf_read_rx,
+	};
+
+	adf7242_wait_ready(lp, __LINE__);
+
+	mutex_lock(&lp->bmux);
+	lp->buf_read_tx[0] = CMD_SPI_MEM_RD(addr);
+	lp->buf_read_tx[1] = addr;
+	lp->buf_read_tx[2] = CMD_SPI_NOP;
+	lp->buf_read_tx[3] = CMD_SPI_NOP;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	status = spi_sync(lp->spi, &msg);
+	if (msg.status)
+		status = msg.status;
+
+	if (!status)
+		*data = lp->buf_read_rx[3];
+
+	mutex_unlock(&lp->bmux);
+
+	dev_vdbg(&lp->spi->dev, "%s : REG 0x%X, VAL 0x%X\n", __func__,
+		 addr, *data);
+
+	return status;
+}
+
+static int adf7242_write_reg(struct adf7242_local *lp, u16 addr, u8 data)
+{
+	int status;
+
+	adf7242_wait_ready(lp, __LINE__);
+
+	mutex_lock(&lp->bmux);
+	lp->buf_reg_tx[0] = CMD_SPI_MEM_WR(addr);
+	lp->buf_reg_tx[1] = addr;
+	lp->buf_reg_tx[2] = data;
+	status = spi_write(lp->spi, lp->buf_reg_tx, 3);
+	mutex_unlock(&lp->bmux);
+
+	dev_vdbg(&lp->spi->dev, "%s : REG 0x%X, VAL 0x%X\n",
+		 __func__, addr, data);
+
+	return status;
+}
+
+static int adf7242_cmd(struct adf7242_local *lp, unsigned cmd)
+{
+	int status;
+
+	dev_vdbg(&lp->spi->dev, "%s : CMD=0x%X\n", __func__, cmd);
+
+	if (cmd != CMD_RC_PC_RESET_NO_WAIT)
+		adf7242_wait_ready(lp, __LINE__);
+
+	mutex_lock(&lp->bmux);
+	lp->buf_cmd = cmd;
+	status = spi_write(lp->spi, &lp->buf_cmd, 1);
+	mutex_unlock(&lp->bmux);
+
+	return status;
+}
+
+static int adf7242_upload_firmware(struct adf7242_local *lp, u8 *data, u16 len)
+{
+	struct spi_message msg;
+	struct spi_transfer xfer_buf = { };
+	int status, i, page = 0;
+	u8 *buf = lp->buf;
+
+	struct spi_transfer xfer_head = {
+		.len = 2,
+		.tx_buf = buf,
+	};
+
+	buf[0] = CMD_SPI_PRAM_WR;
+	buf[1] = 0;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer_head, &msg);
+	spi_message_add_tail(&xfer_buf, &msg);
+
+	for (i = len; i >= 0; i -= PRAM_PAGESIZE) {
+		adf7242_write_reg(lp, REG_PRAMPG, page);
+
+		xfer_buf.len = (i >= PRAM_PAGESIZE) ? PRAM_PAGESIZE : i;
+		xfer_buf.tx_buf = &data[page * PRAM_PAGESIZE];
+
+		mutex_lock(&lp->bmux);
+		status = spi_sync(lp->spi, &msg);
+		mutex_unlock(&lp->bmux);
+		page++;
+	}
+
+	return status;
+}
+
+#ifdef DEBUG
+static int adf7242_verify_firmware(struct adf7242_local *lp,
+				   const u8 *data, size_t len)
+{
+	int i, j;
+	unsigned int page;
+	u8 *buf = kmalloc(PRAM_PAGESIZE, GFP_KERNEL);
+
+	if (!buf)
+		return -ENOMEM;
+
+	for (page = 0, i = len; i >= 0; i -= PRAM_PAGESIZE, page++) {
+		size_t nb = (i >= PRAM_PAGESIZE) ? PRAM_PAGESIZE : i;
+
+		adf7242_write_reg(lp, REG_PRAMPG, page);
+		adf7242_read_fbuf(lp, buf, nb, false);
+
+		for (j = 0; j < nb; j++) {
+			if (buf[j] != data[page * PRAM_PAGESIZE + j]) {
+				kfree(buf);
+				return -EIO;
+			}
+		}
+	}
+	kfree(buf);
+
+	return 0;
