Introduce the device tree enumerated Broadcom Bluetooth UART driver.
Signed-off-by: Ilya Faenson <ifaenson@xxxxxxxxxxxx>
---
drivers/bluetooth/Kconfig | 9 +
drivers/bluetooth/Makefile | 1 +
drivers/bluetooth/btbcm_uart.c | 673 +++++++++++++++++++++++++++++++++++++++++
drivers/bluetooth/btbcm_uart.h | 89 ++++++
4 files changed, 772 insertions(+)
create mode 100644 drivers/bluetooth/btbcm_uart.c
create mode 100644 drivers/bluetooth/btbcm_uart.h
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 2e77707..5eee3ed 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -143,6 +143,7 @@ config BT_HCIUART_BCM
bool "Broadcom protocol support"
depends on BT_HCIUART
select BT_HCIUART_H4
+ select BT_UART_BCM
select BT_BCM
help
The Broadcom protocol support enables Bluetooth HCI over serial
@@ -150,6 +151,14 @@ config BT_HCIUART_BCM
Say Y here to compile support for Broadcom protocol.
+config BT_UART_BCM
+ tristate "Broadcom BT UART driver"
+ depends on BT_HCIUART_H4 && TTY
+ help
+ This driver supports the HCI_UART_BT protocol.
+
+ It manages Bluetooth UART device properties and GPIOs.
+
config BT_HCIBCM203X
tristate "HCI BCM203x USB driver"
depends on USB
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index f40e194..e908a88 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_BT_MRVL) += btmrvl.o
obj-$(CONFIG_BT_MRVL_SDIO) += btmrvl_sdio.o
obj-$(CONFIG_BT_WILINK) += btwilink.o
obj-$(CONFIG_BT_BCM) += btbcm.o
+obj-$(CONFIG_BT_UART_BCM) += btbcm_uart.o
obj-$(CONFIG_BT_RTL) += btrtl.o
btmrvl-y := btmrvl_main.o
diff --git a/drivers/bluetooth/btbcm_uart.c b/drivers/bluetooth/btbcm_uart.c
new file mode 100644
index 0000000..ccd02a9
--- /dev/null
+++ b/drivers/bluetooth/btbcm_uart.c
@@ -0,0 +1,673 @@
+/*
+ * Bluetooth BCM UART Driver
+ *
+ * Copyright (c) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/poll.h>
+
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/signal.h>
+#include <linux/ioctl.h>
+#include <linux/skbuff.h>
+#include <linux/list.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+
+#include "btbcm_uart.h"
+
+static int idle_timeout = 5;
+module_param(idle_timeout, int, 0);
+MODULE_PARM_DESC(idle_timeout, "Bluetooth idle timeout in seconds");
+
+/* Device context */
+struct bcm_device {
+ struct list_head list;
+
+ struct platform_device *pdev;
+ struct gpio_desc *bt_wake_gpio;
+ struct gpio_desc *dev_wake_gpio;
+ struct gpio_desc *reg_on_gpio;
+ int bt_wake_irq;
+ int dev_wake_active_low;
+ int reg_on_active_low;
+ int bt_wake_active_low;
+ bool configure_sleep;
+ u32 manual_fc;
+ u32 oper_speed;
+ bool configure_audio;
+ u32 pcm_clockmode;
+ u32 pcm_fillmethod;
+ u32 pcm_fillnum;
+ u32 pcm_fillvalue;
+ u32 pcm_incallbitclock;
+ u32 pcm_lsbfirst;
+ u32 pcm_rightjustify;
+ u32 pcm_routing;
+ u32 pcm_shortframesync;
+ u32 pcm_syncmode;
+
