Hi Ben, > This is for supporting BT for QCA ROME with specific vendor specific HCI commands and initialization. This will have USB/UART implementation both, but for now, adding UART vendor specific commands to patch downloading and set BDaddress using VS command. Signed-off-by: Ben Young Tae Kim <ytkim@xxxxxxxxxxxxxxxx> --- drivers/bluetooth/Kconfig | 4 + drivers/bluetooth/Makefile | 1 + drivers/bluetooth/btqca.c | 395 +++++++++++++++++++++++++++++++++++++++++++++ drivers/bluetooth/btqca.h | 136 ++++++++++++++++ 4 files changed, 536 insertions(+) create mode 100644 drivers/bluetooth/btqca.c create mode 100644 drivers/bluetooth/btqca.h diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 79e8234..f580334 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -13,6 +13,10 @@ config BT_RTL tristate select FW_LOADER +config BT_QCA + tristate + select FW_LOADER + config BT_HCIBTUSB tristate "HCI USB driver" depends on USB diff --git > a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index f40e194..15a0d1d 100644 --- a/drivers/bluetooth/Makefile +++ b/drivers/bluetooth/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o obj-$(CONFIG_BT_WILINK) += btwilink.o obj-$(CONFIG_BT_BCM) += btbcm.o obj-$(CONFIG_BT_RTL) += btrtl.o +obj-$(CONFIG_BT_QCA) += btqca.o btmrvl-y := btmrvl_main.o btmrvl-$(CONFIG_DEBUG_FS) += btmrvl_debugfs.o diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c new file mode 100644 index 0000000..863cceb --- /dev/null +++ b/drivers/bluetooth/btqca.c @@ -0,0 +1,395 @@ +/* + * Bluetooth supports for Qualcomm Atheros chips + * + * Copyright something went really wrong here ;) Regards Marcel -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