+}
+#endif
+
+static int adf7242_set_txpower(struct ieee802154_hw *hw, int mbm)
+{
+	struct adf7242_local *lp = hw->priv;
+	u8 pwr, bias_ctrl, dbias, tmp;
+	int db = mbm / 100;
+
+	dev_vdbg(&lp->spi->dev, "%s : Power %d dB\n", __func__, db);
+
+	if (db > 5 || db < -26)
+		return -EINVAL;
+
+	db = DIV_ROUND_CLOSEST(db + 29, 2);
+
+	if (db > 15) {
+		dbias = PA_DBIAS_HIGH_POWER;
+		bias_ctrl = PA_BIAS_HIGH_POWER;
+	} else {
+		dbias = PA_DBIAS_LOW_POWER;
+		bias_ctrl = PA_BIAS_LOW_POWER;
+	}
+
+	pwr = clamp_t(u8, db, 3, 15);
+
+	adf7242_read_reg(lp, REG_PA_CFG, &tmp);
+	tmp &= ~PA_BRIDGE_DBIAS(~0);
+	tmp |= PA_BRIDGE_DBIAS(dbias);
+	adf7242_write_reg(lp, REG_PA_CFG, tmp);
+
+	adf7242_read_reg(lp, REG_PA_BIAS, &tmp);
+	tmp &= ~PA_BIAS_CTRL(~0);
+	tmp |= PA_BIAS_CTRL(bias_ctrl);
+	adf7242_write_reg(lp, REG_PA_BIAS, tmp);
+
+	adf7242_read_reg(lp, REG_EXTPA_MSC, &tmp);
+	tmp &= ~PA_PWR(~0);
+	tmp |= PA_PWR(pwr);
+
+	return adf7242_write_reg(lp, REG_EXTPA_MSC, tmp);
+}
+
+static int adf7242_set_csma_params(struct ieee802154_hw *hw, u8 min_be,
+				   u8 max_be, u8 retries)
+{
+	struct adf7242_local *lp = hw->priv;
+	int ret;
+
+	dev_vdbg(&lp->spi->dev, "%s : min_be=%d max_be=%d retries=%d\n",
+		 __func__, min_be, max_be, retries);
+
+	if (min_be > max_be || max_be > 8 || retries > 5)
+		return -EINVAL;
+
+	ret = adf7242_write_reg(lp, REG_AUTO_TX1,
+				MAX_FRAME_RETRIES(lp->max_frame_retries) |
+				MAX_CCA_RETRIES(retries));
+	if (ret)
+		return ret;
+
+	lp->max_cca_retries = retries;
+	lp->max_be = max_be;
+	lp->min_be = min_be;
+
+	return adf7242_write_reg(lp, REG_AUTO_TX2, CSMA_MAX_BE(max_be) |
+			CSMA_MIN_BE(min_be));
+}
+
+static int adf7242_set_frame_retries(struct ieee802154_hw *hw, s8 retries)
+{
+	struct adf7242_local *lp = hw->priv;
+	int ret = 0;
+
+	dev_vdbg(&lp->spi->dev, "%s : Retries = %d\n", __func__, retries);
+
+	if (retries < -1 || retries > 15)
+		return -EINVAL;
+
+	if (retries >= 0)
+		ret = adf7242_write_reg(lp, REG_AUTO_TX1,
+					MAX_FRAME_RETRIES(retries) |
+					MAX_CCA_RETRIES(lp->max_cca_retries));
+
+	lp->max_frame_retries = retries;
+
+	return ret;
+}
+
+static int adf7242_ed(struct ieee802154_hw *hw, u8 *level)
+{
+	struct adf7242_local *lp = hw->priv;
+
+	*level = lp->rssi;
+
+	dev_vdbg(&lp->spi->dev, "%s :Exit level=%d\n",
+		 __func__, *level);
+
+	return 0;
+}
+
+static int adf7242_start(struct ieee802154_hw *hw)
+{
+	struct adf7242_local *lp = hw->priv;
+
+	adf7242_cmd(lp, CMD_RC_PHY_RDY);
+	adf7242_write_reg(lp, REG_IRQ1_SRC1, 0xFF);
+	enable_irq(lp->spi->irq);
+	lp->start = true;
+
+	return adf7242_cmd(lp, CMD_RC_RX);
+}
+
+static void adf7242_stop(struct ieee802154_hw *hw)
+{
+	struct adf7242_local *lp = hw->priv;
+
