Hi Grzegorz,
On Thursday 12 March 2015 18:07:32 Grzegorz Kolodziejczyk wrote:
> This patch adds general functionality of bnep connect and listen.
> ---
> tools/bneptest.c | 711
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 707
> insertions(+), 4 deletions(-)
>
> diff --git a/tools/bneptest.c b/tools/bneptest.c
> index 619427b..b694055 100644
> --- a/tools/bneptest.c
> +++ b/tools/bneptest.c
> @@ -26,33 +26,570 @@
> #endif
>
> #include <stdio.h>
> +#include <signal.h>
> #include <stdlib.h>
> #include <getopt.h>
> +#include <stdbool.h>
> +#include <errno.h>
> +#include <unistd.h>
> +#include <sys/ioctl.h>
> +#include <net/if.h>
> +#include <linux/sockios.h>
> +#include <netinet/in.h>
> +#include <linux/if_bridge.h>
> +
> +#include <bluetooth/bluetooth.h>
> +#include <bluetooth/hci.h>
> +#include <bluetooth/hci_lib.h>
>
> #include <glib.h>
>
> #include "src/log.h"
> +#include "btio/btio.h"
> +#include "lib/bnep.h"
> +#include "profiles/network/bnep.h"
> +
> +enum {
> + MODE_NONE,
> + MODE_CONNECT,
> + MODE_LISTEN,
just connect/listen mode should be enough
> +};
>
> static GMainLoop *mloop;
> +static GIOChannel *bnep_io;
> +
> +static int mode;
> +static bool no_close_after_disconn;
> +static int send_frame_timeout;
> +
> +static bdaddr_t src_addr, dst_addr;
> +static char iface[16];
> +static char bridge[16];
> +static bool send_ctrl_msg_type_set;
> +static uint8_t ctrl_msg_type;
> +static bool send_bnep_msg_type_set;
> +static uint8_t bnep_msg_type;
> +static int ctrl_msg_retransmition_nb;
> +static int bnep_msg_retransmission_nb;
> +static uint16_t local_role = BNEP_SVC_PANU;
> +static uint16_t remote_role = BNEP_SVC_NAP;
> +static uint16_t ntw_proto_down_range;
> +static uint16_t ntw_proto_up_range = 0xdc05;
> +static uint16_t ntw_proto_type;
> +static uint8_t mcast_addr_down_range[6];
> +static uint8_t mcast_addr_up_range[6] = { 0xff, 0xff, 0xff, 0xff, 0xff,
> 0xff }; +static uint8_t src_hw_addr[6];
> +static uint8_t dst_hw_addr[6];
> +static uint8_t general_frame_payload[] = "abcdef0123456789_bnep_test_data";
> +static struct bnep *session;
statics should be explicitly initialized to zero/null as well (not really
needed but we have this convention in userspace code).
> +
> +
> +static int set_forward_delay(int sk)
> +{
> + unsigned long args[4] = { BRCTL_SET_BRIDGE_FORWARD_DELAY, 0, 0, 0 };
> + struct ifreq ifr;
> +
> + memset(&ifr, 0, sizeof(ifr));
> + strncpy(ifr.ifr_name, bridge, IFNAMSIZ);
> + ifr.ifr_data = (char *) args;
> +
> + if (ioctl(sk, SIOCDEVPRIVATE, &ifr) < 0) {
> + error("setting forward delay failed: %d (%s)",
> + errno, strerror(errno));
> + return -1;
> + }
> +
> + return 0;
> +}
> +
> +static int nap_create_bridge(void)
> +{
> + int sk, err;
> +
> + sk = socket(AF_INET, SOCK_STREAM | SOCK_CLOEXEC, 0);
> + if (sk < 0)
> + return -EOPNOTSUPP;
> +
> + if (ioctl(sk, SIOCBRADDBR, bridge) < 0) {
> + err = -errno;
> + if (err != -EEXIST) {
just check errno here.
> + close(sk);
> + return -EOPNOTSUPP;
> + }
> + }
> +
> + err = set_forward_delay(sk);
> + if (err < 0) {
> + printf("failed to set forward delay\n");
> + ioctl(sk, SIOCBRDELBR, bridge);
> + }
> +
> + close(sk);
> +
> + return err;
> +}
> +
> +static int cleanup(void)
> +{
> + bnep_cleanup();
> +
> + if (mode == MODE_LISTEN)
> + bnep_server_delete(bridge, iface, &dst_addr);
> +
> + if (bnep_io) {
> + g_io_channel_shutdown(bnep_io, TRUE, NULL);
> + g_io_channel_unref(bnep_io);
bnep_io = NULL here to avoid dangling pointer.