+ char tty_name[64];
+
+ struct btbcm_uart_callbacks protocol_callbacks;
+ struct work_struct wakeup_work;
+};
+
+/* List of BCM BT UART devices */
+static DEFINE_SPINLOCK(device_list_lock);
+static LIST_HEAD(device_list);
+
+/*
+ * Calling the BCM protocol at lower execution priority
+ */
+static void bcm_bt_wakeup_task(struct work_struct *ws)
+{
+ int gpio_value;
+ struct bcm_device *p_bcm_device =
+ container_of(ws, struct bcm_device, wakeup_work);
+
+ if (!p_bcm_device) {
+ BT_DBG("%s - failing, no device", __func__);
+ return;
+ }
+
+ /* Make sure the device is resumed */
+ gpio_value = !p_bcm_device->dev_wake_active_low;
+ if (p_bcm_device->dev_wake_gpio) {
+ gpiod_set_value(p_bcm_device->dev_wake_gpio, gpio_value);
+ BT_DBG("%s - resume %d written, delaying 15 ms",
+ __func__, gpio_value);
+ mdelay(15);
+ }
+
+ /* Let the protocol know it's time to wake up */
+ if (p_bcm_device->protocol_callbacks.p_wakeup)
+ p_bcm_device->protocol_callbacks.p_wakeup(
+ p_bcm_device->protocol_callbacks.context);
+}
+
+/*
+ * Interrupt routine for the wake from the device
+ */
+static irqreturn_t bcm_bt_uart_isr(int irq, void *context)
+{
+ unsigned int bt_wake;
+ struct bcm_device *p = (struct bcm_device *)context;
+
+ bt_wake = gpiod_get_value(p->bt_wake_gpio);
+ BT_DBG("%s with bt_wake of %d (active_low %d), req bh",
+ __func__, bt_wake, p->bt_wake_active_low);
+
+ /* Defer the actual processing to the platform work queue */
+ schedule_work(&p->wakeup_work);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Device instance startup
+ */
+static int bcm_bt_uart_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct device_node *np = pdev->dev.of_node;
+ const char *tty_name;
+ struct bcm_device *p_bcm_device = NULL;
+
+ p_bcm_device = devm_kzalloc(&pdev->dev, sizeof(*p_bcm_device),
+ GFP_KERNEL);
+ if (!p_bcm_device) {
+ BT_DBG("%s - failing due to no memory", __func__);
+ return -ENOMEM;
+ }
+ p_bcm_device->pdev = pdev;
+ BT_DBG("%s %p context", __func__, p_bcm_device);
+
+ /* Get dev wake GPIO */
+ p_bcm_device->dev_wake_gpio = gpiod_get(&pdev->dev, "bt-wake");
+ BT_DBG("%s - gpiod_get for bt-wake returned %p",
+ __func__, p_bcm_device->dev_wake_gpio);
+ if (IS_ERR(p_bcm_device->dev_wake_gpio)) {
+ ret = PTR_ERR(p_bcm_device->dev_wake_gpio);
+ if (ret != -ENOENT) {
+ dev_err(&pdev->dev,
+ "%s - dev_wake GPIO: %d\n", __func__, ret);
+ }
+ p_bcm_device->dev_wake_gpio = NULL;
+ } else {
+ int gpio_value;
+
+ p_bcm_device->dev_wake_active_low = gpiod_is_active_low
+ (p_bcm_device->dev_wake_gpio);
+ BT_DBG("%s - dev_wake a-low is %d (cans %d)",
+ __func__, p_bcm_device->dev_wake_active_low,
+ gpiod_cansleep(p_bcm_device->dev_wake_gpio));
+
+ /* configure dev_wake as output with init resumed state */
+ gpio_value = !p_bcm_device->dev_wake_active_low;