+	adf7242_cmd(lp, CMD_RC_IDLE);
+	disable_irq(lp->spi->irq);
+	lp->start = false;
+	adf7242_write_reg(lp, REG_IRQ1_SRC1, 0xFF);
+}
+
+static int adf7242_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct adf7242_local *lp = hw->priv;
+	unsigned long freq;
+
+	dev_dbg(&lp->spi->dev, "%s :Channel=%d\n", __func__, channel);
+
+	might_sleep();
+
+	WARN_ON(page != 0);
+	WARN_ON(channel < 11);
+	WARN_ON(channel > 26);
+
+	freq = (2405 + 5 * (channel - 11)) * 100;
+	adf7242_cmd(lp, CMD_RC_PHY_RDY);
+
+	adf7242_write_reg(lp, REG_CH_FREQ0, freq);
+	adf7242_write_reg(lp, REG_CH_FREQ1, freq >> 8);
+	adf7242_write_reg(lp, REG_CH_FREQ2, freq >> 16);
+
+	return adf7242_cmd(lp, CMD_RC_RX);
+}
+
+static int adf7242_set_hw_addr_filt(struct ieee802154_hw *hw,
+				    struct ieee802154_hw_addr_filt *filt,
+				    unsigned long changed)
+{
+	struct adf7242_local *lp = hw->priv;
+	u8 reg;
+
+	dev_dbg(&lp->spi->dev, "%s :Changed=0x%lX\n", __func__, changed);
+
+	might_sleep();
+
+	if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
+		u8 addr[8], i;
+
+		memcpy(addr, &filt->ieee_addr, 8);
+
+		for (i = 0; i < 8; i++)
+			adf7242_write_reg(lp, REG_IEEE_ADDR_0 + i, addr[i]);
+	}
+
+	if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
+		u16 saddr = le16_to_cpu(filt->short_addr);
+
+		adf7242_write_reg(lp, REG_SHORT_ADDR_0, saddr);
+		adf7242_write_reg(lp, REG_SHORT_ADDR_1, saddr >> 8);
+	}
+
+	if (changed & IEEE802154_AFILT_PANID_CHANGED) {
+		u16 pan_id = le16_to_cpu(filt->pan_id);
+
+		adf7242_write_reg(lp, REG_PAN_ID0, pan_id);
+		adf7242_write_reg(lp, REG_PAN_ID1, pan_id >> 8);
+	}
+
+	if (changed & IEEE802154_AFILT_PANC_CHANGED) {
+		adf7242_read_reg(lp, REG_AUTO_CFG, &reg);
+		if (filt->pan_coord)
+			reg |= IS_PANCOORD;
+		else
+			reg &= ~IS_PANCOORD;
+		adf7242_write_reg(lp, REG_AUTO_CFG, reg);
+	}
+
+	return 0;
+}
+
+static int adf7242_set_promiscuous_mode(struct ieee802154_hw *hw, bool on)
+{
+	struct adf7242_local *lp = hw->priv;
+
+	dev_dbg(&lp->spi->dev, "%s : mode %d\n", __func__, on);
+
+	lp->promiscuous = on;
+
+	if (on) {
+		adf7242_write_reg(lp, REG_AUTO_CFG, 0);
+		return adf7242_write_reg(lp, REG_FFILT_CFG,
+				  ACCEPT_BEACON_FRAMES |
+				  ACCEPT_DATA_FRAMES |
+				  ACCEPT_MACCMD_FRAMES |
+				  ACCEPT_ALL_ADDRESS |
+				  ACCEPT_ACK_FRAMES |
+				  ACCEPT_RESERVED_FRAMES);
+	} else {
+		adf7242_write_reg(lp, REG_FFILT_CFG,
+				  ACCEPT_BEACON_FRAMES |
+				  ACCEPT_DATA_FRAMES |
+				  ACCEPT_MACCMD_FRAMES |
+				  ACCEPT_RESERVED_FRAMES);
+
+		return adf7242_write_reg(lp, REG_AUTO_CFG, RX_AUTO_ACK_EN);
+	}
+}
+
+static int adf7242_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct adf7242_local *lp = hw->priv;
+	s8 level = clamp_t(s8, mbm / 100, S8_MIN, S8_MAX);
