> Hi Ankur, > > > I am new to the BT LE and pls bare with me if I ask some silly questions. > Thank you for support. > > > > I am now using 3.18.12 Linux kernel and Bluez 5.30 version on board. Our > product requirement is to support only LE modes. To create PICS for host > system using bluez, do I have to take > http://git.kernel.org/cgit/bluetooth/bluez.git/tree/android/pics-gap.txt as a > reference for selecting the configuration? > > If yes, then in that case, why it has Broadcaster and Observer selected to > 'False' under line#150-151 in pics-gap.txt as bluez does supports > Central/Broadcaster/Observer LE roles as mentioned under bluez- > 5.30/doc/supported-features.txt? > > the main focus is central and peripheral role when it comes to Android. The > broadcaster and observer roles are connectionless and not much in use. > > You can select them in the PICS and qualify BlueZ as broadcaster and > observer only, but then a lot of the settings need to be chosen correctly. In > addition bluetoothd will not be of much help since that is build for central and > peripheral roles. > > > Inaddition, I am having some issue running the testcase > TC_IDLE_NAMP_BV_02_C. pts-gts.txt says: "btmgmt advertising on" should > work, but it is not working on my side. > > > > Following Log info: > > Test case : TC_IDLE_NAMP_BV_02_C started > > - MTC: Successfully received > HCI_LE_CLEAR_WHITE_LIST_COMPLETE_EVENT. > > - MTC: Successfully received > HCI_LE_ADD_DEVICE_TO_WHITE_LIST_COMPLETE_EVENT. > > - MTC: Successfully received > HCI_LE_SET_SCAN_PARAMETERS_COMPLETE_EVENT. > > - MTC: Successfully received > HCI_LE_SET_SCAN_ENABLE_COMPLETE_EVENT. > > - MTC: Receive Advertising report successfully. > > - MTC: Successfully received > HCI_LE_SET_SCAN_ENABLE_COMPLETE_EVENT. > > - MTC: ATT connection established successfully. > > - MTC-INCONC: Error returned in ATT_READ_BY_TYPE_CFM. > > - CM_EXIT > > - CM_EXIT > > - CM_EXIT > > - CM_EXIT > > - MTC: Test case ended > > -Final Verdict: INCONC > > TC_IDLE_NAMP_BV_02_C finished > > > > - Prior to running above command I have also set name using > command 'btmgmt name test_dev'. Do I need to run more commands to it? > > The name also needs to be available via a GAP characteristic. Normally > running bluetoothd will do that for you. But if you do that manually, then > need to register the GAP services. > > Regards > > Marcel @Marcel @Luiz: Appreciate your help. Let me do some homework. I am looking forward to create similar documentation as available for android. Regards, Ankur -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