+ ret = gpiod_direction_output(p_bcm_device->dev_wake_gpio,
+ gpio_value);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "%s s dev_wake GPIO: %d\n", __func__, ret);
+ gpiod_put(p_bcm_device->dev_wake_gpio);
+ p_bcm_device->dev_wake_gpio = NULL;
+ goto end;
+ } else {
+ BT_DBG("%s - dev_wake set to %d", __func__,
+ gpio_value);
+ }
+ }
+
+ /* Get power on/off GPIO */
+ p_bcm_device->reg_on_gpio = gpiod_get(&pdev->dev, "bt-reg-on");
+ BT_DBG("%s - gpiod_get for bt-reg-on returned %p", __func__,
+ p_bcm_device->reg_on_gpio);
+ if (IS_ERR(p_bcm_device->reg_on_gpio)) {
+ ret = PTR_ERR(p_bcm_device->reg_on_gpio);
+ if (ret != -ENOENT) {
+ dev_err(&pdev->dev,
+ "%s - reg_on GPIO: %d\n", __func__, ret);
+ }
+ p_bcm_device->reg_on_gpio = NULL;
+ } else {
+ int poweron_flag;
+
+ p_bcm_device->reg_on_active_low = gpiod_is_active_low
+ (p_bcm_device->reg_on_gpio);
+ BT_DBG("%s - reg_on a-low is %d (cans %d)",
+ __func__, p_bcm_device->reg_on_active_low,
+ gpiod_cansleep(p_bcm_device->reg_on_gpio));
+
+ /* configure reg_on as output with init on state */
+ poweron_flag = !p_bcm_device->reg_on_active_low;
+ ret = gpiod_direction_output(p_bcm_device->reg_on_gpio,
+ poweron_flag);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "%s set reg_on GPIO: %d\n", __func__, ret);
+ gpiod_put(p_bcm_device->reg_on_gpio);
+ p_bcm_device->reg_on_gpio = NULL;
+ } else {
+ BT_DBG("%s - reg_on initially set to %d", __func__,
+ poweron_flag);
+ }
+ }
+
+ platform_set_drvdata(pdev, p_bcm_device);
+ /* Must be done before interrupt is requested */
+ INIT_WORK(&p_bcm_device->wakeup_work, bcm_bt_wakeup_task);
+
+ /* Get bt host wake GPIO */
+ p_bcm_device->bt_wake_gpio = gpiod_get(&pdev->dev, "bt-host-wake");
+ BT_DBG("%s - gpiod_get for bt-host-wake returned %p", __func__,
+ p_bcm_device->bt_wake_gpio);
+ if (IS_ERR(p_bcm_device->bt_wake_gpio)) {
+ ret = PTR_ERR(p_bcm_device->bt_wake_gpio);
+ if (ret != -ENOENT) {
+ dev_err(&pdev->dev,
+ "%s - bt_wake GPIO: %d\n", __func__, ret);
+ }
+ p_bcm_device->bt_wake_gpio = NULL;
+ } else {
+ /* configure bt_wake as input */
+ ret = gpiod_direction_input(p_bcm_device->bt_wake_gpio);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "%s set bt_wake GPIO: %d\n", __func__, ret);
+ gpiod_put(p_bcm_device->bt_wake_gpio);
+ p_bcm_device->bt_wake_gpio = NULL;
+ } else {
+ p_bcm_device->bt_wake_active_low = gpiod_is_active_low
+ (p_bcm_device->bt_wake_gpio);
+ BT_DBG("%s -bt_wake a-low is %d(cans%d)",
+ __func__, p_bcm_device->bt_wake_active_low,
+ gpiod_cansleep(p_bcm_device->bt_wake_gpio));
+ p_bcm_device->bt_wake_irq = gpiod_to_irq
+ (p_bcm_device->bt_wake_gpio);
+ if (p_bcm_device->bt_wake_irq < 0) {
+ dev_err(&pdev->dev,
+ "%s - HOST_WAKE IRQ: %d\n", __func__, ret);
+ } else {
+ unsigned long intflags = IRQF_TRIGGER_RISING;
+
+ if (p_bcm_device->bt_wake_active_low)