+
+	dev_dbg(&lp->spi->dev, "%s : level %d\n", __func__, level);
+
+	return adf7242_write_reg(lp, REG_CCA1, level);
+}
+
+static int adf7242_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+	struct adf7242_local *lp = hw->priv;
+	int ret;
+
+	reinit_completion(&lp->tx_complete);
+
+	adf7242_cmd(lp, CMD_RC_PHY_RDY);
+
+	ret = adf7242_write_fbuf(lp, skb->data, skb->len);
+	if (ret)
+		goto err;
+
+	ret = adf7242_cmd(lp, CMD_RC_CSMACA);
+	if (ret)
+		goto err;
+
+	ret = wait_for_completion_interruptible_timeout(&lp->tx_complete, HZ);
+	if (ret == -ERESTARTSYS)
+		goto err;
+	if (ret == 0) {
+		dev_warn(&lp->spi->dev, "Timeout waiting for TX interrupt\n");
+		ret = -ETIMEDOUT;
+		goto err;
+	}
+
+	if (lp->tx_stat != SUCCESS) {
+		dev_dbg(&lp->spi->dev,
+			"Error xmit: Retry count exceeded Status=0x%x\n",
+			lp->tx_stat);
+		ret = -ECOMM;
+	} else {
+		ret = 0;
+	}
+
+err:
+	adf7242_cmd(lp, CMD_RC_RX);
+	return ret;
+}
+
+static int adf7242_rx(struct adf7242_local *lp)
+{
+	struct sk_buff *skb;
+	size_t len;
+	int ret;
+	u8 lqi, len_u8, *data;
+
+	adf7242_read_reg(lp, 0, &len_u8);
+
+	len = len_u8;
+
+	if (!ieee802154_is_valid_psdu_len(len)) {
+		dev_dbg(&lp->spi->dev,
+			"corrupted frame received len %d\n", (int)len);
+		len = IEEE802154_MTU;
+	}
+
+	skb = dev_alloc_skb(len);
+	if (!skb)
+		return -ENOMEM;
+
+	data = skb_put(skb, len);
+	ret = adf7242_read_fbuf(lp, data, len, true);
+
+	if (!ret) {
+		lqi = data[len - 2];
+		lp->rssi = data[len - 1];
+	}
+
+	adf7242_cmd(lp, CMD_RC_RX);
+
+	skb_trim(skb, len - 2);	/* Don't put RSSI/LQI or CRC into the frame */
+
+	ieee802154_rx_irqsafe(lp->hw, skb, lqi);
+
+	dev_dbg(&lp->spi->dev, "%s: ret=%d len=%d lqi=%d rssi=%d\n",
+		__func__, ret, (int)len, (int)lqi, lp->rssi);
+
+	return 0;
+}
+
+static struct ieee802154_ops adf7242_ops = {
+	.owner = THIS_MODULE,
+	.xmit_sync = adf7242_xmit,
+	.ed = adf7242_ed,
+	.set_channel = adf7242_channel,
+	.set_hw_addr_filt = adf7242_set_hw_addr_filt,
+	.start = adf7242_start,
+	.stop = adf7242_stop,
+	.set_csma_params = adf7242_set_csma_params,
+	.set_frame_retries = adf7242_set_frame_retries,
+	.set_txpower = adf7242_set_txpower,
+	.set_promiscuous_mode = adf7242_set_promiscuous_mode,
+	.set_cca_ed_level = adf7242_set_cca_ed_level,
+};
+
+static irqreturn_t adf7242_isr(int irq, void *data)
+{
+	struct adf7242_local *lp = data;
+	u8 irq1, auto_stat = 0, stat = 0, rx_en = 0;
+
+	adf7242_wait_status(lp, RC_STATUS_PHY_RDY, RC_STATUS_MASK, __LINE__);
+
+	adf7242_read_reg(lp, REG_IRQ1_SRC1, &irq1);
+	adf7242_write_reg(lp, REG_IRQ1_SRC1, irq1);
+
+	if (!(irq1 & (IRQ_RX_PKT_RCVD | IRQ_CSMA_CA)))
+		dev_err(&lp->spi->dev, "%s :ERROR IRQ1 = 0x%X\n",
+			__func__, irq1);
+