> + }
> +
> + return 0;
> +}
> +
> +static gboolean bnep_watchdog_cb(GIOChannel *chan, GIOCondition cond,
> + gpointer user_data)
> +{
> + printf("%s\n", __func__);
> +
> + if (no_close_after_disconn)
> + return FALSE;
> +
> + /* Cleanup since it's called when disconnected l2cap */
> + if (cleanup() < 0) {
> + printf("cleanup went wrong...\n");
> + return FALSE;
> + }
> +
> + g_main_loop_quit(mloop);
> + return FALSE;
> +}
> +
> +static ssize_t send_compressed_frame(int sk, uint8_t type)
> +{
> + uint8_t frame[100];
> +
> + printf("%s\n", __func__);
> +
> + if (send_frame_timeout > 0) {
> + printf("waiting %d seconds before sending msg\n",
> + send_frame_timeout);
> + sleep(send_frame_timeout);
> + }
> +
> + frame[0] = type;
> + memcpy(&frame[1], dst_hw_addr, sizeof(dst_hw_addr));
> + memcpy(&frame[7], src_hw_addr, sizeof(src_hw_addr));
> + frame[13] = ntw_proto_type & 0xff;
> + frame[14] = (ntw_proto_type >> 8);
> + memcpy(&frame[15], general_frame_payload,
> + sizeof(general_frame_payload));
> +
> + /* TODO - set frame payload by user */
> + return send(sk, frame, 15 + sizeof(general_frame_payload), 0);
> +}
> +
> +static ssize_t send_general_frame(int sk)
> +{
> + uint8_t frame[100];
> +
> + printf("%s\n", __func__);
> +
> + if (send_frame_timeout > 0) {
> + printf("waiting %d seconds before sending msg\n",
> + send_frame_timeout);
> + sleep(send_frame_timeout);
> + }
> +
> + frame[0] = BNEP_GENERAL;
> + memcpy(&frame[1], dst_hw_addr, sizeof(dst_hw_addr));
> + memcpy(&frame[7], src_hw_addr, sizeof(src_hw_addr));
> + frame[13] = ntw_proto_type & 0xff;
> + frame[14] = (ntw_proto_type >> 8);
> + memcpy(&frame[15], general_frame_payload,
> + sizeof(general_frame_payload));
> +
> + /* TODO - set frame payload by user */
> + return send(sk, frame, 15 + sizeof(general_frame_payload), 0);
> +}
> +
> +static ssize_t send_ctrl_frame(int sk)
> +{
> + /* Max buff size = type(1byte) + ctrl(1byte) + len(2byte) +
> + * mcast_addr_down(6byte) + mcast_addr_up(6byte) */
/*
* foo
* bar
*/
> + uint8_t buff[16];
> + int err;
> +
> + printf("%s\n", __func__);
> +
> + if (send_frame_timeout > 0) {
> + printf("waiting %d seconds before sending msg\n",
> + send_frame_timeout);
> + sleep(send_frame_timeout);
> + }
> +
> + switch (ctrl_msg_type) {
> + case BNEP_FILTER_NET_TYPE_SET: {
> + struct bnep_set_filter_req *frame = (void *)buff;
just move struct bnep_set_filter_req *frame = (void *)buff;
to the top of function. Also there should be space after (void *)
> +
> + frame->type = BNEP_CONTROL;
> + frame->ctrl = ctrl_msg_type;
> + frame->len = htons(sizeof(ntw_proto_down_range) +
> + sizeof(ntw_proto_up_range));
> + memcpy(frame->list, &ntw_proto_down_range,
> + sizeof(ntw_proto_down_range));
> + memcpy(frame->list + sizeof(ntw_proto_down_range),
> + &ntw_proto_up_range, sizeof(ntw_proto_up_range));
> +
> + err = send(sk, frame, sizeof(*frame) +
> + sizeof(ntw_proto_down_range) +
> + sizeof(ntw_proto_up_range), 0);
> +
> + break;
> +
> + }
> + case BNEP_FILTER_MULT_ADDR_SET: {
> + struct bnep_set_filter_req *frame = (void *)buff;
> +
> + frame->type = BNEP_CONTROL;
> + frame->ctrl = ctrl_msg_type;
> + frame->len = htons(sizeof(mcast_addr_down_range) +
> + sizeof(mcast_addr_up_range));
> + memcpy(frame->list, mcast_addr_down_range,
> + sizeof(mcast_addr_down_range));
> + memcpy(frame->list + sizeof(mcast_addr_down_range),
> + mcast_addr_up_range, sizeof(mcast_addr_up_range));
> +
> + err = send(sk, frame, sizeof(*frame) +
> + sizeof(mcast_addr_down_range) +
> + sizeof(mcast_addr_up_range), 0);
> +
> + break;
> +
> + }
> + default:
> + err = -1;
> + }
> +
> + return err;
> +}
> +
> +static int send_bnep_frame(int sk)
> +{
> + int err = 0;
just set err in default case.
