Hi Luiz,
> -----Original Message-----
> From: linux-bluetooth-owner@xxxxxxxxxxxxxxx [mailto:linux-bluetooth-
> owner@xxxxxxxxxxxxxxx] On Behalf Of Luiz Augusto von Dentz
> Sent: Monday, May 11, 2015 5:06 PM
> To: Gowtham Anandha Babu
> Cc: linux-bluetooth@xxxxxxxxxxxxxxx; Bharat Bhusan Panda;
> cpgs@xxxxxxxxxxx; Grzegorz Kolodziejczyk
> Subject: Re: Query regarding bneptest tool
>
> Hi Gowtham,
>
> On Mon, May 11, 2015 at 2:06 PM, Gowtham Anandha Babu
> <gowtham.ab@xxxxxxxxxxx> wrote:
> > Hi All,
> >
> > I am testing BlueZ bnep test tool (tools/bneptest) using PTS 6.1.0.
> > The BNEP client test cases are not passing in BT_IO_SEC_MEDIUM
> > security level.
> > My PTS PICS and PIXIT are same as android/pixit-bnep.txt,
> > android/pics-bnep.txt.
> > Whereas when the security level is BT_IO_SEC_LOW, it is passing.
> > If it is a valid fix, then I will send a patch for the same.
> > This is tested in Linux, not sure about android.
>
> It might be related to pairing then, do you have any agent registered in the
> system? Check the HCI logs with btmon, it should tell us what is happening.
>
I have attached both logs. Below is the procedure I followed.
--------------------------------------------------------------------
PTS output:
Test case : TC_CTRL_BV_02_C started
- Received passkey: 564246, from: gowtham-ab-0
- User canceled the current operation MMI.
- MMI CM_EXIT
- got an OTHERWISE
- MTC: Test case ended
-Final Verdict: INCONC
TC_CTRL_BV_02_C finished
--------------------------------------------------------------------
BlueZ output:
/latest_bluez/bluez/test$ sudo ./bneptest -c 00:1B:DC:07:33:4E -b pan0 -n bnep0
bnep_client_connect
connecting 00:1B:DC:07:33:4E
cannot initiate bnep connection
connected_client_cb
^Cgot sig = 2, cleaning up...
cleanup successful - exit
--------------------------------------------------------------------
/latest_bluez/bluez/test$ ./simple-agent
Agent registered
Release
gowtham.ab@gowtham-ab:~/latest_bluez/bluez/test$ ./simple-agent
Agent registered
RequestConfirmation (/org/bluez/hci0/dev_00_1B_DC_07_33_4E, 564246)
Confirm passkey (yes/no): yes
Release
--------------------------------------------------------------------
After confirming the passkey, it becomes Authentication Failure and Remote User Terminated Connection
as captured in btmon, hcidump logs.
What might be the problem?
> >
> > diff --git a/tools/bneptest.c b/tools/bneptest.c index
> > 98ee9b1..fccecd2 100644
> > --- a/tools/bneptest.c
> > +++ b/tools/bneptest.c
> > @@ -477,7 +477,7 @@ static int bnep_client_connect(void)
> > BT_IO_OPT_SOURCE_BDADDR, &src_addr,
> > BT_IO_OPT_DEST_BDADDR, &dst_addr,
> > BT_IO_OPT_PSM, BNEP_PSM,
> > - BT_IO_OPT_SEC_LEVEL,
> > BT_IO_SEC_MEDIUM,
> > + BT_IO_OPT_SEC_LEVEL,
> > + BT_IO_SEC_LOW,
> > BT_IO_OPT_OMTU, BNEP_MTU,
> > BT_IO_OPT_IMTU, BNEP_MTU,
> > BT_IO_OPT_INVALID);
> >
> >
> > Regards,
> > Gowtham Anandha Babu
> >
>
>
>
> --
> Luiz Augusto von Dentz
> --
Regards,
Gowtham Anandha Babu
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo
> info at http://vger.kernel.org/majordomo-info.html
Bluetooth monitor ver 5.30
= New Index: 00:1A:7D:DA:71:13 (BR/EDR,USB,hci0) [hci0] 0.818376
@ Device Removed: 00:1B:DC:07:33:4E (0)
@ Device Removed: 00:1A:7D:DA:71:13 (0)
@ Device Removed: 00:02:CA:C0:54:EF (0)
@ Device Removed: CC:C3:EA:FF:E2:5F (0)
< HCI Command: Write Extended Inquiry.. (0x03|0x0052) plen 241 [hci0] 7.860053
FEC: Not required (0x00)
Name (complete): gowtham-ab-0
TX power: 4 dBm
Device ID: USB Implementer's Forum assigned (0x0002)
Vendor: Linux Foundation (0x1d6b)
Product: 0x0246
Version: 5.1.14 (0x051e)
16-bit Service UUIDs (complete): 2 entries