+ intflags = IRQF_TRIGGER_FALLING;
+
+ ret = request_irq(p_bcm_device->bt_wake_irq,
+ bcm_bt_uart_isr,
+ intflags, "bt_host_wake",
+ p_bcm_device);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "%s - failed IRQ %d: %d",
+ __func__,
+ p_bcm_device->bt_wake_irq, ret);
+ } else {
+ BT_DBG("%s - IRQ %d", __func__,
+ p_bcm_device->bt_wake_irq);
+ }
+ }
+ }
+ }
+
+ p_bcm_device->configure_sleep = of_property_read_bool(
+ np, "configure-sleep");
+ BT_DBG("configure-sleep read as %d", p_bcm_device->configure_sleep);
+ p_bcm_device->manual_fc = 0;
+ if (!of_property_read_u32(np, "manual-fc",
+ &p_bcm_device->manual_fc)) {
+ BT_DBG("manual-fc read as %d",
+ p_bcm_device->manual_fc);
+ }
+ p_bcm_device->oper_speed = 3000000;
+ if (!of_property_read_u32(
+ np, "oper-speed",
+ &p_bcm_device->oper_speed)) {
+ BT_DBG("oper-speed read as %d",
+ p_bcm_device->oper_speed);
+ }
+ p_bcm_device->configure_audio = of_property_read_bool(
+ np, "configure-audio");
+ BT_DBG("configure-audio read as %d", p_bcm_device->configure_audio);
+ if (p_bcm_device->configure_audio) {
+ /* Defaults for audio */
+ p_bcm_device->pcm_clockmode = 0;
+ p_bcm_device->pcm_fillmethod = 2;
+ p_bcm_device->pcm_fillnum = 0;
+ p_bcm_device->pcm_fillvalue = 3;
+ p_bcm_device->pcm_incallbitclock = 0;
+ p_bcm_device->pcm_lsbfirst = 0;
+ p_bcm_device->pcm_rightjustify = 0;
+ p_bcm_device->pcm_routing = 0;
+ p_bcm_device->pcm_shortframesync = 0;
+ p_bcm_device->pcm_syncmode = 0;
+
+ if (!of_property_read_u32(np, "pcm-clockmode",
+ &p_bcm_device->pcm_clockmode))
+ BT_DBG("pcm-clockmode read as %d",
+ p_bcm_device->pcm_clockmode);
+ if (!of_property_read_u32(np, "pcm-fillmethod",
+ &p_bcm_device->pcm_fillmethod))
+ BT_DBG("pcm-fillmethod readas %d",
+ p_bcm_device->pcm_fillmethod);
+ if (!of_property_read_u32(np, "pcm-fillnum",
+ &p_bcm_device->pcm_fillnum))
+ BT_DBG("pcm-fillnum read as %d",
+ p_bcm_device->pcm_fillnum);
+ if (!of_property_read_u32(np, "pcm-fillvalue",
+ &p_bcm_device->pcm_fillvalue))
+ BT_DBG("pcm-fillvalue read as %d",
+ p_bcm_device->pcm_fillvalue);
+ if (!of_property_read_u32(np, "pcm-incallbitclock",
+ &p_bcm_device->pcm_incallbitclock))
+ BT_DBG("pcm-incallbitclock read as %d",
+ p_bcm_device->pcm_incallbitclock);
+ if (!of_property_read_u32(np, "pcm-lsbfirst",
+ &p_bcm_device->pcm_lsbfirst))
+ BT_DBG("pcm-lsbfirst read as %d",
+ p_bcm_device->pcm_lsbfirst);
+ if (!of_property_read_u32(np, "pcm-rightjustify",
+ &p_bcm_device->pcm_rightjustify))
+ BT_DBG("pcm-rightjustify read as %d",
+ p_bcm_device->pcm_rightjustify);
+ if (!of_property_read_u32(np, "pcm-routing",
+ &p_bcm_device->pcm_routing))
+ BT_DBG("pcm-routing read as %d",
+ p_bcm_device->pcm_routing);
+ if (!of_property_read_u32(np, "pcm-shortframesync",
+ &p_bcm_device->pcm_shortframesync))
+ BT_DBG("pcm-shortframesync read as %d",