> +
> + switch (bnep_msg_type) {
> + case BNEP_GENERAL:
> + err = send_general_frame(sk);
> +
those empty lines are not needed.
> + break;
> +
> + case BNEP_COMPRESSED:
> + err = send_compressed_frame(sk, BNEP_COMPRESSED);
> +
> + break;
> +
> + case BNEP_COMPRESSED_SRC_ONLY:
> + err = send_compressed_frame(sk,
> + BNEP_COMPRESSED_SRC_ONLY);
> +
> + break;
> +
> + case BNEP_COMPRESSED_DST_ONLY:
> + err = send_compressed_frame(sk,
> + BNEP_COMPRESSED_DST_ONLY);
> +
> + break;
> +
> + default:
> + printf("wrong bnep_msg_type 0x%02x\n", bnep_msg_type);
> + }
> +
> + return err;
> +}
> +
> +static void handle_bnep_msg_send(int sk)
> +{
> + if (send_ctrl_msg_type_set) {
> + do {
> + if (send_ctrl_frame(sk) < 0)
> + printf("sending ctrl frame error: %s (%d)\n",
> + strerror(errno), errno);
> + } while (!ctrl_msg_retransmition_nb--);
This ! seems bogus.
> + }
> +
> + if (send_bnep_msg_type_set) {
> + do {
> + if (send_bnep_frame(sk) < 0)
> + printf("sending bnep frame error: %s (%d)\n",
> + strerror(errno), errno);
> + } while (!bnep_msg_retransmission_nb--);
ditto.
> + }
> +}
> +
> +static gboolean setup_bnep_cb(GIOChannel *chan, GIOCondition cond,
> + gpointer user_data)
> +{
> + uint8_t packet[BNEP_MTU];
> + int sk, n, err;
> +
> + printf("%s\n", __func__);
> +
> + if (cond & (G_IO_ERR | G_IO_HUP | G_IO_NVAL)) {
> + error("hangup or error or inval on BNEP socket");
> + return FALSE;
> + }
> +
> + sk = g_io_channel_unix_get_fd(chan);
> +
> + /* Reading BNEP_SETUP_CONNECTION_REQUEST_MSG */
> + n = read(sk, packet, sizeof(packet));
> + if (n < 0) {
double space before <
> + error("read(): %s(%d)", strerror(errno), errno);
> + return FALSE;
> + }
> +
> + err = nap_create_bridge();
> + if (err < 0) {
> + error("failed to create bridge: %s (%d)", strerror(-err), err);
> + return FALSE;
> + }
> +
> + if (bnep_server_add(sk, (err < 0) ? NULL : bridge, iface, &dst_addr,
> + packet, n) < 0) {
> + printf("server_connadd failed\n");
> + cleanup();
> + return FALSE;
> + }
> +
> + g_io_add_watch(chan, G_IO_HUP | G_IO_ERR | G_IO_NVAL, bnep_watchdog_cb,
> + NULL);
> +
> + handle_bnep_msg_send(sk);
> +
> + g_io_channel_unref(bnep_io);
> + bnep_io = NULL;
> +
> + return FALSE;
> +}
> +
> +static void connect_cb(GIOChannel *chan, GError *err, gpointer user_data)
> +{
> + printf("%s\n", __func__);
> +
> + if (err) {
> + error("%s", err->message);
> + return;
> + }
> +
> + g_io_add_watch(chan, G_IO_IN | G_IO_HUP | G_IO_ERR | G_IO_NVAL,
> + setup_bnep_cb, NULL);
> +}
> +
> +static void connected_client_cb(char *iface, int err, void *data)
> +{
> + int sk = *((int *)data);
Use PTR_TO_INT macro instead.
