On 06/06/15 08:40, Marcel Holtmann wrote:
Hi Ilya,
Device Tree bindings to configure the Broadcom Bluetooth UART device.
Updated not to use CamelCase and to use Intel style "oper-speed".
Signed-off-by: Ilya Faenson<ifaenson@xxxxxxxxxxxx>
---
.../devicetree/bindings/net/bluetooth/btbcm.txt | 82 ++++++++++++++++++++++
1 file changed, 82 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/bluetooth/btbcm.txt
diff --git a/Documentation/devicetree/bindings/net/bluetooth/btbcm.txt b/Documentation/devicetree/bindings/net/bluetooth/btbcm.txt
new file mode 100644
index 0000000..2679819
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth/btbcm.txt
@@ -0,0 +1,82 @@
+btbcm
+------
+
+Required properties:
+
+ - compatible : must be "brcm,brcm-bt-uart".
+ - tty : tty device connected to this Bluetooth device.
+
+Optional properties:
+
+ - bt-host-wake-gpios : bt-host-wake input GPIO to be used as an interrupt.
+
+ - bt-wake-gpios : bt-wake output GPIO to be used to suspend / resume device.
+
+ - bt-reg-on-gpios : reg-on output GPIO to be used to power device on/off.
+
+ - oper-speed : Bluetooth device operational baud rate.
+ Default: 3000000.
+
+ - manual-fc : flow control UART in suspend / resume scenarios.
+ Default: 0.
+
+ - configure-sleep : configure suspend / resume flag.
+ Default: false.
+
+ - configure-audio : configure platform PCM SCO flag.
+ Default: false.
+
+ - pcm-clockmode : PCM clock mode. 0-slave, 1-master.
+ Default: 0.
+
+ - pcm-fillmethod : PCM fill method. 0 to 3.
+ Default: 2.
+
+ - pcm-fillnum : PCM number of fill bits. 0 to 3.
+ Default: 0.
+
+ - pcm-fillvalue : PCM fill value. 0 to 7.
+ Default: 3.
+
+ - pcm-incallbitclock : PCM interface rate. 0-128Kbps, 1-256Kbps, 2-512Kbps,
+ 3-1024Kbps, 4-2048Kbps.
+ Default: 0.
+
+ - pcm-lsbfirst : PCM LSB first. 0 or 1.
+ Default: 0.
+
+ - pcm-rightjustify : PCM Justify. 0-left, 1-right.
+ Default: 0.
+
+ - pcm-routing : PCM routing. 0-PCM, 1-SCO over HCI.
+ Default: 0.
+
+ - pcm-shortframesync : PCM sync. 0-short, 1-long.
+ Default: 0.
+
+ - pcmsyncmode : PCM sync mode. 0-slave, 1-master.
+ Default: 0.
+
+
+Example:
+
+ brcm4354_bt_uart: brcm4354-bt-uart {
at some point you have to explain to me if Broadcom prefers BCM or BRCM. I can not make heads or tail out of it. My current explanation is the it is BCM for the Bluetooth guys and BRCM for the WiFi guys ;)
That's a nice explanation ;-) Maybe I can give it a shot. First, two
facts: 1) BRCM is our stock symbol, and 2) our device names are prefixed
by BCM. So in devicetree specifications we specified the vendor prefix
as BRCM and (try to) stick to that. The above clearly refers to a device
so it would probably be better to use bcm4354... there.
+ compatible = "brcm,brcm-bt-uart";
The compatible string indeed starts with vendor prefix "brcm,".
+ bt-wake-gpios =<&gpio4 30 GPIO_ACTIVE_HIGH>;
+ bt-host-wake-gpios =<&gpio4 31 GPIO_ACTIVE_HIGH>;
+ tty = "ttyS0”;
This tty one is the one we need to figure out. Could we reference by some node information instead of the assigned device name. If we can reference something in struct device that we know is more consistent, that would be perfect. I mean if the kernel for reason decides to enumerate things in a different order then this might be ttyS1 out of a sudden.
I see your point, but not sure what to do here either. In devicetree you
could reference the uart node, but I don't know if there is an api in
the kernel to obtain tty associated with a uart port. I could not find
it doing quick glance in include/linux/tty.h although the linkage is
obviously there in the data types.
Regards,
Arend
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html