Add "waiting for configuration" address. Add lmp_subver and firmware name for BCM4324B3 controller. Signed-off-by: Frederic Danis <frederic.danis@xxxxxxxxxxxxxxx> --- drivers/bluetooth/btbcm.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c index 728fce3..acb9171 100644 --- a/drivers/bluetooth/btbcm.c +++ b/drivers/bluetooth/btbcm.c @@ -33,6 +33,7 @@ #define VERSION "0.1" #define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}}) +#define BDADDR_BCM4324B3 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb3, 0x24, 0x43}}) int btbcm_check_bdaddr(struct hci_dev *hdev) { @@ -56,10 +57,11 @@ int btbcm_check_bdaddr(struct hci_dev *hdev) bda = (struct hci_rp_read_bd_addr *)skb->data; - /* The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller - * with no configured address. + /* Check if the address indicates a controller with no configured + * address. */ - if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0)) { + if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0) || + !bacmp(&bda->bdaddr, BDADDR_BCM4324B3)) { BT_INFO("%s: BCM: Using default device address (%pMR)", hdev->name, &bda->bdaddr); set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); @@ -242,6 +244,7 @@ static const struct { const char *name; } bcm_uart_subver_table[] = { { 0x410e, "BCM43341B0" }, /* 002.001.014 */ + { 0x4406, "BCM4324B3" }, /* 002.004.006 */ { } }; @@ -296,6 +299,7 @@ int btbcm_setup_patchram(struct hci_dev *hdev) switch ((rev & 0xf000) >> 12) { case 0: + case 3: for (i = 0; bcm_uart_subver_table[i].name; i++) { if (subver == bcm_uart_subver_table[i].subver) { hw_name = bcm_uart_subver_table[i].name; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html