Marcel Holtmann <marcel@xxxxxxxxxxxx> writes: > Hi Randy, > >> we are building a custom board using the TI AM335x ARM processor and >> want to base it on the armhf port of debian linux. >> >> to save cost/power/etc), our system will not have a usb bridge, so the >> usual method of adding a bluetooth device via plugging it into a usb >> port will not be used. >> >> is it possible to configure bluez and/or the kernel to recognize and use >> a BT module (an LSR TiWi-uB2) that has its HCI serial interface >> hard-wired to a specific serial port / uart on the ARM? > > you are looking for hciattach or btattach tool to attach a serial port to the kernel. > >> also, is the LSR TiWi-uB2 known to operate with bluez correctly? > > No idea. Nobody ever send me board and enough instructions to test this all. There is TI support in hciattach. So at least there is a starting point if it does not work out of the box. Aha! Excellent! Thank you, Marcel. -- Randy Yates Digital Signal Labs http://www.digitalsignallabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
