Change some CONFIG_PM_SLEEP to CONFIG_PM as hu and is_suspended parameters
will be used during PM runtime callbacks.
Add __bcm_suspend() and __bcm_resume() which performs link management for
PM callbacks.
Signed-off-by: Frederic Danis <frederic.danis@xxxxxxxxxxxxxxx>
---
drivers/bluetooth/hci_bcm.c | 70 ++++++++++++++++++++++++++-------------------
1 file changed, 41 insertions(+), 29 deletions(-)
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index efb9566..7f63f2b 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -56,7 +56,7 @@ struct bcm_device {
int irq;
u8 irq_polarity;
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
struct hci_uart *hu;
bool is_suspended; /* suspend/resume flag */
#endif
@@ -153,7 +153,7 @@ static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
return 0;
}
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
static irqreturn_t bcm_host_wake(int irq, void *data)
{
struct bcm_device *bdev = data;
@@ -259,7 +259,7 @@ static int bcm_open(struct hci_uart *hu)
if (hu->tty->dev->parent == dev->pdev->dev.parent) {
bcm->dev = dev;
hu->init_speed = dev->init_speed;
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
dev->hu = hu;
#endif
bcm_gpio_set_power(bcm->dev, true);
@@ -283,7 +283,7 @@ static int bcm_close(struct hci_uart *hu)
mutex_lock(&bcm_device_lock);
if (bcm_device_exists(bdev)) {
bcm_gpio_set_power(bdev, false);
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
if (device_can_wakeup(&bdev->pdev->dev)) {
devm_free_irq(&bdev->pdev->dev, bdev->irq, bdev);
device_init_wakeup(&bdev->pdev->dev, false);
@@ -425,6 +425,41 @@ static struct sk_buff *bcm_dequeue(struct hci_uart *hu)
return skb_dequeue(&bcm->txq);
}
+#ifdef CONFIG_PM
+static void __bcm_suspend(struct bcm_device *bdev)
+{
+ if (!bdev->is_suspended && bdev->hu) {
+ hci_uart_set_flow_control(bdev->hu, true);
+
+ /* Once this returns, driver suspends BT via GPIO */
+ bdev->is_suspended = true;
+ }
+
+ /* Suspend the device */
+ if (bdev->device_wakeup) {
+ gpiod_set_value(bdev->device_wakeup, false);
+ bt_dev_dbg(bdev, "suspend, delaying 15 ms");
+ mdelay(15);
+ }
+}
+
+static void __bcm_resume(struct bcm_device *bdev)
+{
+ if (bdev->device_wakeup) {
+ gpiod_set_value(bdev->device_wakeup, true);
+ bt_dev_dbg(bdev, "resume, delaying 15 ms");
+ mdelay(15);
+ }
+
+ /* When this executes, the device has woken up already */
+ if (bdev->is_suspended && bdev->hu) {
+ bdev->is_suspended = false;
+
+ hci_uart_set_flow_control(bdev->hu, false);
+ }
+}
+#endif
+
#ifdef CONFIG_PM_SLEEP
/* Platform suspend callback */
static int bcm_suspend(struct device *dev)
@@ -439,19 +474,7 @@ static int bcm_suspend(struct device *dev)
if (!bdev->hu)
goto unlock;
- if (!bdev->is_suspended) {
- hci_uart_set_flow_control(bdev->hu, true);
-
- /* Once this callback returns, driver suspends BT via GPIO */
- bdev->is_suspended = true;
- }
-
- /* Suspend the device */
- if (bdev->device_wakeup) {
- gpiod_set_value(bdev->device_wakeup, false);
- bt_dev_dbg(bdev, "suspend, delaying 15 ms");
- mdelay(15);
- }
+ __bcm_suspend(bdev);
if (device_may_wakeup(&bdev->pdev->dev)) {
error = enable_irq_wake(bdev->irq);
@@ -482,18 +505,7 @@ static int bcm_resume(struct device *dev)
bt_dev_dbg(bdev, "BCM irq: disabled");
}
- if (bdev->device_wakeup) {
- gpiod_set_value(bdev->device_wakeup, true);
- bt_dev_dbg(bdev, "resume, delaying 15 ms");
- mdelay(15);
- }
-
- /* When this callback executes, the device has woken up already */
- if (bdev->is_suspended) {
- bdev->is_suspended = false;
-
- hci_uart_set_flow_control(bdev->hu, false);
- }
+ __bcm_resume(bdev);
unlock:
mutex_unlock(&bcm_device_lock);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