+ p_bcm_device->pcm_shortframesync);
+ if (!of_property_read_u32(np, "pcm-syncmode",
+ &p_bcm_device->pcm_syncmode))
+ BT_DBG("pcm-syncmode read as %d",
+ p_bcm_device->pcm_syncmode);
+ }
+
+ if (!of_property_read_string(np, "tty", &tty_name)) {
+ strcpy(p_bcm_device->tty_name, tty_name);
+ BT_DBG("tty name read as %s", p_bcm_device->tty_name);
+ }
+
+ BT_DBG("idle_timeout set as %d", idle_timeout);
+
+ ret = 0; /* If we made it here, we're fine */
+
+ /* Place this instance on the device list */
+ spin_lock(&device_list_lock);
+ list_add_tail(&p_bcm_device->list, &device_list);
+ spin_unlock(&device_list_lock);
+
+end:
+ if (ret) {
+ if (p_bcm_device->reg_on_gpio) {
+ gpiod_put(p_bcm_device->reg_on_gpio);
+ p_bcm_device->reg_on_gpio = NULL;
+ }
+ if (p_bcm_device->bt_wake_gpio) {
+ gpiod_put(p_bcm_device->bt_wake_gpio);
+ p_bcm_device->bt_wake_gpio = NULL;
+ }
+ if (p_bcm_device->dev_wake_gpio) {
+ gpiod_put(p_bcm_device->dev_wake_gpio);
+ p_bcm_device->dev_wake_gpio = NULL;
+ }
+ }
+
+ BT_DBG("%s with the result %d", __func__, ret);
+ return ret;
+}
+
+/*
+ * Device instance removal
+ */
+static int bcm_bt_uart_remove(struct platform_device *pdev)
+{
+ struct bcm_device *p_bcm_device = platform_get_drvdata(pdev);
+
+ if (p_bcm_device == NULL) {
+ BT_DBG("%s - logic error, no probe?!", __func__);
+ return 0;
+ }
+
+ BT_DBG("%s %p context", __func__, p_bcm_device);
+
+ spin_lock(&device_list_lock);
+ list_del(&p_bcm_device->list);
+ spin_unlock(&device_list_lock);
+
+ BT_DBG("%s - freeing interrupt %d", __func__,
+ p_bcm_device->bt_wake_irq);
+ free_irq(p_bcm_device->bt_wake_irq, p_bcm_device);
+
+ if (p_bcm_device->reg_on_gpio) {
+ BT_DBG("%s - releasing reg_on_gpio", __func__);
+ gpiod_put(p_bcm_device->reg_on_gpio);
+ p_bcm_device->reg_on_gpio = NULL;
+ }
+
+ if (p_bcm_device->dev_wake_gpio) {
+ BT_DBG("%s - releasing dev_wake_gpio", __func__);
+ gpiod_put(p_bcm_device->dev_wake_gpio);
+ p_bcm_device->dev_wake_gpio = NULL;
+ }
+
+ if (p_bcm_device->bt_wake_gpio) {
+ BT_DBG("%s - releasing bt_wake_gpio", __func__);
+ gpiod_put(p_bcm_device->bt_wake_gpio);
+ p_bcm_device->bt_wake_gpio = NULL;
+ }
+
+ BT_DBG("%s %p done", __func__, p_bcm_device);
+ return 0;
+}
+
+/*
+ * Platform resume callback
+ */
+static int bcm_bt_uart_resume(struct device *pdev)
+{
+ int gpio_value;
+ struct bcm_device *p_bcm_device = platform_get_drvdata(
+ to_platform_device(pdev));
+
+ if (p_bcm_device == NULL) {
+ BT_DBG("%s - logic error, no device?!", __func__);
+ return 0;
+ }
+
+ BT_DBG("%s %p", __func__, p_bcm_device);
+
+ gpio_value = !p_bcm_device->dev_wake_active_low;
+ if (p_bcm_device->dev_wake_gpio) {
+ gpiod_set_value(p_bcm_device->dev_wake_gpio, gpio_value);
+ BT_DBG("%s - %d written, delaying 15 ms", __func__,
+ gpio_value);
+ mdelay(15);
+ }
+
+ /* Let the protocol know the platform is resuming */
