Hi Alexander, > Add 04f2:aff1 to ath3k.c supported devices list and btusb.c blacklist, so that the device can load the ath3k firmware and re-enumerate itself as an AR3011 device. > > > T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=04f2 ProdID=aff1 Rev= 0.01 > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > > > Signed-off-by: Alexander Ploumistos <alexpl@xxxxxxxxxxxxxxxxx> > --- > drivers/bluetooth/ath3k.c | 1 + > drivers/bluetooth/btusb.c | 1 + > 2 files changed, 2 insertions(+) patch has been applied to bluetooth-next tree. However I had to reformat the From: line, the subject and the commit message. Please make sure that these are following in the rules for patches. Otherwise applying a patch turns into a lot of work for maintainer. Regards Marcel -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
