--- tools/btattach.1 | 53 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 tools/btattach.1 diff --git a/tools/btattach.1 b/tools/btattach.1 new file mode 100644 index 0000000..ffd653d --- /dev/null +++ b/tools/btattach.1 @@ -0,0 +1,53 @@ +.TH "btattach" "1" "November 2015" "BlueZ" "Linux System Administration" +.SH NAME +btattach \- attach serial devices to BlueZ stack + +.SH SYNOPSIS +.B btattach +.RB [\| \-B +.IR device \|] +.RB [\| \-A +.IR device \|] +.RB [\| \-P +.IR protocol \|] +.RB [\| \-R \|] + +.SH DESCRIPTION +.LP +btattach is used to attach a serial UART to the Bluetooth stack as a +transport interface. + +.SH OPTIONS +.TP +.BI \-B " device" , " " \--bredr " device" +Attach a BR/EDR controller. +.TP +.BI \-A " device" , " " \--amp " device" +Attach an AMP controller. +.TP +.BI \-P " protocol" , " " \--protocol " protocol" +Specify the protocol type for talking to the device. +Supported values are: +.RS +.IP \(bu 2 +.B h4 +.IP \(bu 2 +.B bcsp +.IP \(bu 2 +.B 3wire +.IP \(bu 2 +.B h4ds +.IP \(bu 2 +.B ll +.IP \(bu 2 +.B ath3k +.IP \(bu 2 +.B intel +.IP \(bu 2 +.B bcm +.IP \(bu 2 +.B qca +.RE +.TP +.B \-R +Set the device into raw mode (the kernel and bluetoothd will ignore it). -- 2.6.3.462.gbe2c914 -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
