Hi!
Major problem with Nokia H4P driver was, that it uses custom functions
instead of __hci_cmd_sync().
To recap, code was something like this: (You can see ifdefs with old
code and my new replacements).
....
len = sizeof(*neg_cmd) + sizeof(*neg_hdr) + H4_TYPE_SIZE;
#undef OLD
#ifdef OLD
skb = bt_skb_alloc(len, GFP_KERNEL);
if (!skb)
return -ENOMEM;
memset(skb->data, 0x00, len);
*skb_put(skb, 1) = H4_NEG_PKT;
neg_hdr = (struct hci_h4p_neg_hdr *)skb_put(skb, sizeof(*neg_hdr));
neg_cmd = (struct hci_h4p_neg_cmd *)skb_put(skb, sizeof(*neg_cmd));
neg_hdr->dlen = sizeof(*neg_cmd);
#else
struct {
struct hci_h4p_neg_cmd neg_cmd;
} data;
memset(&data, 0, len-1);
neg_cmd = &data.neg_cmd;
#endif
neg_cmd->ack = H4P_NEG_REQ;
neg_cmd->baud = cpu_to_le16(BT_BAUDRATE_DIVIDER/MAX_BAUD_RATE);
neg_cmd->proto = H4P_PROTO_BYTE;
neg_cmd->sys_clk = cpu_to_le16(sysclk);
hci_h4p_change_speed(info, INIT_SPEED);
printk("Setting up packet\n");
hci_h4p_set_rts(info, 1);
info->init_error = 0;
init_completion(&info->init_completion);
printk("skb_queue_tail\n");
#ifdef OLD
skb_queue_tail(&info->txq, skb);
spin_lock_irqsave(&info->lock, flags);
hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) |
UART_IER_THRI);
spin_unlock_irqrestore(&info->lock, flags);
#else
printk("hci_cmd_sync\n");
// set_bit(HCI_RUNNING, &info->hdev->flags);
info->initing = 2;
skb = __hci_cmd_sync(info->hdev, H4_NEG_PKT << 8, sizeof(*neg_cmd), ((void *) &data), 20);
...but there's problem with __hci_cmd_sync(): the packet it produces
is one byte too long; for initialization, I can work around that with
<< 8, so the added zero is at the begining (and device will be still
initialized), but that is a) an extreme hack, b) only works for first
packet and c) means that __hci_cmd_sync() will not recognize the
reply, meaning it does not really help.
Are there different variants of the protocol I should switch to? Any
ideas? Should I forget about __hci_cmd_sync()?
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
