Hi Wen-chien,
> The device require external patchram firmware to work and need to
> add corresponding id in the btusb.c.
>
> T: Bus=03 Lev=01 Prnt=01 Port=08 Cnt=03 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=413c ProdID=8143 Rev=01.12
> S: Manufacturer=Broadcom Corp
> S: Product=BCM20702A0
> S: SerialNumber=20689D1FAF94
> C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
>
> Signed-off-by: Gavin Guo <gavin.guo@xxxxxxxxxxxxx>
> Signed-off-by: Wen-chien Jesse Sung <jesse.sung@xxxxxxxxxxxxx>
> ---
> drivers/bluetooth/btusb.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index c92f59f..d2923a8 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -107,6 +107,8 @@ static const struct usb_device_id btusb_table[] = {
> { USB_DEVICE(0x0b05, 0x17cb) },
> { USB_DEVICE(0x413c, 0x8197),
> .driver_info = BTUSB_BCM_PATCHRAM },
> + { USB_DEVICE(0x413c, 0x8143),
> + .driver_info = BTUSB_BCM_PATCHRAM },
>
> /* Foxconn - Hon Hai */
> { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
same here as well, lets use USB_VENDOR_INTERFACE_INFO and explain where the firmware comes from.
Regards
Marcel
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