+ if (p_bcm_device->protocol_callbacks.p_resume)
+ p_bcm_device->protocol_callbacks.p_resume(
+ p_bcm_device->protocol_callbacks.context);
+
+ return 0;
+}
+
+/*
+ * Platform suspend callback
+ */
+static int bcm_bt_uart_suspend(struct device *pdev)
+{
+ int gpio_value;
+ struct bcm_device *p_bcm_device = platform_get_drvdata(
+ to_platform_device(pdev));
+
+ if (p_bcm_device == NULL) {
+ BT_DBG("%s - logic error, no device?!", __func__);
+ return 0;
+ }
+
+ BT_DBG("%s %p", __func__, p_bcm_device);
+
+ /* Let the protocol know the platform is suspending */
+ if (p_bcm_device->protocol_callbacks.p_suspend)
+ p_bcm_device->protocol_callbacks.p_suspend(
+ p_bcm_device->protocol_callbacks.context);
+
+ /* Suspend the device */
+ if (p_bcm_device->dev_wake_gpio) {
+ gpio_value = !!p_bcm_device->dev_wake_active_low;
+ gpiod_set_value(p_bcm_device->dev_wake_gpio, gpio_value);
+ BT_DBG("%s - %d written, delaying 15 ms", __func__,
+ gpio_value);
+ mdelay(15);
+ }
+
+ return 0;
+}
+
+/*
+ * Entry point for calls from the protocol
+ */
+int btbcm_uart_control(int action, void *device_context,
+ void *p_data, unsigned long *p_size)
+{
+ struct btbcm_uart_callbacks *pc;
+ struct btbcm_uart_parameters *pp = p_data; /* for pars action only */
+ int ret = 0;
+ int gpio_value, poweron_flag;
+ struct bcm_device *p_bcm_device = device_context;
+ struct list_head *ptr;
+ bool is_found = false;
+
+ /* Special processing for the callback configuration */
+ if (action == BTBCM_UART_ACTION_CONFIGURE_CALLBACKS) {
+ pc = p_data;
+
+ BT_DBG("%s - configure callbacks", __func__);
+ if (p_data == NULL || *p_size != sizeof(struct
+ btbcm_uart_callbacks) || (pc->interface_version !=
+ BTBCM_UART_INTERFACE_VERSION)) {
+ BT_DBG("%s - callbacks mismatch!", __func__);
+ return -E2BIG;
+ }
+
+ BT_DBG("%s - configure callbacks for %s(%p)", __func__,
+ pc->name, pc->context);
+ if (p_bcm_device == NULL) {
+ spin_lock(&device_list_lock);
+ list_for_each(ptr, &device_list) {
+ p_bcm_device = list_entry(ptr, struct
+ bcm_device, list);
+ if (!strcmp(p_bcm_device->tty_name, pc->name)) {
+ is_found = true;
+ break;
+ }
+ }
+
+ spin_unlock(&device_list_lock);
+ if (!is_found) {
+ BT_DBG("%s - no device!", __func__);
+ return -ENOENT;
+ }
+ }
+
+ p_bcm_device->protocol_callbacks = *pc;
+ memcpy(p_data, &p_bcm_device, sizeof(p_bcm_device));
+ *p_size = sizeof(p_bcm_device);
+ return ret;
+ }
+
+ /* All other requests must have the right context */
+ if (p_bcm_device == NULL) {
+ BT_DBG("%s - failing, no device", __func__);
+ return -ENOENT;
+ }
+
+ switch (action) {
+ case BTBCM_UART_ACTION_POWER_ON:
+ BT_DBG("%s %p - power on", __func__, device_context);
+ if (p_bcm_device->reg_on_gpio) {
+ poweron_flag = !p_bcm_device->reg_on_active_low;
+ gpiod_set_value(p_bcm_device->reg_on_gpio,