> +
> + printf("%s\n", __func__);
> +
> + free(data);
> +
> + handle_bnep_msg_send(sk);
> +}
> +
> +static void disconnected_client_cb(void *data)
> +{
> + printf("%s\n", __func__);
> +
> + if (no_close_after_disconn)
> + return;
> +
> + /* Cleanup since it's called when disconnected l2cap */
> + if (cleanup() < 0) {
> + printf("cleanup went wrong...\n");
> + return;
> + }
> +
> + g_main_loop_quit(mloop);
> +}
> +
> +static void connect_client_cb(GIOChannel *chan, GError *err, gpointer
> user_data) +{
> + int perr;
> + int *sk;
> +
> + sk = malloc(sizeof(*sk));
just use INT_TO_PTR to pass this as userdata.
> +
> + *sk = g_io_channel_unix_get_fd(bnep_io);
> +
> + session = bnep_new(*sk, local_role, remote_role, bridge);
> + if (!session) {
> + printf("cannot create bnep session\n");
> + free(sk);
> + return;
> + }
> +
> + perr = bnep_connect(session, connected_client_cb,
> + disconnected_client_cb, sk, NULL);
> + if (perr < 0)
> + printf("cannot initiate bnep connection\n");
> +}
> +
> +static void confirm_cb(GIOChannel *chan, gpointer data)
> +{
> + GError *err = NULL;
> + char address[18];
> +
> + printf("%s\n", __func__);
> +
> + bt_io_get(chan, &err, BT_IO_OPT_DEST_BDADDR, &dst_addr, BT_IO_OPT_DEST,
> + address, BT_IO_OPT_INVALID);
> + if (err) {
> + error("%s", err->message);
> + g_error_free(err);
> + return;
> + }
> +
> + printf("incoming connection from: %s\n", address);
> +
> + bnep_io = g_io_channel_ref(chan);
> + g_io_channel_set_close_on_unref(bnep_io, TRUE);
> +
> + if (!bt_io_accept(bnep_io, connect_cb, NULL, NULL, &err)) {
> + error("bt_io_accept: %s", err->message);
> + g_error_free(err);
missing bnep_io unref?
> + }
or you can just return on error and ref bnep_io here ?
> +}
> +
> +static int bnep_server_listen(void)
> +{
> + GError *gerr = NULL;
> +
> + printf("%s\n", __func__);
> +
> + bnep_io = bt_io_listen(NULL, confirm_cb, NULL, NULL, &gerr,
> + BT_IO_OPT_SOURCE_BDADDR, &src_addr,
> + BT_IO_OPT_PSM, BNEP_PSM,
> + BT_IO_OPT_SEC_LEVEL, BT_IO_SEC_LOW,
> + BT_IO_OPT_OMTU, BNEP_MTU,
> + BT_IO_OPT_IMTU, BNEP_MTU,
> + BT_IO_OPT_INVALID);
> +
> + if (!bnep_io) {
> + printf("can't start server listening: err %s\n", gerr->message);
> + g_error_free(gerr);
> + return -1;
> + }
> +
> + return 0;
> +}
> +
> +static int bnep_client_connect(void)
> +{
> + GError *gerr = NULL;
> + char *dst_addr_str = batostr(&dst_addr);
use ba2str and stack variable.
