ACPI table for BCM2E39 of T100TA is not correct.
Set correct irq_polarity for this device.
Signed-off-by: Frederic Danis <frederic.danis@xxxxxxxxxxxxxxx>
---
drivers/bluetooth/hci_bcm.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index f306541..6551251 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -32,6 +32,7 @@
#include <linux/gpio/consumer.h>
#include <linux/tty.h>
#include <linux/interrupt.h>
+#include <linux/dmi.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
@@ -513,6 +514,22 @@ static const struct acpi_gpio_mapping acpi_bcm_default_gpios[] = {
};
#ifdef CONFIG_ACPI
+static u8 acpi_active_low = ACPI_ACTIVE_LOW;
+
+/* IRQ polarity of some chipsets are not defined correctly in ACPI table. */
+static const struct dmi_system_id bcm_wrong_irq_dmi_table[] = {
+ {
+ .ident = "Asus T100TA",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR,
+ "ASUSTeK COMPUTER INC."),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"),
+ },
+ .driver_data = &acpi_active_low,
+ },
+ { }
+};
+
static int bcm_resource(struct acpi_resource *ares, void *data)
{
struct bcm_device *dev = data;
@@ -552,6 +569,7 @@ static int bcm_acpi_probe(struct bcm_device *dev)
const struct acpi_device_id *id;
struct acpi_device *adev;
LIST_HEAD(resources);
+ const struct dmi_system_id *dmi_id;
int ret;
id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
@@ -608,6 +626,12 @@ static int bcm_acpi_probe(struct bcm_device *dev)
acpi_dev_get_resources(adev, &resources, bcm_resource, dev);
+ dmi_id = dmi_first_match(bcm_wrong_irq_dmi_table);
+ if (dmi_id) {
+ bt_dev_dbg(dev, "Fix irq polarity");
+ dev->irq_polarity = *(u8*)dmi_id->driver_data;
+ }
+
return 0;
}
#else
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