+ poweron_flag);
+ BT_DBG("%s - pwron %d, delay 15 ms", __func__,
+ poweron_flag);
+ mdelay(15);
+ }
+ break;
+
+ case BTBCM_UART_ACTION_POWER_OFF:
+ BT_DBG("%s %p - power off", __func__, device_context);
+ if (p_bcm_device->reg_on_gpio) {
+ poweron_flag = p_bcm_device->reg_on_active_low;
+ gpiod_set_value(p_bcm_device->reg_on_gpio,
+ poweron_flag);
+ BT_DBG("%s - pwroff %d, delay 15 ms", __func__,
+ poweron_flag);
+ mdelay(15);
+ }
+ break;
+
+ case BTBCM_UART_ACTION_RESUME:
+ BT_DBG("%s %p - resume", __func__, device_context);
+ if (p_bcm_device->dev_wake_gpio) {
+ gpio_value = !p_bcm_device->dev_wake_active_low;
+ gpiod_set_value(p_bcm_device->dev_wake_gpio,
+ gpio_value);
+ BT_DBG("%s - resume %d, delay 15 ms", __func__,
+ gpio_value);
+ mdelay(15);
+ }
+ break;
+
+ case BTBCM_UART_ACTION_SUSPEND:
+ BT_DBG("%s %p - suspend", __func__, device_context);
+ if (p_bcm_device->dev_wake_gpio) {
+ gpio_value = !!p_bcm_device->dev_wake_active_low;
+ gpiod_set_value(p_bcm_device->dev_wake_gpio,
+ gpio_value);
+ BT_DBG("btbcm_uart_control - suspend %d, delay 15ms",
+ gpio_value);
+ mdelay(15);
+ }
+ break;
+
+ case BTBCM_UART_ACTION_GET_PARAMETERS:
+ BT_DBG("%s %p - get pars", __func__, device_context);
+ if ((p_data == NULL) ||
+ (*p_size < sizeof(struct btbcm_uart_parameters))) {
+ BT_DBG("%s - failing, wrong par size", __func__);
+ return -E2BIG;
+ }
+
+ memset(pp, 0, sizeof(struct btbcm_uart_parameters));
+ pp->interface_version = BTBCM_UART_INTERFACE_VERSION;
+ pp->configure_sleep = p_bcm_device->configure_sleep;
+ pp->manual_fc = p_bcm_device->manual_fc;
+ pp->dev_wake_active_low = p_bcm_device->dev_wake_active_low;
+ pp->bt_wake_active_low = p_bcm_device->bt_wake_active_low;
+ pp->idle_timeout_in_secs = idle_timeout;
+ pp->oper_speed = p_bcm_device->oper_speed;
+ pp->configure_audio = p_bcm_device->configure_audio;
+ pp->pcm_clockmode = p_bcm_device->pcm_clockmode;
+ pp->pcm_fillmethod = p_bcm_device->pcm_fillmethod;
+ pp->pcm_fillnum = p_bcm_device->pcm_fillnum;
+ pp->pcm_fillvalue = p_bcm_device->pcm_fillvalue;
+ pp->pcm_incallbitclock = p_bcm_device->pcm_incallbitclock;
+ pp->pcm_lsbfirst = p_bcm_device->pcm_lsbfirst;
+ pp->pcm_rightjustify = p_bcm_device->pcm_rightjustify;
+ pp->pcm_routing = p_bcm_device->pcm_routing;
+ pp->pcm_shortframesync = p_bcm_device->pcm_shortframesync;
+ pp->pcm_syncmode = p_bcm_device->pcm_syncmode;
+ *p_size = sizeof(struct btbcm_uart_parameters);
+ break;
+
+ default:
+ BT_DBG("%s %p unknown act %d", __func__,
+ device_context, action);
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(btbcm_uart_control);
+
+/* Platform susp and resume callbacks */
+static SIMPLE_DEV_PM_OPS(bcm_bt_uart_pm_ops,
+ bcm_bt_uart_suspend, bcm_bt_uart_resume);
+
+/* Driver match table */
+static const struct of_device_id bcm_bt_uart_table[] = {