+	dev_dbg(&lp->spi->dev, "%s IRQ1 = %X:\n%s%s%s%s%s%s%s%s\n",
+		__func__, irq1,
+		irq1 & IRQ_CCA_COMPLETE ? "IRQ_CCA_COMPLETE\n" : "",
+		irq1 & IRQ_SFD_RX ? "IRQ_SFD_RX\n" : "",
+		irq1 & IRQ_SFD_TX ? "IRQ_SFD_TX\n" : "",
+		irq1 & IRQ_RX_PKT_RCVD ? "IRQ_RX_PKT_RCVD\n" : "",
+		irq1 & IRQ_TX_PKT_SENT ? "IRQ_TX_PKT_SENT\n" : "",
+		irq1 & IRQ_CSMA_CA ? "IRQ_CSMA_CA\n" : "",
+		irq1 & IRQ_FRAME_VALID ? "IRQ_FRAME_VALID\n" : "",
+		irq1 & IRQ_ADDRESS_VALID ? "IRQ_ADDRESS_VALID\n" : "");
+
+	adf7242_status(lp, &stat);
+
+	dev_dbg(&lp->spi->dev, "%s STATUS = %X:\n%s\n%s%s%s%s%s\n",
+		__func__, stat,
+		stat & STAT_RC_READY ? "RC_READY" : "RC_BUSY",
+		(stat & 0xf) == RC_STATUS_IDLE ? "RC_STATUS_IDLE" : "",
+		(stat & 0xf) == RC_STATUS_MEAS ? "RC_STATUS_MEAS" : "",
+		(stat & 0xf) == RC_STATUS_PHY_RDY ? "RC_STATUS_PHY_RDY" : "",
+		(stat & 0xf) == RC_STATUS_RX ? "RC_STATUS_RX" : "",
+		(stat & 0xf) == RC_STATUS_TX ? "RC_STATUS_TX" : "");
+
+	if ((irq1 & IRQ_RX_PKT_RCVD) && (irq1 & IRQ_FRAME_VALID)) {
+		adf7242_rx(lp);
+		rx_en = 1;
+	}
+
+	if (irq1 & IRQ_CSMA_CA) {
+		adf7242_read_reg(lp, REG_AUTO_STATUS, &auto_stat);
+		auto_stat &= AUTO_STATUS_MASK;
+
+		dev_dbg(&lp->spi->dev, "%s AUTO_STATUS = %X:\n%s%s%s%s\n",
+			__func__, auto_stat,
+			auto_stat == SUCCESS ? "SUCCESS" : "",
+			auto_stat ==
+			SUCCESS_DATPEND ? "SUCCESS_DATPEND" : "",
+			auto_stat == FAILURE_CSMACA ? "FAILURE_CSMACA" : "",
+			auto_stat == FAILURE_NOACK ? "FAILURE_NOACK" : "");
+
+		/* save CSMA-CA completion status */
+		lp->tx_stat = auto_stat;
+		rx_en = 1;
+
+		complete(&lp->tx_complete);
+	}
+
+	if (!rx_en) {
+		adf7242_cmd(lp, CMD_RC_PHY_RDY);
+		adf7242_write_reg(lp, REG_IRQ1_SRC1, 0xFF);
+		adf7242_cmd(lp, CMD_RC_RX);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int adf7242_soft_reset(struct adf7242_local *lp)
+{
+	dev_warn(&lp->spi->dev, "%s\n", __func__);
+
+	if (lp->start)
+		disable_irq_nosync(lp->spi->irq);
+
+	adf7242_cmd(lp, CMD_RC_PC_RESET_NO_WAIT);
+	usleep_range(200, 250);
+	adf7242_write_reg(lp, REG_PKT_CFG, ADDON_EN | BIT(2));
+	adf7242_cmd(lp, CMD_RC_PHY_RDY);
+	adf7242_set_promiscuous_mode(lp->hw, lp->promiscuous);
+	adf7242_set_csma_params(lp->hw, lp->min_be, lp->max_be,
+				lp->max_cca_retries);
+	adf7242_write_reg(lp, REG_IRQ1_SRC1, 0xFF);
+
+	if (lp->start) {
+		enable_irq(lp->spi->irq);
+		return adf7242_cmd(lp, CMD_RC_RX);
+	}
+
+	return 0;
+}
+
+static int adf7242_hw_init(struct adf7242_local *lp)
+{
+	int ret;
+	const struct firmware *fw;
+
+	adf7242_cmd(lp, CMD_RC_RESET);
+	adf7242_cmd(lp, CMD_RC_IDLE);
+
+	/* get ADF7242 addon firmware
+	 * build this driver as module
+	 * and place under /lib/firmware/adf7242_firmware.bin
+	 * or compile firmware into the kernel.