Generic Access Profile (0x1800)
Generic Attribute Profile (0x1801)
> HCI Event: Command Complete (0x0e) plen 4 [hci0] 7.863002
Write Extended Inquiry Response (0x03|0x0052) ncmd 1
Status: Success (0x00)
< HCI Command: Write Extended Inquiry.. (0x03|0x0052) plen 241 [hci0] 8.165743
FEC: Not required (0x00)
Name (complete): gowtham-ab-0
TX power: 4 dBm
Device ID: USB Implementer's Forum assigned (0x0002)
Vendor: Linux Foundation (0x1d6b)
Product: 0x0246
Version: 5.1.14 (0x051e)
16-bit Service UUIDs (complete): 3 entries
Generic Access Profile (0x1800)
Generic Attribute Profile (0x1801)
A/V Remote Control (0x110e)
> HCI Event: Command Complete (0x0e) plen 4 [hci0] 8.168976
Write Extended Inquiry Response (0x03|0x0052) ncmd 1
Status: Success (0x00)
< HCI Command: Write Extended Inquiry.. (0x03|0x0052) plen 241 [hci0] 8.180847
FEC: Not required (0x00)
Name (complete): gowtham-ab-0
TX power: 4 dBm
Device ID: USB Implementer's Forum assigned (0x0002)
Vendor: Linux Foundation (0x1d6b)
Product: 0x0246
Version: 5.1.14 (0x051e)
16-bit Service UUIDs (complete): 4 entries
Generic Access Profile (0x1800)
Generic Attribute Profile (0x1801)
A/V Remote Control (0x110e)
A/V Remote Control Target (0x110c)
> HCI Event: Command Complete (0x0e) plen 4 [hci0] 8.183971
Write Extended Inquiry Response (0x03|0x0052) ncmd 1
Status: Success (0x00)
@ Device Unblocked: 00:00:00:00:00:00 (0)
@ Device Added: CC:C3:EA:FF:E2:5F (0) 1
@ Device Added: 00:02:CA:C0:54:EF (0) 1
@ Device Added: 00:1A:7D:DA:71:13 (0) 1
@ Device Added: 00:1B:DC:07:33:4E (0) 1
< HCI Command: Write Scan Enable (0x03|0x001a) plen 1 [hci0] 8.203096
Scan enable: Page Scan (0x02)
> HCI Event: Command Complete (0x0e) plen 4 [hci0] 8.203973
Write Scan Enable (0x03|0x001a) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32 [hci0] 8.204000
Length: 3
TX power: 8 dBm
@ New Settings: 0x0ad1
powered bondable ssp br/edr le secure-conn
> HCI Event: Command Complete (0x0e) plen 4 [hci0] 8.218973
LE Set Advertising Data (0x08|0x0008) ncmd 1
Status: Success (0x00)
@ New Settings: 0x0ad3
powered connectable bondable ssp br/edr le secure-conn
< HCI Command: Write Current IAC LAP (0x03|0x003a) plen 4 [hci0] 8.247932
Number of IAC: 1
Access code: 0x9e8b33 (General Inquiry)
> HCI Event: Command Complete (0x0e) plen 4 [hci0] 8.248995
Write Current IAC LAP (0x03|0x003a) ncmd 1
Status: Success (0x00)
< HCI Command: Write Scan Enable (0x03|0x001a) plen 1 [hci0] 8.249021
Scan enable: Inquiry Scan + Page Scan (0x03)
> HCI Event: Command Complete (0x0e) plen 4 [hci0] 8.250973
Write Scan Enable (0x03|0x001a) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32 [hci0] 8.251005
Length: 6
Flags: 0x02
LE General Discoverable Mode
TX power: 8 dBm
> HCI Event: Command Complete (0x0e) plen 4 [hci0] 8.255980
LE Set Advertising Data (0x08|0x0008) ncmd 1
Status: Success (0x00)
@ New Settings: 0x0adb
powered connectable discoverable bondable ssp br/edr le secure-conn
< HCI Command: Create Connection (0x01|0x0005) plen 13 [hci0] 124.720498
Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)
Packet type: 0xcc18
DM1 may be used
DH1 may be used
DM3 may be used
DH3 may be used
DM5 may be used
DH5 may be used
Page scan repetition mode: R2 (0x02)
Page scan mode: Mandatory (0x00)
Clock offset: 0x0000
Role switch: Allow slave (0x01)
> HCI Event: Command Status (0x0f) plen 4 [hci0] 124.734081
Create Connection (0x01|0x0005) ncmd 1
Status: Success (0x00)
> HCI Event: Connect Complete (0x03) plen 11 [hci0] 127.725098
Status: Success (0x00)
Handle: 70
Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)
Link type: ACL (0x01)
Encryption: Disabled (0x00)