+ { .compatible = "brcm,brcm-bt-uart" },
+ {}
+};
+
+/* Driver configuration */
+static struct platform_driver bcm_bt_uart_driver = {
+ .probe = bcm_bt_uart_probe,
+ .remove = bcm_bt_uart_remove,
+ .driver = {
+ .name = "brcm_bt_uart",
+ .of_match_table = of_match_ptr(bcm_bt_uart_table),
+ .owner = THIS_MODULE,
+ .pm = &bcm_bt_uart_pm_ops,
+ },
+};
+
+module_platform_driver(bcm_bt_uart_driver);
+
+MODULE_AUTHOR("Ilya Faenson");
+MODULE_DESCRIPTION("Broadcom Bluetooth UART Driver");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/bluetooth/btbcm_uart.h b/drivers/bluetooth/btbcm_uart.h
new file mode 100644
index 0000000..fbc7285
--- /dev/null
+++ b/drivers/bluetooth/btbcm_uart.h
@@ -0,0 +1,89 @@
+/*
+ * Bluetooth BCM UART Driver Header
+ *
+ * Copyright (c) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef BTBCM_UART_H
+#define BTBCM_UART_H
+
+/* Change the version if you change anything in this header */
+#define BTBCM_UART_INTERFACE_VERSION 1
+/* Callbacks from the driver into the protocol */
+typedef void (*p_suspend_callback)(void *context);
+typedef void (*p_resume_callback)(void *context);
+typedef void (*p_wakeup_callback)(void *context);
+struct btbcm_uart_callbacks {
+ int interface_version; /* interface # compiled against */
+ void *context; /* protocol instance context */
+ char name[64]; /* protocol tty device, for example, ttyS0 */
+
+ /* client callbacks */
+ p_suspend_callback p_suspend;
+ p_resume_callback p_resume;
+ p_wakeup_callback p_wakeup;
+};
+
+/* Driver parameters retrieved from the DT or ACPI */
+struct btbcm_uart_parameters {
+ int interface_version; /* interface # compiled against */
+
+ /* Parameters themselves */
+ bool configure_sleep;
+ int manual_fc;
+ int dev_wake_active_low;
+ int bt_wake_active_low;
+ int idle_timeout_in_secs;
+ int oper_speed;
+ bool configure_audio;
+ int pcm_clockmode;
+ int pcm_fillmethod;
+ int pcm_fillnum;
+ int pcm_fillvalue;
+ int pcm_incallbitclock;
+ int pcm_lsbfirst;
+ int pcm_rightjustify;
+ int pcm_routing;
+ int pcm_shortframesync;
+ int pcm_syncmode;
+};
+
+/*
+ * Actions on the BTBCM_UART driver
+ */
+
+/* Configure protocol callbacks */
+#define BTBCM_UART_ACTION_CONFIGURE_CALLBACKS 0
+
+/* Retrieve BT device parameters */
+#define BTBCM_UART_ACTION_GET_PARAMETERS 1
+
+/* Resume the BT device via GPIO */
+#define BTBCM_UART_ACTION_RESUME 2
+
+/* Suspend the BT device via GPIO */
+#define BTBCM_UART_ACTION_SUSPEND 3
+
+/* Power the BT device off via GPIO */
+#define BTBCM_UART_ACTION_POWER_OFF 4
+
+/* Power the BT device on via GPIO */
+#define BTBCM_UART_ACTION_POWER_ON 5
+
+/* Execute an action on the BT device */
+extern int btbcm_uart_control(int action, void *device_context,
+ void *p_data, unsigned long *p_size);
+
+#endif
+
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