+	 */
+	ret = request_firmware(&fw, FIRMWARE, &lp->spi->dev);
+	if (ret) {
+		dev_err(&lp->spi->dev,
+			"request_firmware() failed with %d\n", ret);
+		return ret;
+	}
+
+	ret = adf7242_upload_firmware(lp, (u8 *)fw->data, fw->size);
+	if (ret) {
+		dev_err(&lp->spi->dev,
+			"upload firmware failed with %d\n", ret);
+		return ret;
+	}
+
+#ifdef DEBUG
+	ret = adf7242_verify_firmware(lp, (u8 *)fw->data, fw->size);
+	if (ret) {
+		dev_err(&lp->spi->dev,
+			"verify firmware failed with %d\n", ret);
+		return ret;
+	}
+#endif
+
+	adf7242_cmd(lp, CMD_RC_PC_RESET);
+
+	release_firmware(fw);
+
+	adf7242_write_reg(lp, REG_FFILT_CFG,
+			  ACCEPT_BEACON_FRAMES |
+			  ACCEPT_DATA_FRAMES |
+			  ACCEPT_MACCMD_FRAMES |
+			  ACCEPT_RESERVED_FRAMES);
+
+	adf7242_write_reg(lp, REG_AUTO_CFG, RX_AUTO_ACK_EN);
+
+	adf7242_write_reg(lp, REG_PKT_CFG, ADDON_EN | BIT(2));
+
+	adf7242_write_reg(lp, REG_EXTPA_MSC, 0xF1);
+	adf7242_write_reg(lp, REG_RXFE_CFG, 0x1D);
+
+	adf7242_write_reg(lp, REG_IRQ1_EN0, 0);
+	adf7242_write_reg(lp, REG_IRQ1_EN1, IRQ_RX_PKT_RCVD | IRQ_CSMA_CA);
+
+	adf7242_write_reg(lp, REG_IRQ1_SRC1, 0xFF);
+	adf7242_write_reg(lp, REG_IRQ1_SRC0, 0xFF);
+
+	adf7242_cmd(lp, CMD_RC_IDLE);
+
+	return 0;
+}
+
+static int adf7242_stats_show(struct seq_file *file, void *offset)
+{
+	struct adf7242_local *lp = spi_get_drvdata(file->private);
+	u8 stat, irq1, tmp;
+
+	adf7242_status(lp, &stat);
+	adf7242_read_reg(lp, REG_IRQ1_SRC1, &irq1);
+
+	seq_printf(file, "IRQ1 = %X:\n%s%s%s%s%s%s%s%s\n", irq1,
+		   irq1 & IRQ_CCA_COMPLETE ? "IRQ_CCA_COMPLETE\n" : "",
+		   irq1 & IRQ_SFD_RX ? "IRQ_SFD_RX\n" : "",
+		   irq1 & IRQ_SFD_TX ? "IRQ_SFD_TX\n" : "",
+		   irq1 & IRQ_RX_PKT_RCVD ? "IRQ_RX_PKT_RCVD\n" : "",
+		   irq1 & IRQ_TX_PKT_SENT ? "IRQ_TX_PKT_SENT\n" : "",
+		   irq1 & IRQ_CSMA_CA ? "IRQ_CSMA_CA\n" : "",
+		   irq1 & IRQ_FRAME_VALID ? "IRQ_FRAME_VALID\n" : "",
+		   irq1 & IRQ_ADDRESS_VALID ? "IRQ_ADDRESS_VALID\n" : "");
+
+	seq_printf(file, "STATUS = %X:\n%s\n%s%s%s%s%s\n", stat,
+		   stat & STAT_RC_READY ? "RC_READY" : "RC_BUSY",
+		   (stat & 0xf) == RC_STATUS_IDLE ? "RC_STATUS_IDLE" : "",
+		   (stat & 0xf) == RC_STATUS_MEAS ? "RC_STATUS_MEAS" : "",
+		   (stat & 0xf) == RC_STATUS_PHY_RDY ? "RC_STATUS_PHY_RDY" : "",
+		   (stat & 0xf) == RC_STATUS_RX ? "RC_STATUS_RX" : "",
+		   (stat & 0xf) == RC_STATUS_TX ? "RC_STATUS_TX" : "");
+
+	seq_printf(file, "RSSI = %d\n", lp->rssi);
+
+	return 0;
+}
+
+static int adf7242_debugfs_init(struct adf7242_local *lp)
+{
+	char debugfs_dir_name[DNAME_INLINE_LEN + 1] = "adf7242-";
+	struct dentry *stats;
+
+	strncat(debugfs_dir_name, dev_name(&lp->spi->dev), DNAME_INLINE_LEN);
+
+	lp->debugfs_root = debugfs_create_dir(debugfs_dir_name, NULL);
