Hi Rick,
> Please add upstream to support the sub BT chip on the combo card...
>
> From e5ba79b482a755f0068bd502dad0ef1492ac4c8d Mon Sep 17 00:00:00 2001
> From: Rick Dunn <rick@xxxxxxxxxxxx>
> Date: Thu, 15 Jan 2015 13:00:19 -0500
> Subject: [PATCH] Add 0b05:17cf line for BCM4352 combo card BCM20702A0 chip
>
> ---
> drivers/bluetooth/btusb.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index af122e2..0725003 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -107,6 +107,7 @@ static const struct usb_device_id btusb_table[] = {
> { USB_DEVICE(0x0b05, 0x17cb) },
> { USB_DEVICE(0x04ca, 0x2003) },
> { USB_DEVICE(0x0489, 0xe042) },
> + { USB_DEVICE(0x0b05, 0x17cf), .driver_info = BTUSB_BCM_PATCHRAM },
> { USB_DEVICE(0x13d3, 0x3388), .driver_info = BTUSB_BCM_PATCHRAM },
> { USB_DEVICE(0x13d3, 0x3389), .driver_info = BTUSB_BCM_PATCHRAM },
> { USB_DEVICE(0x413c, 0x8197), .driver_info = BTUSB_BCM_PATCHRAM },
> --
> 1.9.1
>
> /sys/kernel/debug/usb/devices
> T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#= 5 Spd=12 MxCh= 0
> D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0b05 ProdID=17cf Rev= 1.12
> S: Manufacturer=Broadcom Corp
> S: Product=BCM20702A0
> S: SerialNumber=54271E3298CD
> C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
> E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
> I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
>
>
> Firmware is extracted from the latest Broadcom BCM4352 WIndows driver
> by extracting the zip and searching the .hex file names for '17cf' ..
> the hex file must then be converted to hcd format using the hex2hcd
> git below and named fw-0b05_17cf.hcd fw file moved to
> /lib/firmware/fw-0b05_17cf.hcd
>
> git clone https://github.com/jessesung/hex2hcd.git
this information needs to be in the commit message. Including a Signed-off-by which git commit will automatically add unless instructed not to.
And no need to mention that tool. BlueZ contains a version of that actually.
Also there is a generic entry for ASUSTek devices. Just add the patchram entry to that one.
/* ASUSTek Computer - Broadcom based */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01) },
Most importantly however, use git format-patch and git send-email. Since you mail client screwed up this one. It can not be applied.
Regards
Marcel
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