< HCI Command: Read Remote Supported... (0x01|0x001b) plen 2 [hci0] 127.725227
Handle: 70
> HCI Event: Command Status (0x0f) plen 4 [hci0] 127.730074
Read Remote Supported Features (0x01|0x001b) ncmd 0
Status: Success (0x00)
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 [hci0] 127.735080
Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)
Page scan repetition mode: R1 (0x01)
> HCI Event: Max Slots Change (0x1b) plen 3 [hci0] 127.738110
Handle: 70
Max slots: 5
> HCI Event: Command Status (0x0f) plen 4 [hci0] 127.751101
NOP (0x00|0x0000) ncmd 1
Status: Success (0x00)
> HCI Event: Read Remote Supported Features (0x0b) plen 11 [hci0] 127.758124
Status: Success (0x00)
Handle: 70
Features: 0xff 0xff 0x8f 0x7e 0xd8 0x1f 0x5b 0x87
3 slot packets
5 slot packets
Encryption
Slot offset
Timing accuracy
Role switch
Hold mode
Sniff mode
Park state
Power control requests
Channel quality driven data rate (CQDDR)
SCO link
HV2 packets
HV3 packets
u-law log synchronous data
A-law log synchronous data
CVSD synchronous data
Paging parameter negotiation
Power control
Transparent synchronous data
Broadcast Encryption
Enhanced Data Rate ACL 2 Mbps mode
Enhanced Data Rate ACL 3 Mbps mode
Enhanced inquiry scan
Interlaced inquiry scan
Interlaced page scan
RSSI with inquiry results
AFH capable slave
AFH classification slave
LE Supported (Controller)
3-slot Enhanced Data Rate ACL packets
5-slot Enhanced Data Rate ACL packets
Sniff subrating
Pause encryption
AFH capable master
AFH classification master
Extended Inquiry Response
Simultaneous LE and BR/EDR (Controller)
Secure Simple Pairing
Encapsulated PDU
Non-flushable Packet Boundary Flag
Link Supervision Timeout Changed Event
Inquiry TX Power Level
Enhanced Power Control
Extended features
< HCI Command: Read Remote Extended F.. (0x01|0x001c) plen 3 [hci0] 127.758157
Handle: 70
Page: 1
> HCI Event: Command Status (0x0f) plen 4 [hci0] 127.763096
Read Remote Extended Features (0x01|0x001c) ncmd 1
Status: Success (0x00)
> HCI Event: Read Remote Extended Features (0x23) plen 13 [hci0] 127.770079
Status: Success (0x00)
Handle: 70
Page: 1/1
Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Secure Simple Pairing (Host Support)
< HCI Command: Remote Name Request (0x01|0x0019) plen 10 [hci0] 127.770117
Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)
Page scan repetition mode: R2 (0x02)
Page scan mode: Mandatory (0x00)
Clock offset: 0x0000
> HCI Event: Command Status (0x0f) plen 4 [hci0] 127.776084
Remote Name Request (0x01|0x0019) ncmd 1
Status: Success (0x00)
> HCI Event: Remote Name Req Complete (0x07) plen 255 [hci0] 127.806077
Status: Success (0x00)
Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)
Name: PTS-BNEP-GOWTHAM-AB
< HCI Command: Authentication Requested (0x01|0x0011) plen 2 [hci0] 127.806149
Handle: 70
@ Device Connected: 00:1B:DC:07:33:4E (0) flags 0x0000
14 09 50 54 53 2d 42 4e 45 50 2d 47 4f 57 54 48 ..PTS-BNEP-GOWTH
41 4d 2d 41 42 AM-AB
> HCI Event: Command Status (0x0f) plen 4 [hci0] 127.808035
Authentication Requested (0x01|0x0011) ncmd 1
Status: Success (0x00)
> HCI Event: Link Key Request (0x17) plen 6 [hci0] 127.809039
Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)
< HCI Command: Link Key Request Negat.. (0x01|0x000c) plen 6 [hci0] 127.809070
Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)
> HCI Event: Command Complete (0x0e) plen 10 [hci0] 127.815041
Link Key Request Negative Reply (0x01|0x000c) ncmd 1
Status: Success (0x00)
Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)
> HCI Event: IO Capability Request (0x31) plen 6 [hci0] 127.816039
Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)