> +
> + printf("%s\n", __func__);
> +
> + printf("connecting %s\n", dst_addr_str);
> + free(dst_addr_str);
> +
> + bnep_io = bt_io_connect(connect_client_cb, NULL, NULL, &gerr,
> + BT_IO_OPT_SOURCE_BDADDR, &src_addr,
> + BT_IO_OPT_DEST_BDADDR, &dst_addr,
> + BT_IO_OPT_PSM, BNEP_PSM,
> + BT_IO_OPT_SEC_LEVEL, BT_IO_SEC_MEDIUM,
> + BT_IO_OPT_OMTU, BNEP_MTU,
> + BT_IO_OPT_IMTU, BNEP_MTU,
> + BT_IO_OPT_INVALID);
> +
> + if (!bnep_io) {
> + printf("cannot connect: err %s\n", gerr->message);
> + g_error_free(gerr);
> + return -1;
> + }
> +
> + return 0;
> +}
> +
> +static void exit_handler(int sig)
> +{
> + printf("got sig = %d, cleaning up...\n", sig);
> +
> + if (cleanup() < 0)
> + printf("cleanup failure...\n");
> + else
> + printf("cleanup successful - exit\n");
> +
> + exit(0);
> +}
>
> static void usage(void)
> {
> printf("bneptest - BNEP testing ver %s\n", VERSION);
> printf("Usage:\n"
> - "\tbneptest [options]\n");
> + "\tbneptest [-i] -b <bridge name> -n <iface name>"
> + " <connection mode> [send_ctrl_cmd] [options]\n"
> + "\t-i hci dev number <hci number>, def. 0\n"
> + "\t-b bridge name <string>\n"
> + "\t-n interface name <string>\n");
> + printf("Connect Mode:\n"
> + "\t-c connect <dst_addr>\n"
> + "\t-r remote role <16 bit svc value>\n"
> + "\t-l local role <16 bit svc valu>\n");
> + printf("Listen Mode:\n"
> + "\t-s start server listening\n");
> + printf("Send control command:\n"
> + "\t-t send message type <control msg type>, def. 0\n"
> + "\t-e start network protocol type range <16 bit val>, def. 0\n"
> + "\t-d end network protocol type range <16 bit val>, def. 1500\n"
> + "\t-g start multicast addr range <xx:xx:xx:xx:xx:xx>, def. 0\n"
> + "\t-j end multicast addr range <xx:xx:xx:xx:xx:xx>, def. f\n"
> + "\t-y number of ctrl frame retransmission <integer>, def. 0\n"
> + "\t-u number of bnep frame retransmission <integer>, def. 0\n");
> + printf("Send bnep generic frame:\n"
> + "\t-w send bnep generic frame <bnep generic type>, def. 0\n"
> + "\t-k set src mac addr <xx:xx:xx:xx:xx:xx>, def. 0\n"
> + "\t-f set dst mac addr <xx:xx:xx:xx:xx:xx>, def. 0\n");
> + printf("Options:\n"
> + "\t-T send message timeout after setup <seconds>\n"
> + "\t-N don't close bneptest after disconnect\n");
> }
>
> static struct option main_options[] = {
> - { "help", 0, 0, 'h' },
> + { "device", 1, 0, 'i' },
> + { "listen", 0, 0, 's' },
> + { "connect", 1, 0, 'c' },
> + { "snd_ctrl_msg_type", 1, 0, 't' },
> + { "snd_bnep_msg_type", 1, 0, 'w' },
> + { "src_hw_addr", 1, 0, 'k' },
> + { "dst_hw_addr", 1, 0, 'f' },
> + { "send_timeout", 1, 0, 'T' },
> + { "ntw_proto_down_range", 1, 0, 'd' },
> + { "ntw_proto_up_range", 1, 0, 'e' },
> + { "mcast_addr_down_range", 1, 0, 'g' },
> + { "mcast_addr_up_range", 1, 0, 'j' },
> + { "local_role", 1, 0, 'l' },
> + { "remote_role", 1, 0, 'r' },
> + { "bridge name", 1, 0, 'b' },
> + { "iface name", 1, 0, 'n' },
> + { "no_close", 0, 0, 'N' },
> + { "retrans_ctrl_nb", 0, 0, 'y' },
> + { "retrans_bnep_nb", 0, 0, 'u' },
> + { "help", 0, 0, 'h' },
> { 0, 0, 0, 0 }
> };
>
> int main(int argc, char *argv[])
> {
> int opt;
> + int err;
> + bool is_set_b_name = false, is_set_i_name = false;
>
> DBG("");
>
> + signal(SIGINT, exit_handler);
> +
> + hci_devba(0, &src_addr);
> + bacpy(&src_addr, BDADDR_ANY);
> +
> mloop = g_main_loop_new(NULL, FALSE);
> if (!mloop) {
> printf("cannot create main loop\n");
> @@ -60,9 +597,133 @@ int main(int argc, char *argv[])
> exit(1);
> }
>
> - while ((opt = getopt_long(argc, argv, "h", main_options, NULL))
> - != EOF) {
> + while ((opt = getopt_long(argc, argv,
> + "+i:c:b:n:t:T:d:e:g:j:k:f:w:l:r:y:u:Nsh",
> + main_options, NULL)) != EOF) {
> switch (opt) {
> + case 'i':
> + if (!strncmp(optarg, "hci", 3))
> + hci_devba(atoi(optarg + 3), &src_addr);
> + else
> + str2ba(optarg, &src_addr);
> +
> + break;
> +
Those empty lines are not needed.