+	if (IS_ERR_OR_NULL(lp->debugfs_root))
+		return PTR_ERR_OR_ZERO(lp->debugfs_root);
+
+	stats = debugfs_create_devm_seqfile(&lp->spi->dev, "status",
+					    lp->debugfs_root,
+					    adf7242_stats_show);
+	return PTR_ERR_OR_ZERO(stats);
+
+	return 0;
+}
+
+static const s32 adf7242_powers[] = {
+	500, 400, 300, 200, 100, 0, -100, -200, -300, -400, -500, -600, -700,
+	-800, -900, -1000, -1100, -1200, -1300, -1400, -1500, -1600, -1700,
+	-1800, -1900, -2000, -2100, -2200, -2300, -2400, -2500, -2600,
+};
+
+static const s32 adf7242_ed_levels[] = {
+	-9000, -8900, -8800, -8700, -8600, -8500, -8400, -8300, -8200, -8100,
+	-8000, -7900, -7800, -7700, -7600, -7500, -7400, -7300, -7200, -7100,
+	-7000, -6900, -6800, -6700, -6600, -6500, -6400, -6300, -6200, -6100,
+	-6000, -5900, -5800, -5700, -5600, -5500, -5400, -5300, -5200, -5100,
+	-5000, -4900, -4800, -4700, -4600, -4500, -4400, -4300, -4200, -4100,
+	-4000, -3900, -3800, -3700, -3600, -3500, -3400, -3200, -3100, -3000
+};
+
+static int adf7242_probe(struct spi_device *spi)
+{
+	struct ieee802154_hw *hw;
+	struct adf7242_local *lp;
+	int ret, irq_type;
+
+	if (!spi->irq) {
+		dev_err(&spi->dev, "no IRQ specified\n");
+		return -EINVAL;
+	}
+
+	hw = ieee802154_alloc_hw(sizeof(*lp), &adf7242_ops);
+	if (!hw)
+		return -ENOMEM;
+
+	lp = hw->priv;
+	lp->hw = hw;
+	lp->spi = spi;
+
+	hw->priv = lp;
+	hw->parent = &spi->dev;
+	hw->extra_tx_headroom = 0;
+
+	/* We support only 2.4 Ghz */
+	hw->phy->supported.channels[0] = 0x7FFF800;
+
+	hw->flags = IEEE802154_HW_OMIT_CKSUM |
+		    IEEE802154_HW_CSMA_PARAMS |
+		    IEEE802154_HW_FRAME_RETRIES | IEEE802154_HW_AFILT |
+		    IEEE802154_HW_PROMISCUOUS;
+
+	hw->phy->flags = WPAN_PHY_FLAG_TXPOWER |
+			 WPAN_PHY_FLAG_CCA_ED_LEVEL |
+			 WPAN_PHY_FLAG_CCA_MODE;
+
+	hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY);
+
+	hw->phy->supported.cca_ed_levels = adf7242_ed_levels;
+	hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(adf7242_ed_levels);
+
+	hw->phy->cca.mode = NL802154_CCA_ENERGY;
+
+	hw->phy->supported.tx_powers = adf7242_powers;
+	hw->phy->supported.tx_powers_size = ARRAY_SIZE(adf7242_powers);
+
+	hw->phy->supported.min_minbe = 0;
+	hw->phy->supported.max_minbe = 8;
+
+	hw->phy->supported.min_maxbe = 3;
+	hw->phy->supported.max_maxbe = 8;
+
+	hw->phy->supported.min_frame_retries = 0;
+	hw->phy->supported.max_frame_retries = 15;
+
+	hw->phy->supported.min_csma_backoffs = 0;
+	hw->phy->supported.max_csma_backoffs = 5;
+
+	ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
+
+	mutex_init(&lp->bmux);
+	init_completion(&lp->tx_complete);
+
+	/* Setup Status Message */
+	lp->stat_xfer.len = 1;
