Hi Luiz, > -----Original Message----- > From: linux-bluetooth-owner@xxxxxxxxxxxxxxx [mailto:linux-bluetooth- > owner@xxxxxxxxxxxxxxx] On Behalf Of Luiz Augusto von Dentz > Sent: Friday, December 05, 2014 6:38 PM > To: Gowtham Anandha Babu > Cc: Szymon Janc; linux-bluetooth@xxxxxxxxxxxxxxx; Dmitry Kasatkin; Bharat > Panda; cpgs@xxxxxxxxxxx > Subject: Re: [PATCH v1 2/5] monitor/rfcomm: Add support for RPN frame > decoding > > Hi Gowtham, > > On Fri, Dec 5, 2014 at 3:04 PM, Gowtham Anandha Babu > <gowtham.ab@xxxxxxxxxxx> wrote: > > Hi Luiz, > > > >> -----Original Message----- > >> From: linux-bluetooth-owner@xxxxxxxxxxxxxxx [mailto:linux-bluetooth- > >> owner@xxxxxxxxxxxxxxx] On Behalf Of Luiz Augusto von Dentz > >> Sent: Friday, December 05, 2014 5:18 PM > >> To: Gowtham Anandha Babu > >> Cc: Szymon Janc; linux-bluetooth@xxxxxxxxxxxxxxx; Dmitry Kasatkin; > >> Bharat Panda; cpgs@xxxxxxxxxxx > >> Subject: Re: [PATCH v1 2/5] monitor/rfcomm: Add support for RPN frame > >> decoding > >> > >> Hi Gowtham, > >> > >> On Fri, Dec 5, 2014 at 1:10 PM, Gowtham Anandha Babu > >> <gowtham.ab@xxxxxxxxxxx> wrote: > >> > Hi Szymon, > >> > > >> >> -----Original Message----- > >> >> From: linux-bluetooth-owner@xxxxxxxxxxxxxxx > >> >> [mailto:linux-bluetooth- owner@xxxxxxxxxxxxxxx] On Behalf Of > >> >> Szymon Janc > >> >> Sent: Friday, December 05, 2014 4:33 PM > >> >> To: Gowtham Anandha Babu > >> >> Cc: 'Szymon Janc'; linux-bluetooth@xxxxxxxxxxxxxxx; > >> >> d.kasatkin@xxxxxxxxxxx; bharat.panda@xxxxxxxxxxx; > >> cpgs@xxxxxxxxxxx > >> >> Subject: Re: [PATCH v1 2/5] monitor/rfcomm: Add support for RPN > >> >> frame decoding > >> >> > >> >> Hi Gowtham, > >> >> > >> >> On Friday 05 of December 2014 16:14:20 Gowtham Anandha Babu > wrote: > >> >> > Hi Szymon, > >> >> > > >> >> > > -----Original Message----- > >> >> > > From: linux-bluetooth-owner@xxxxxxxxxxxxxxx > >> >> > > [mailto:linux-bluetooth- owner@xxxxxxxxxxxxxxx] On Behalf Of > >> >> > > Szymon Janc > >> >> > > Sent: Thursday, December 04, 2014 8:48 PM > >> >> > > To: Gowtham Anandha Babu > >> >> > > Cc: linux-bluetooth@xxxxxxxxxxxxxxx; d.kasatkin@xxxxxxxxxxx; > >> >> > > bharat.panda@xxxxxxxxxxx; cpgs@xxxxxxxxxxx > >> >> > > Subject: Re: [PATCH v1 2/5] monitor/rfcomm: Add support for > >> >> > > RPN frame decoding > >> >> > > > >> >> > > Hi Gowtham, > >> >> > > > >> >> > > On Wed, Dec 3, 2014 at 1:01 PM, Gowtham Anandha Babu > >> >> > > <gowtham.ab@xxxxxxxxxxx> wrote: > >> >> > > > Changes made to decode RPN frame in RFCOMM for btmon. > >> >> > > > > >> >> > > > RFCOMM: Unnumbered Info with Header Check (UIH)(0xef) > >> >> > > > Address: 0x03 cr 1 dlci 0x00 > >> >> > > > Control: 0xef poll/final 0 > >> >> > > > Length: 10 > >> >> > > > FCS: 0x70 > >> >> > > > MCC Message type: Remote Port Negotiation Command > >> >> CMD(0x24) > >> >> > > > Length: 8 > >> >> > > > dlci 32 > >> >> > > > br 3 db 2 sb 0 p 0 pt 0 xi 0 xo 0 > >> >> > > > rtri 0 rtro 0 rtci 0 rtco 0 xon 17 xoff 19 > >> >> > > > pm 0x3f7f > >> >> > > > --- > >> >> > > > monitor/rfcomm.c | 73 > >> >> > > > > >> >> > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > >> >> > > > 1 file changed, 73 insertions(+) > >> >> > > > > >> >> > > > diff --git a/monitor/rfcomm.c b/monitor/rfcomm.c index > >> >> > > > cd50c8c..62b52cc 100644 > >> >> > > > --- a/monitor/rfcomm.c > >> >> > > > +++ b/monitor/rfcomm.c > >> >> > > > @@ -63,6 +63,18 @@ static char *cr_str[] = { > >> >> > > > #define GET_V24_IC(sigs) ((sigs & 0x40) >> 6) > >> >> > > > #define GET_V24_DV(sigs) ((sigs & 0x80) >> 7) > >> >> > > > > >> >> > > > +/* RPN macros */ > >> >> > > > +#define GET_RPN_DB(parity) (parity & 0x03) > >> >> > > > +#define GET_RPN_SB(parity) ((parity & 0x04) >> 2) > >> >> > > > +#define GET_RPN_PARITY(parity) ((parity & 0x08) >> 3) > >> >> > > > +#define > >> >> > > > +GET_RPN_PTYPE(parity) ((parity & 0x03) >> 3) > >> >> > > > +#define GET_RPN_XIN(io) (io & 0x01) > >> >> > > > +#define GET_RPN_XOUT(io) ((io & 0x02) >> 1) > >> >> > > > +#define GET_RPN_RTRI(io) ((io & 0x04) >> 2) > >> >> > > > +#define GET_RPN_RTRO(io) ((io & 0x08) >> 3) > >> >> > > > +#define GET_RPN_RTCI(io) ((io & 0x10) >> 4) > >> >> > > > +#define GET_RPN_RTCO(io) ((io & 0x20) >> 5) > >> >> > > > + > >> >> > > > struct rfcomm_lhdr { > >> >> > > > uint8_t address; > >> >> > > > uint8_t control; > >> >> > > > @@ -77,6 +89,16 @@ struct rfcomm_lmsc { > >> >> > > > uint8_t break_sig; > >> >> > > > } __attribute__((packed)); > >> >> > > > > >> >> > > > +struct rfcomm_rpn { > >> >> > > > + uint8_t dlci; > >> >> > > > + uint8_t bit_rate; > >> >> > > > + uint8_t parity; > >> >> > > > + uint8_t io; > >> >> > > > + uint8_t xon; > >> >> > > > + uint8_t xoff; > >> >> > > > + uint16_t pm; > >> >> > > > +} __attribute__ ((packed)); > >> >> > > > + > >> >> > > > struct rfcomm_lmcc { > >> >> > > > uint8_t type; > >> >> > > > uint16_t length; > >> >> > > > @@ -138,6 +160,55 @@ done: > >> >> > > > return true; > >> >> > > > } > >> >> > > > > >> >> > > > +static inline bool mcc_rpn(struct rfcomm_frame > >> >> > > > +*rfcomm_frame, uint8_t > >> >> > > > +indent) { > >> >> > > > + struct l2cap_frame *frame = &rfcomm_frame- > >l2cap_frame; > >> >> > > > + struct rfcomm_rpn rpn; > >> >> > > > + > >> >> > > > + if (!l2cap_frame_get_u8(frame, &rpn.dlci)) > >> >> > > > + return false; > >> >> > > > + > >> >> > > > + print_field("%*cdlci %d", indent, ' ', > >> >> > > > + RFCOMM_GET_DLCI(rpn.dlci)); > >> >> > > > + > >> >> > > > + if (frame->size < 7) > >> >> > > > + goto done; > >> >> > > > + > >> >> > > > + /* port value octets (optional) */ > >> >> > > > + > >> >> > > > + if (!l2cap_frame_get_u8(frame, &rpn.bit_rate)) > >> >> > > > + return false; > >> >> > > > + > >> >> > > > + if (!l2cap_frame_get_u8(frame, &rpn.parity)) > >> >> > > > + return false; > >> >> > > > + > >> >> > > > + if (!l2cap_frame_get_u8(frame, &rpn.io)) > >> >> > > > + return false; > >> >> > > > + > >> >> > > > + print_field("%*cbr %d db %d sb %d p %d pt %d xi %d > >> >> > > > + xo %d", > >> >> > indent, ' > >> >> > > ', > >> >> > > > + rpn.bit_rate, GET_RPN_DB(rpn.parity), > >> >> > GET_RPN_SB(rpn.parity), > >> >> > > > + GET_RPN_PARITY(rpn.parity), > GET_RPN_PTYPE(rpn.parity), > >> >> > > > + GET_RPN_XIN(rpn.io), GET_RPN_XOUT(rpn.io)); > >> >> > > > + > >> >> > > > + if (!l2cap_frame_get_u8(frame, &rpn.xon)) > >> >> > > > + return false; > >> >> > > > + > >> >> > > > + if (!l2cap_frame_get_u8(frame, &rpn.xoff)) > >> >> > > > + return false; > >> >> > > > + > >> >> > > > + print_field("%*crtri %d rtro %d rtci %d rtco %d xon %d xoff > %d", > >> >> > > > + indent, ' ', GET_RPN_RTRI(rpn.io), > GET_RPN_RTRO(rpn.io), > >> >> > > > + GET_RPN_RTCI(rpn.io), GET_RPN_RTCO(rpn.io), > rpn.xon, > >> >> > > > + rpn.xoff); > >> >> > > > + > >> >> > > > + if (!l2cap_frame_get_be16(frame, &rpn.pm)) > >> >> > > > + return false; > >> >> > > > + > >> >> > > > + print_field("%*cpm 0x%04x", indent, ' ', > >> >> > > > + __bswap_16(rpn.pm)); > >> >> > > > >> >> > > This __bswap_16 is invalid since rpn.pm was already converted > >> >> > > to host > >> >> > order > >> >> > > by l2cap_frame_get_be16(). (It wouldn't work correctly on BE > >> >> > > arch > >> >> anyway). > >> >> > > > >> >> > > Also this was causing build problems under Android. If you are > >> >> > > able to > >> >> > build- > >> >> > > test under Android please do so. If not then at least point > >> >> > > this in cover > >> >> > letter > >> >> > > or patch comment that code was tested only under Linux). > >> >> > > > >> >> > > I've fixed this myself but please pay attention to this with > >> >> > > any future submission. > >> >> > > > >> >> > > >> >> > Sure I will mention the tested platform details for future submission. > >> >> > > >> >> > Btw without __bswap_16(), rpn.pm and pn.mtu will be different > >> >> > from the hcidump logs. > >> >> > > >> >> > This is captured by removing __bswap_16(). > >> >> > > >> >> > Btmon log: > >> >> > RFCOMM: Unnumbered Info with Header Check (UIH)(0xef) > >> >> > Address: 0x03 cr 1 dlci 0x00 > >> >> > Control: 0xef poll/final 0 > >> >> > Length: 10 > >> >> > FCS: 0x70 > >> >> > MCC Message type: DLC Parameter Negotiation CMD(0x20) > >> >> > Length: 8 > >> >> > dlci 6 frame_type 0 credit_flow 15 pri 3 > >> >> > ack_timer 0 frame_size 32256 max_retrans 0 credits 1 > >> >> > > >> >> > Hcidump log: > >> >> > RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8 > >> >> > dlci 6 frame_type 0 credit_flow 15 pri 3 ack_timer 0 > >> >> > frame_size 126 max_retrans 0 credits 1 > >> >> > > >> >> > The rpn.pm is fine. That may be printed without doing > >> >> > __bswap_16() > >> also. > >> >> > > >> >> > But in the above PN frame, frame_size is different from actual > >> >> > hcidump trace. > >> >> > I cross checked with PTS logs, it was same as the hcidump trace. > >> >> > So, if it is causing build problems under Android, use > >> >> > l2cap_frame_get_le16() > >> >> > Instead of l2cap_frame_get_be16() for pn.mtu. > >> >> > > >> >> > If we are consistent with hcidump, then replace the be16() by > >> >> > le16() for both pn.mtu and rpn.pm. > >> >> > > >> >> > After replacing the le16() function: > >> >> > Btmon logs looks like: > >> >> > > >> >> > RFCOMM: Unnumbered Info with Header Check (UIH)(0xef) > >> >> > Address: 0x03 cr 1 dlci 0x00 > >> >> > Control: 0xef poll/final 0 > >> >> > Length: 10 > >> >> > FCS: 0x70 > >> >> > MCC Message type: DLC Parameter Negotiation CMD(0x20) > >> >> > Length: 8 > >> >> > dlci 6 frame_type 0 credit_flow 15 pri 3 > >> >> > ack_timer 0 frame_size 126 max_retrans 0 credits 1 > >> >> > > >> >> > What do you think ? > >> >> > >> >> If value is LE then l2cap_frame_get_le16() should be used. > >> >> (Same issue affects rpn.pm mcc_rpn(), right?) > >> >> > >> > > >> > Yes you are right. We have to use l2cap_frame_get_le16() for > >> > fetching both > >> rpn.pm and pn.mtu. > >> > I hope it will not cause any Android build problem. > >> > >> Actually you need to check what endianess for the protocol, the > >> kernel seems to treat RFCOMM as little endian which I suppose is the > >> correct byte order otherwise we would not be able to qualify or even > >> interoperate with other devices. > >> > > > > I checked it, the correct byte ordering for RFCOMM protocol is LE only. > > Then we need to replace every l2cap_frame_get_be* with > l2cap_frame_get_le*. > Submitted the same as patch. Please have a look at it. > > > >> >> > > >> >> > > > + > >> >> > > > +done: > >> >> > > > + return true; > >> >> > > > +} > >> >> > > > + > >> >> > > > struct mcc_data { > >> >> > > > uint8_t type; > >> >> > > > const char *str; > >> >> > > > @@ -201,6 +272,8 @@ static inline bool mcc_frame(struct > >> >> > > > rfcomm_frame > >> >> > > *rfcomm_frame, uint8_t indent) > >> >> > > > switch (type) { > >> >> > > > case RFCOMM_MSC: > >> >> > > > return mcc_msc(rfcomm_frame, indent+2); > >> >> > > > + case RFCOMM_RPN: > >> >> > > > + return mcc_rpn(rfcomm_frame, indent+2); > >> >> > > > default: > >> >> > > > packet_hexdump(frame->data, frame->size); > >> >> > > > } > >> >> > > > -- > >> >> > > > 1.9.1 > >> >> > > > > >> >> > > > -- > >> >> > > > To unsubscribe from this list: send the line "unsubscribe > >> >> > > > linux-bluetooth" in the body of a message to > >> >> > > > majordomo@xxxxxxxxxxxxxxx More majordomo info at > >> >> > > > http://vger.kernel.org/majordomo-info.html > >> >> > > > >> >> > > > >> >> > > > >> >> > > -- > >> >> > > pozdrawiam > >> >> > > Szymon K. Janc > >> >> > > szymon.janc@xxxxxxxxx > >> >> > > -- > >> >> > > To unsubscribe from this list: send the line "unsubscribe > >> >> > > linux- > >> bluetooth" > >> >> > in > >> >> > > the body of a message to majordomo@xxxxxxxxxxxxxxx More > >> majordomo > >> >> > > info at http://vger.kernel.org/majordomo-info.html > >> >> > > >> >> > > >> >> > Regards, > >> >> > Gowtham Anandha Babu > >> >> > > >> >> > -- > >> >> > To unsubscribe from this list: send the line "unsubscribe > >> >> > linux-bluetooth" in the body of a message to > >> >> > majordomo@xxxxxxxxxxxxxxx More majordomo info at > >> >> > http://vger.kernel.org/majordomo-info.html > >> >> > >> >> -- > >> >> Best regards, > >> >> Szymon Janc > >> >> -- > >> >> To unsubscribe from this list: send the line "unsubscribe > >> >> linux-bluetooth" in the body of a message to > >> >> majordomo@xxxxxxxxxxxxxxx More majordomo info at > >> >> http://vger.kernel.org/majordomo-info.html > >> > > >> > Regards, > >> > Gowtham Anandha Babu > >> > > >> > -- > >> > To unsubscribe from this list: send the line "unsubscribe > >> > linux-bluetooth" in the body of a message to > >> > majordomo@xxxxxxxxxxxxxxx More majordomo info at > >> > http://vger.kernel.org/majordomo-info.html > >> > >> > >> > >> -- > >> Luiz Augusto von Dentz > >> -- > >> To unsubscribe from this list: send the line "unsubscribe > >> linux-bluetooth" in the body of a message to > >> majordomo@xxxxxxxxxxxxxxx More majordomo info at > >> http://vger.kernel.org/majordomo-info.html > > > > > > Regards, > > Gowtham Anandha Babu > > > > > > -- > Luiz Augusto von Dentz > -- > To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in > the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo > info at http://vger.kernel.org/majordomo-info.html Regards, Gowtham Anandha Babu -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
