From: Zhaoyang Liu <liuzy@xxxxxxxxxxx>
This patch adds support for Marvell's new chipset SD8997.
Register offsets and supported feature flags are updated.
Signed-off-by: Zhaoyang Liu <liuzy@xxxxxxxxxxx>
Signed-off-by: Cathy Luo <cluo@xxxxxxxxxxx>
Signed-off-by: Amitkumar Karwar <akarwar@xxxxxxxxxxx>
---
drivers/bluetooth/Kconfig | 4 ++--
drivers/bluetooth/btmrvl_sdio.c | 36 ++++++++++++++++++++++++++++++++++++
2 files changed, 38 insertions(+), 2 deletions(-)
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 0bd88c9..3d480d8 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -275,7 +275,7 @@ config BT_MRVL
The core driver to support Marvell Bluetooth devices.
This driver is required if you want to support
- Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897.
+ Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8997.
Say Y here to compile Marvell Bluetooth driver
into the kernel or say M to compile it as module.
@@ -289,7 +289,7 @@ config BT_MRVL_SDIO
The driver for Marvell Bluetooth chipsets with SDIO interface.
This driver is required if you want to use Marvell Bluetooth
- devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897
+ devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8997
chipsets are supported.
Say Y here to compile support for Marvell BT-over-SDIO driver
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 5f7c9be..6e2c6d5 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -146,6 +146,29 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8897 = {
.fw_dump_end = 0xea,
};
+static const struct btmrvl_sdio_card_reg btmrvl_reg_8997 = {
+ .cfg = 0x00,
+ .host_int_mask = 0x08,
+ .host_intstatus = 0x0c,
+ .card_status = 0x5c,
+ .sq_read_base_addr_a0 = 0xf8,
+ .sq_read_base_addr_a1 = 0xf9,
+ .card_revision = 0xc8,
+ .card_fw_status0 = 0xe8,
+ .card_fw_status1 = 0xe9,
+ .card_rx_len = 0xea,
+ .card_rx_unit = 0xeb,
+ .io_port_0 = 0xe4,
+ .io_port_1 = 0xe5,
+ .io_port_2 = 0xe6,
+ .int_read_to_clear = true,
+ .host_int_rsr = 0x04,
+ .card_misc_cfg = 0xD8,
+ .fw_dump_ctrl = 0xf0,
+ .fw_dump_start = 0xf1,
+ .fw_dump_end = 0xf8,
+};
+
static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
.helper = "mrvl/sd8688_helper.bin",
.firmware = "mrvl/sd8688.bin",
@@ -191,6 +214,15 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
.supports_fw_dump = true,
};
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8997 = {
+ .helper = NULL,
+ .firmware = "mrvl/sdsd8997_combo.bin",
+ .reg = &btmrvl_reg_8997,
+ .support_pscan_win_report = true,
+ .sd_blksz_fw_dl = 256,
+ .supports_fw_dump = true,
+};
+
static const struct sdio_device_id btmrvl_sdio_ids[] = {
/* Marvell SD8688 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
@@ -210,6 +242,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = {
/* Marvell SD8897 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912E),
.driver_data = (unsigned long) &btmrvl_sdio_sd8897 },
+ /* Marvell SD8997 Bluetooth device */
+ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9142),
+ .driver_data = (unsigned long)&btmrvl_sdio_sd8997 },
{ } /* Terminating entry */
};
@@ -1622,3 +1657,4 @@ MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8887_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sdsd8997_combo.bin");
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