> + case 's':
> + mode = MODE_LISTEN;
> + break;
> +
> + case 'c':
> + str2ba(optarg, &dst_addr);
> + mode = MODE_CONNECT;
> +
> + break;
> +
> + case 't':
> + send_ctrl_msg_type_set = true;
> + ctrl_msg_type = atoi(optarg);
> +
> + break;
> +
> + case 'w':
> + send_bnep_msg_type_set = true;
> + bnep_msg_type = atoi(optarg);
> +
> + break;
> +
> + case 'k': {
> + int i = 0;
declare it at the top
> +
> + for (; i <= 5; i++, optarg += 3)
initialize i in for loop.
for (i = 0; ...)
> + src_hw_addr[i] = strtol(optarg, NULL, 16);
> +
> + break;
> + }
> +
> + case 'f': {
> + int i = 0;
ditto.
> +
> + for (; i <= 5; i++, optarg += 3)
> + dst_hw_addr[i] = strtol(optarg, NULL, 16);
> +
> + break;
> + }
> +
> + case 'T':
> + send_frame_timeout = atoi(optarg);
> +
> + break;
> +
> + case 'd':
> + ntw_proto_down_range = htons(atoi(optarg));
> +
> + break;
> +
> + case 'e':
> + ntw_proto_up_range = htons(atoi(optarg));
> +
> + break;
> +
> + case 'g': {
> + int i = 0;
> +
ditto.
> + for (i = 5; i >= 0; i--, optarg += 3)
> + mcast_addr_down_range[i] =
> + strtol(optarg, NULL, 16);
> +
> + break;
> + }
> +
> + case 'j': {
> + int i = 0;
ditto.
> +
> + for (i = 5; i >= 0; i--, optarg += 3)
> + mcast_addr_up_range[i] =
> + strtol(optarg, NULL, 16);
> +
> + break;
> + }
> +
> + case 'l':
> + local_role = atoi(optarg);
> +
> + break;
> +
> + case 'r':
> + remote_role = atoi(optarg);
> +
> + break;
> +
> + case 'b':
> + strncpy(bridge, optarg, 16);
> + bridge[15] = '\0';
> + is_set_b_name = true;
> +
> + break;
> +
> + case 'n':
> + strncpy(iface, optarg, 14);
> + strcat(iface, "\%d");
> + iface[15] = '\0';
> + is_set_i_name = true;
> +
> + break;
> +
> + case 'N':
> + no_close_after_disconn = true;
> +
> + break;
> +
> + case 'y':
> + ctrl_msg_retransmition_nb = atoi(optarg);
> +
> + break;
> +
> + case 'u':
> + bnep_msg_retransmission_nb = atoi(optarg);
> +
> + break;
> +
> case 'h':
> default:
> usage();
> @@ -70,5 +731,47 @@ int main(int argc, char *argv[])
> }
> }
>
> + if (!is_set_b_name || !is_set_i_name) {
> + printf("bridge, interface name must be set!\n");
> + exit(1);
> + }
> +
> + switch (mode) {
> + case MODE_CONNECT:
> + err = bnep_init();
> + if (err < 0) {
> + printf("cannot initialize bnep\n");
> + exit(1);
> + }
> + err = bnep_client_connect();
> + if (err < 0)
> + exit(1);
> +
> + break;
> +
> + case MODE_LISTEN:
> + err = bnep_init();
> + if (err < 0) {
> + printf("cannot initialize bnep\n");
> + exit(1);
> + }
> + err = bnep_server_listen();
> + if (err < 0)
> + exit(1);
> +
> + break;
> +
> + case MODE_NONE:
> + default:
> + printf("connect/listen mode not set, exit...\n");
> + exit(1);
> + }
> +
> + g_main_loop_run(mloop);
> +
> + printf("Done\n");
> +
> + g_main_loop_unref(mloop);
> +
> return 0;
> }
--
Szymon K. Janc
szymon.janc@xxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