+	lp->stat_xfer.tx_buf = &lp->buf_stat_tx;
+	lp->stat_xfer.rx_buf = &lp->buf_stat_rx;
+	lp->buf_stat_tx = CMD_SPI_NOP;
+
+	spi_message_init(&lp->stat_msg);
+	spi_message_add_tail(&lp->stat_xfer, &lp->stat_msg);
+
+	spi_set_drvdata(spi, lp);
+
+	ret = adf7242_hw_init(lp);
+	if (ret)
+		goto err_hw_init;
+
+	irq_type = irq_get_trigger_type(spi->irq);
+	if (!irq_type)
+		irq_type = IRQF_TRIGGER_HIGH;
+
+	ret = devm_request_threaded_irq(&spi->dev, spi->irq, NULL, adf7242_isr,
+					irq_type | IRQF_ONESHOT,
+					dev_name(&spi->dev), lp);
+	if (ret)
+		goto err_hw_init;
+
+	disable_irq(spi->irq);
+
+	ret = ieee802154_register_hw(lp->hw);
+	if (ret)
+		goto err_hw_init;
+
+	dev_set_drvdata(&spi->dev, lp);
+
+	adf7242_debugfs_init(lp);

Hmm, you want to have DEBUG_FS support always enabled? I was expecting to have it enabled behind a driver debug option as it should not be needed during normal usage. I also expected the firmware_verify function to be triggered from there but I don't have a string opinion on that one.

The Kconfig setup misses a "depends on DEBUG_FS".



+
+	dev_info(&spi->dev, "mac802154 IRQ-%d registered\n", spi->irq);
+
+	return ret;
+
+	ieee802154_unregister_hw(lp->hw);
+err_hw_init:
+	mutex_destroy(&lp->bmux);
+	ieee802154_free_hw(lp->hw);
+
+	return ret;
+}
+
+static int adf7242_remove(struct spi_device *spi)
+{
+	struct adf7242_local *lp = spi_get_drvdata(spi);
+
+	if (!IS_ERR_OR_NULL(lp->debugfs_root))
+		debugfs_remove_recursive(lp->debugfs_root);
+
+	ieee802154_unregister_hw(lp->hw);
+	mutex_destroy(&lp->bmux);
+	ieee802154_free_hw(lp->hw);
+
+	return 0;
+}
+
+static const struct of_device_id adf7242_of_match[] = {
+	{ .compatible = "adi,adf7242", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, adf7242_of_match);
+
+static const struct spi_device_id adf7242_device_id[] = {
+	{ .name = "adf7242", },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, adf7242_device_id);
+
+static struct spi_driver adf7242_driver = {
+	.id_table = adf7242_device_id,
+	.driver = {
+		   .of_match_table = of_match_ptr(adf7242_of_match),
+		   .name = "adf7242",
+		   .owner = THIS_MODULE,
+		   },
+	.probe = adf7242_probe,
+	.remove = adf7242_remove,
+};
+
+module_spi_driver(adf7242_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@xxxxxxxxxx>");
+MODULE_DESCRIPTION("ADF7242 IEEE802.15.4 Transceiver Driver");
+MODULE_LICENSE("GPL");


Besides the question about having DEBUG_FS enabled by default I think this one is fine now to go in.

Reviewed-by: Stefan Schmidt <stefan@xxxxxxxxxxxxxxx>

I will do some testing on the hardware later today and scream if something strange shows up.

regards
Stefan Schmidt
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux