At Tue, 12 May 2015 18:18:13 -0700,
Laura Abbott wrote:
>
> (cc-ing linux-usb as well)
>
> On 05/12/2015 08:14 AM, Marcel Holtmann wrote:
> > Hi Laura,
> >
> >>>> We've received a number of reports of warnings when coming
> >>>> out of suspend with certain bluetooth firmware configurations:
> >>>>
> >>>> WARNING: CPU: 3 PID: 3280 at drivers/base/firmware_class.c:1126
> >>>> _request_firmware+0x558/0x810()
> >>>> Modules linked in: ccm ip6t_rpfilter ip6t_REJECT nf_reject_ipv6
> >>>> xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter
> >>>> ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6
> >>>> ip6table_mangle ip6table_security ip6table_raw ip6table_filter
> >>>> ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4
> >>>> nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw
> >>>> binfmt_misc bnep intel_rapl iosf_mbi arc4 x86_pkg_temp_thermal
> >>>> snd_hda_codec_hdmi coretemp kvm_intel joydev snd_hda_codec_realtek
> >>>> iwldvm snd_hda_codec_generic kvm iTCO_wdt mac80211 iTCO_vendor_support
> >>>> snd_hda_intel snd_hda_controller snd_hda_codec crct10dif_pclmul
> >>>> snd_hwdep crc32_pclmul snd_seq crc32c_intel ghash_clmulni_intel uvcvideo
> >>>> snd_seq_device iwlwifi btusb videobuf2_vmalloc snd_pcm videobuf2_core
> >>>> serio_raw bluetooth cfg80211 videobuf2_memops sdhci_pci v4l2_common
> >>>> videodev thinkpad_acpi sdhci i2c_i801 lpc_ich mfd_core wacom mmc_core
> >>>> media snd_timer tpm_tis hid_logitech_hidpp wmi tpm rfkill snd mei_me mei
> >>>> shpchp soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc i915
> >>>> i2c_algo_bit drm_kms_helper e1000e drm hid_logitech_dj ptp pps_core
> >>>> video
> >>>> CPU: 3 PID: 3280 Comm: kworker/u17:0 Not tainted 3.19.3-200.fc21.x86_64
> >>>> Hardware name: LENOVO 343522U/343522U, BIOS GCET96WW (2.56 ) 10/22/2013
> >>>> Workqueue: hci0 hci_power_on [bluetooth]
> >>>> 0000000000000000 0000000089944328 ffff88040acffb78 ffffffff8176e215
> >>>> 0000000000000000 0000000000000000 ffff88040acffbb8 ffffffff8109bc1a
> >>>> 0000000000000000 ffff88040acffcd0 00000000fffffff5 ffff8804076bac40
> >>>> Call Trace:
> >>>> [<ffffffff8176e215>] dump_stack+0x45/0x57
> >>>> [<ffffffff8109bc1a>] warn_slowpath_common+0x8a/0xc0
> >>>> [<ffffffff8109bd4a>] warn_slowpath_null+0x1a/0x20
> >>>> [<ffffffff814dbe78>] _request_firmware+0x558/0x810
> >>>> [<ffffffff814dc165>] request_firmware+0x35/0x50
> >>>> [<ffffffffa03a7886>] btusb_setup_bcm_patchram+0x86/0x590 [btusb]
> >>>> [<ffffffff814d40e6>] ? rpm_idle+0xd6/0x230
> >>>> [<ffffffffa04d4801>] hci_dev_do_open+0xe1/0xa90 [bluetooth]
> >>>> [<ffffffff810c51dd>] ? ttwu_do_activate.constprop.90+0x5d/0x70
> >>>> [<ffffffffa04d5980>] hci_power_on+0x40/0x200 [bluetooth]
> >>>> [<ffffffff810b487c>] process_one_work+0x14c/0x3f0
> >>>> [<ffffffff810b52f3>] worker_thread+0x53/0x470
> >>>> [<ffffffff810b52a0>] ? rescuer_thread+0x300/0x300
> >>>> [<ffffffff810ba548>] kthread+0xd8/0xf0
> >>>> [<ffffffff810ba470>] ? kthread_create_on_node+0x1b0/0x1b0
> >>>> [<ffffffff81774958>] ret_from_fork+0x58/0x90
> >>>> [<ffffffff810ba470>] ? kthread_create_on_node+0x1b0/0x1b0
> >>>>
> >>>> This occurs after every resume.
> >>>>
> >>>> When resuming, the bluetooth stack calls hci_register_dev,
> >>>> allocates a new workqueue, and immediately schedules the
> >>>> power_on on the newly created workqueue. Since the new
> >>>> workqueue is not freezable, the work runs immediately and
> >>>> triggers the warning since resume is still happening and
> >>>> usermodehelper has not yet been re-enabled. Fix this by
> >>>> making the request workqueue freezable. This ensures
> >>>> the work will not run until unfreezing occurs and usermodehelper
> >>>> is re-enabled.
> >>>>
> >>>> Signed-off-by: Laura Abbott <labbott@xxxxxxxxxxxxxxxxx>
> >>>> ---
> >>>> Resend because I think this got lost in the thread.
> >>>> This should be fixing the actual root cause of the warnings.
> >>>
> >>> so I am not convinced that it actually fixes the root cause. This is just papering over it.
> >>>
> >>> The problem is pretty clear, the firmware for some of the Bluetooth controllers is optional and that means during the original hotplug event it will not be found and the controller keeps operating. However for some reason instead of actually suspending and resuming the Bluetooth controller, we see a unplug + replug (since we are going through probe) and that is causing this funny behaviour.
> >>>
> >>
> >> Fundamentally the issue is the request_firmware is being called at the
> >> wrong time. From Documentation/workqueue.txt:
> >>
> >> WQ_FREEZABLE
> >>
> >> A freezable wq participates in the freeze phase of the system
> >> suspend operations. Work items on the wq are drained and no
> >> new work item starts execution until thawed.
> >>
> >>
> >> By making the request workqueue freezable, any work that gets scheduled
> >> will not run until the time for tasks to unthaw.
> >> 4320f6b1d9db4ca912c5eb6ecb328b2e090e1586
> >> ("PM / sleep: Fix request_firmware() error at resume") fixed the resume
> >> path such that before all tasks are unthawed, calls to
> >> usermodehelper_read_trylock will block until usermodehelper is fully
> >> resumed. This means that any task which is frozen and then woken up
> >> again should have the right sequencing for usermodehelper. The workqueue
> >> which handled the bluetooth power on was never being frozen properly so
> >> there was never any guarantee of when it would run. This patch gives
> >> it the necessary sequence.
> >>
> >>> So how does making one of the core workqueues freezable fixes this the right way. I do not even know how many other side effects that might have. That hdev->req_workqueue is a Bluetooth core internal workqueue that we are using for multiple tasks.
> >>>
> >>> Rather tell me on why we are probing the USB devices that might need firmware without having userspace ready. It sounds to me that the USB driver probe callback should be delayed if we can not guarantee that it can request firmware. As I explained many times, the call path that causes this is going through probe callback of the driver itself.
> >>>
> >>
> >> I agree that if the driver probe function was requesting firmware
> >> directly there would be a problem. The power_on function is already
> >> being called asynchronously on a workqueue. Making that workqueue freezable does exactly the delay you describe.
> >
> > I am not convinced. Now we are hacking the Bluetooth core layer (which has nothing to do with the drivers suspend/resume or probe) to do something different so that we do not see this warning.
> >
> > I can not do anything about the platform in question choosing a unplug/replug for suspend/resume instead of having a proper USB suspend and resume handling. That is pretty much out of our control. I would rather have the USB subsystem delay the probe() callback if we tell it to. Of just have request_firmware() actually sleep until userspace is ready. Seriously, why is request_firmware not just sleeping for us.
> >
>
> The closest thing to blocking is usermodehelper_read_lock_wait which
> waits for a limited amount of time. Takashi Iwai proposed switching
> to that unconditionally for all request_firmware but I never saw a
> response from the firmware maintainers. I suspect that may not be
> acceptable because if the firmware actually needs to block it should
> be an asynchronous call. The firmware maintainers can correct me
> if I'm incorrect in my understanding.
IIRC, the reason of using usermodehelper_read_trylock() for the normal
request_firmware() (not the nowait one) is to check the call of
request_firmware() in the resume callback. If the firmware hasn't
been cached, it should fail.
So, using _trylock() there isn't wrong, per se. It's indeed safer.
But, the problem is that _trylock() is used unconditionally for all
request_firmware() calls even if it's never from the resume path.
Maybe we should allow the f/w loader caller to specify whether to use
UMH trylock or wait. The patch below exposes _request_firmware() and
FW_OPT_ flags. Then BT driver can call like
_request_firmware(&fw, name, dev,
FW_OPT_UEVENT | FW_OPT_NO_WARN | FW_OPT_UMH_LOCK_WAIT)
Note that the patch is totally untested!
Or doesn't this look intuitive enough?
Takashi
---
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 171841ad1008..47eb5551c119 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -97,21 +97,6 @@ static inline long firmware_loading_timeout(void)
return loading_timeout > 0 ? loading_timeout * HZ : MAX_JIFFY_OFFSET;
}
-/* firmware behavior options */
-#define FW_OPT_UEVENT (1U << 0)
-#define FW_OPT_NOWAIT (1U << 1)
-#ifdef CONFIG_FW_LOADER_USER_HELPER
-#define FW_OPT_USERHELPER (1U << 2)
-#else
-#define FW_OPT_USERHELPER 0
-#endif
-#ifdef CONFIG_FW_LOADER_USER_HELPER_FALLBACK
-#define FW_OPT_FALLBACK FW_OPT_USERHELPER
-#else
-#define FW_OPT_FALLBACK 0
-#endif
-#define FW_OPT_NO_WARN (1U << 3)
-
struct firmware_cache {
/* firmware_buf instance will be added into the below list */
spinlock_t lock;
@@ -1085,7 +1070,7 @@ static int assign_firmware_buf(struct firmware *fw, struct device *device,
}
/* called from request_firmware() and request_firmware_work_func() */
-static int
+int
_request_firmware(const struct firmware **firmware_p, const char *name,
struct device *device, unsigned int opt_flags)
{
@@ -1099,13 +1084,16 @@ _request_firmware(const struct firmware **firmware_p, const char *name,
if (!name || name[0] == '\0')
return -EINVAL;
+ /* Need to pin this module until return */
+ __module_get(THIS_MODULE);
+
ret = _request_firmware_prepare(&fw, name, device);
if (ret <= 0) /* error or already assigned */
goto out;
ret = 0;
timeout = firmware_loading_timeout();
- if (opt_flags & FW_OPT_NOWAIT) {
+ if (opt_flags & FW_OPT_UMH_LOCK_WAIT) {
timeout = usermodehelper_read_lock_wait(timeout);
if (!timeout) {
dev_dbg(device, "firmware: %s loading timed out\n",
@@ -1147,67 +1135,10 @@ _request_firmware(const struct firmware **firmware_p, const char *name,
}
*firmware_p = fw;
- return ret;
-}
-
-/**
- * request_firmware: - send firmware request and wait for it
- * @firmware_p: pointer to firmware image
- * @name: name of firmware file
- * @device: device for which firmware is being loaded
- *
- * @firmware_p will be used to return a firmware image by the name
- * of @name for device @device.
- *
- * Should be called from user context where sleeping is allowed.
- *
- * @name will be used as $FIRMWARE in the uevent environment and
- * should be distinctive enough not to be confused with any other
- * firmware image for this or any other device.
- *
- * Caller must hold the reference count of @device.
- *
- * The function can be called safely inside device's suspend and
- * resume callback.
- **/
-int
-request_firmware(const struct firmware **firmware_p, const char *name,
- struct device *device)
-{
- int ret;
-
- /* Need to pin this module until return */
- __module_get(THIS_MODULE);
- ret = _request_firmware(firmware_p, name, device,
- FW_OPT_UEVENT | FW_OPT_FALLBACK);
- module_put(THIS_MODULE);
- return ret;
-}
-EXPORT_SYMBOL(request_firmware);
-
-/**
- * request_firmware_direct: - load firmware directly without usermode helper
- * @firmware_p: pointer to firmware image
- * @name: name of firmware file
- * @device: device for which firmware is being loaded
- *
- * This function works pretty much like request_firmware(), but this doesn't
- * fall back to usermode helper even if the firmware couldn't be loaded
- * directly from fs. Hence it's useful for loading optional firmwares, which
- * aren't always present, without extra long timeouts of udev.