< HCI Command: IO Capability Request... (0x01|0x002b) plen 9 [hci0] 127.816068
Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)
IO capability: DisplayYesNo (0x01)
OOB data: Authentication data not present (0x00)
Authentication: General Bonding - MITM required (0x05)
> HCI Event: Command Complete (0x0e) plen 10 [hci0] 127.820040
IO Capability Request Reply (0x01|0x002b) ncmd 1
Status: Success (0x00)
Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)
> HCI Event: IO Capability Response (0x32) plen 9 [hci0] 127.842137
Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)
IO capability: DisplayYesNo (0x01)
OOB data: Authentication data not present (0x00)
Authentication: General Bonding - MITM not required (0x04)
> HCI Event: User Confirmation Request (0x33) plen 10 [hci0] 128.242120
Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)
Passkey: 564246
@ User Confirmation Request: 00:1B:DC:07:33:4E (0) hint 0 value 564246
> HCI Event: Simple Pairing Complete (0x36) plen 7 [hci0] 158.243129
Status: Authentication Failure (0x05)
Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.)
> HCI Event: Auth Complete (0x06) plen 3 [hci0] 158.244139
Status: Authentication Failure (0x05)
Handle: 70
@ Authentication Failed: 00:1B:DC:07:33:4E (0) status 0x05
< HCI Command: Read Clock Offset (0x01|0x001f) plen 2 [hci0] 158.270357
Handle: 70
> HCI Event: Command Status (0x0f) plen 4 [hci0] 158.272106
Read Clock Offset (0x01|0x001f) ncmd 1
Status: Success (0x00)
< HCI Command: Disconnect (0x01|0x0006) plen 3 [hci0] 158.272142
Handle: 70
Reason: Remote User Terminated Connection (0x13)
> HCI Event: Read Clock Offset Complete (0x1c) plen 5 [hci0] 158.277091
Status: Success (0x00)
Handle: 70
Clock offset: 0x1f88
> HCI Event: Command Status (0x0f) plen 4 [hci0] 158.278089
Disconnect (0x01|0x0006) ncmd 1
Status: Success (0x00)
> HCI Event: Disconnect Complete (0x05) plen 4 [hci0] 158.356112
Status: Success (0x00)
Handle: 70
Reason: Connection Terminated By Local Host (0x16)
@ Device Disconnected: 00:1B:DC:07:33:4E (0) reason 2
< HCI Command: Write Scan Enable (0x03|0x001a) plen 1 [hci0] 174.927620
Scan enable: No Scans (0x00)
> HCI Event: Command Complete (0x0e) plen 4 [hci0] 174.929118
Write Scan Enable (0x03|0x001a) ncmd 1
Status: Success (0x00)
@ Class of Device Changed: 0x000000
@ New Settings: 0x0ada
connectable discoverable bondable ssp br/edr le secure-conn
HCI sniffer - Bluetooth packet analyzer ver 5.30
device: hci0 snap_len: 1500 filter: 0xffffffffffffffff
< HCI Command: Write Extended Inquiry Response (0x03|0x0052) plen 241
fec 0x00
Complete local name: 'gowtham-ab-0'
TX power level: 4
Unknown type 0x10 with 8 bytes data
Complete service classes: 0x1800 0x1801
> HCI Event: Command Complete (0x0e) plen 4
Write Extended Inquiry Response (0x03|0x0052) ncmd 1
status 0x00
< HCI Command: Write Extended Inquiry Response (0x03|0x0052) plen 241
fec 0x00
Complete local name: 'gowtham-ab-0'
TX power level: 4
Unknown type 0x10 with 8 bytes data
Complete service classes: 0x1800 0x1801 0x110e
> HCI Event: Command Complete (0x0e) plen 4
Write Extended Inquiry Response (0x03|0x0052) ncmd 1
status 0x00
< HCI Command: Write Extended Inquiry Response (0x03|0x0052) plen 241
fec 0x00
Complete local name: 'gowtham-ab-0'
TX power level: 4
Unknown type 0x10 with 8 bytes data
Complete service classes: 0x1800 0x1801 0x110e 0x110c
> HCI Event: Command Complete (0x0e) plen 4
Write Extended Inquiry Response (0x03|0x0052) ncmd 1
status 0x00
< HCI Command: Write Scan Enable (0x03|0x001a) plen 1
enable 2
> HCI Event: Command Complete (0x0e) plen 4
Write Scan Enable (0x03|0x001a) ncmd 1
status 0x00
< HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32
> HCI Event: Command Complete (0x0e) plen 4
LE Set Advertising Data (0x08|0x0008) ncmd 1
status 0x00
< HCI Command: Write Current IAC LAP (0x03|0x003a) plen 4
IAC 0x9e8b33 (General Inquiry Access Code)
> HCI Event: Command Complete (0x0e) plen 4
Write Current IAC LAP (0x03|0x003a) ncmd 1
status 0x00
< HCI Command: Write Scan Enable (0x03|0x001a) plen 1
enable 3
> HCI Event: Command Complete (0x0e) plen 4
Write Scan Enable (0x03|0x001a) ncmd 1
status 0x00
< HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32
> HCI Event: Command Complete (0x0e) plen 4
LE Set Advertising Data (0x08|0x0008) ncmd 1
status 0x00
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:1B:DC:07:33:4E ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 70 bdaddr 00:1B:DC:07:33:4E type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 70
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
bdaddr 00:1B:DC:07:33:4E mode 1
> HCI Event: Max Slots Change (0x1b) plen 3
handle 70 slots 5
> HCI Event: Command Status (0x0f) plen 4
Unknown (0x00|0x0000) status 0x00 ncmd 1
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 70
Features: 0xff 0xff 0x8f 0x7e 0xd8 0x1f 0x5b 0x87
< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
handle 70 page 1
> HCI Event: Command Status (0x0f) plen 4
Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
> HCI Event: Read Remote Extended Features (0x23) plen 13
status 0x00 handle 70 page 1 max 1
Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:1B:DC:07:33:4E mode 2 clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:1B:DC:07:33:4E name 'PTS-BNEP-GOWTHAM-AB'
< HCI Command: Authentication Requested (0x01|0x0011) plen 2
handle 70
> HCI Event: Command Status (0x0f) plen 4
Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
> HCI Event: Link Key Request (0x17) plen 6
bdaddr 00:1B:DC:07:33:4E
< HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
bdaddr 00:1B:DC:07:33:4E
> HCI Event: Command Complete (0x0e) plen 10
Link Key Request Negative Reply (0x01|0x000c) ncmd 1
status 0x00 bdaddr 00:1B:DC:07:33:4E
> HCI Event: IO Capability Request (0x31) plen 6
bdaddr 00:1B:DC:07:33:4E
< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
bdaddr 00:1B:DC:07:33:4E capability 0x01 oob 0x00 auth 0x05
Capability: DisplayYesNo (OOB data not present)
Authentication: General Bonding (MITM Protection)
> HCI Event: Command Complete (0x0e) plen 10
IO Capability Request Reply (0x01|0x002b) ncmd 1
status 0x00 bdaddr 00:1B:DC:07:33:4E
> HCI Event: IO Capability Response (0x32) plen 9
bdaddr 00:1B:DC:07:33:4E capability 0x01 oob 0x00 auth 0x04
Capability: DisplayYesNo (OOB data not present)
Authentication: General Bonding (No MITM Protection)
> HCI Event: User Confirmation Request (0x33) plen 10
bdaddr 00:1B:DC:07:33:4E passkey 564246
> HCI Event: Simple Pairing Complete (0x36) plen 7
status 0x05 bdaddr 00:1B:DC:07:33:4E
Error: Authentication Failure
> HCI Event: Auth Complete (0x06) plen 3
status 0x05 handle 70
Error: Authentication Failure
< HCI Command: Read Clock Offset (0x01|0x001f) plen 2
handle 70
> HCI Event: Command Status (0x0f) plen 4
Read Clock Offset (0x01|0x001f) status 0x00 ncmd 1
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 70 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Read Clock Offset Complete (0x1c) plen 5
status 0x00 handle 70 clkoffset 0x1f88
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 70 reason 0x16
Reason: Connection Terminated by Local Host
< HCI Command: Write Scan Enable (0x03|0x001a) plen 1
enable 0
> HCI Event: Command Complete (0x0e) plen 4
Write Scan Enable (0x03|0x001a) ncmd 1
status 0x00
