From: Tedd Ho-Jeong An <tedd.an@xxxxxxxxx>
This patch fixes the command length alignment issue for Intel Bluetooth
8260.
The length of parameters in the firmware downloading command must be
multiplication of 4. If not, the command must append Intel_NOP command
with extra parameters, zeros, at the end and the firmware file is
already included Intel_NOP command for alignment.
This patch checks the length of the parameters and if it is not aligned,
then read the next command which is Intel_NOP command and append it to
the first read command and send to the device together.
For example, if the data from the firmware file is like this:
8E FC 03 11 22 33 02 FC 03 00 00 00
Previously, btusb sends two commands:
09 FC 06 8E FC 03 11 22 33
09 FC 06 02 FC 03 00 00 00
This will not work due to the length of parameters are 6 and the device
failed to align the data.
This patch will append them together and send one command:
09 FC 0B 8E FC 03 11 22 33 02 FC 03 00 00 00
Signed-off-by: Tedd Ho-Jeong An <tedd.an@xxxxxxxxx>
---
drivers/bluetooth/btusb.c | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index d21f3b4..57f4eac 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2541,6 +2541,41 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
cmd_len = sizeof(*cmd) + cmd->plen;
+ /* The parameter length of secure send command should be a
+ * multiplication of 4. If it is not, it appends Intel_NOP
+ * command with arbitrary number of parameters (zeros) to meet
+ * the 4 byte alignment.
+ * The FW file has already aligned and appended Intel_NOP
+ * command. So it needs to read next Intel_NOP command and send
+ * them together.
+ */
+ if ((cmd_len % 4) != 0) {
+ /* Make sure the next command is Intel_NOP command.
+ */
+ struct hci_command_hdr *nop_cmd =
+ (void *)(fw_ptr + cmd_len);
+ if (nop_cmd->opcode != 0xfc02) {
+ BT_ERR("%s: Intel_NOP command is missing",
+ hdev->name);
+ err = -EBADF;
+ goto done;
+ }
+
+ /* Command data is updated to include NOP command
+ */
+ cmd_len += sizeof(*nop_cmd) + nop_cmd->plen;
+
+ /* Make sure the total length is aligned and smaller
+ * than maximum param length
+ */
+ if ((cmd_len % 4) != 0 || cmd_len > 252) {
+ BT_ERR("%s: 4 byte alignment failed",
+ hdev->name);
+ err = -EBADF;
+ goto done;
+ }
+ }
+
/* Send each command from the firmware data buffer as
* a single Data fragment.
*/
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