- **/
-int request_firmware_direct(const struct firmware **firmware_p,
- const char *name, struct device *device)
-{
- int ret;
-
- __module_get(THIS_MODULE);
- ret = _request_firmware(firmware_p, name, device,
- FW_OPT_UEVENT | FW_OPT_NO_WARN);
module_put(THIS_MODULE);
return ret;
}
-EXPORT_SYMBOL_GPL(request_firmware_direct);
+EXPORT_SYMBOL_GPL(_request_firmware);
/**
* release_firmware: - release the resource associated with a firmware image
@@ -1291,6 +1222,7 @@ request_firmware_nowait(
fw_work->context = context;
fw_work->cont = cont;
fw_work->opt_flags = FW_OPT_NOWAIT | FW_OPT_FALLBACK |
+ FW_OPT_UMH_LOCK_WAIT |
(uevent ? FW_OPT_UEVENT : FW_OPT_USERHELPER);
if (!try_module_get(module)) {
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
index 5c41c5e75b5c..460aa30965cf 100644
--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -39,23 +39,21 @@ struct builtin_fw {
__used __section(.builtin_fw) = { name, blob, size }
#if defined(CONFIG_FW_LOADER) || (defined(CONFIG_FW_LOADER_MODULE) && defined(MODULE))
-int request_firmware(const struct firmware **fw, const char *name,
- struct device *device);
+int _request_firmware(const struct firmware **firmware_p, const char *name,
+ struct device *device, unsigned int opt_flags);
int request_firmware_nowait(
struct module *module, bool uevent,
const char *name, struct device *device, gfp_t gfp, void *context,
void (*cont)(const struct firmware *fw, void *context));
-int request_firmware_direct(const struct firmware **fw, const char *name,
- struct device *device);
-
void release_firmware(const struct firmware *fw);
#else
-static inline int request_firmware(const struct firmware **fw,
- const char *name,
- struct device *device)
+static inline int
+_request_firmware(const struct firmware **firmware_p, const char *name,
+ struct device *device, unsigned int opt_flags)
{
return -EINVAL;
}
+
static inline int request_firmware_nowait(
struct module *module, bool uevent,
const char *name, struct device *device, gfp_t gfp, void *context,
@@ -67,13 +65,69 @@ static inline int request_firmware_nowait(
static inline void release_firmware(const struct firmware *fw)
{
}
+#endif
-static inline int request_firmware_direct(const struct firmware **fw,
- const char *name,
- struct device *device)
+/* firmware behavior options */
+#define FW_OPT_UEVENT (1U << 0)
+#define FW_OPT_NOWAIT (1U << 1)
+#ifdef CONFIG_FW_LOADER_USER_HELPER
+#define FW_OPT_USERHELPER (1U << 2)
+#else
+#define FW_OPT_USERHELPER 0
+#endif
+#ifdef CONFIG_FW_LOADER_USER_HELPER_FALLBACK
+#define FW_OPT_FALLBACK FW_OPT_USERHELPER
+#else
+#define FW_OPT_FALLBACK 0
+#endif
+#define FW_OPT_NO_WARN (1U << 3)
+#define FW_OPT_UMH_LOCK_WAIT (1U << 4)
+
+/**
+ * request_firmware: - send firmware request and wait for it
+ * @firmware_p: pointer to firmware image
+ * @name: name of firmware file
+ * @device: device for which firmware is being loaded
+ *
+ * @firmware_p will be used to return a firmware image by the name
+ * of @name for device @device.
+ *
+ * Should be called from user context where sleeping is allowed.
+ *
+ * @name will be used as $FIRMWARE in the uevent environment and
+ * should be distinctive enough not to be confused with any other
+ * firmware image for this or any other device.
+ *
+ * Caller must hold the reference count of @device.
+ *
+ * The function can be called safely inside device's suspend and
+ * resume callback.
+ **/
+static inline int
+request_firmware(const struct firmware **firmware_p, const char *name,
+ struct device *device)
{
- return -EINVAL;
+ return _request_firmware(firmware_p, name, device,
+ FW_OPT_UEVENT | FW_OPT_FALLBACK);
+}
+
+/**
+ * request_firmware_direct: - load firmware directly without usermode helper
+ * @firmware_p: pointer to firmware image
+ * @name: name of firmware file
+ * @device: device for which firmware is being loaded
+ *
+ * This function works pretty much like request_firmware(), but this doesn't
+ * fall back to usermode helper even if the firmware couldn't be loaded
+ * directly from fs. Hence it's useful for loading optional firmwares, which
+ * aren't always present, without extra long timeouts of udev.
+ **/
+static inline int
+request_firmware_direct(const struct firmware **firmware_p,
+ const char *name, struct device *device)
+{
+ return _request_firmware(firmware_p, name, device,
+ FW_OPT_UEVENT | FW_OPT_NO_WARN);
}
-#endif
#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
