Hi, I tried to understand why this "0x13d3, 0x3408" device support wouldn't go in btusb as it's really close to IMC BT chip found in Realtek Wifi devices which is on the path to go in btusb [1] then I guess there is a lot of code that could be shared to support all IMC usb devices in the btusb module. Regards. [1] https://github.com/lwfinger/rtl8723au_bt/tree/new <------------------------------------------------------------------------------------------------------------------> Michel Memeteau - Directeur. Notre Boutique Ordinateurs GNU/Linux : http://shop.ekimia.fr 49 chemin de l'union 13720 La Bouilladisse - France. Fixe : +33 (0) 972308334 Mobile : +33(0) 624808051 <------------------------------------------------------------------------------------------------------------------> 2014-11-19 7:46 GMT+01:00 Dmitry Tunin <hanipouspilot@xxxxxxxxx>: > > Hi Marcel, > > Here is information from /sys/kernel/debug/usb/devices > > T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=13d3 ProdID=3408 Rev= 0.02 > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA > A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > > > I hope this mail client is OK now. > > Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module. > It is AR3011 device according to iProduct == 0. > So btusb should be blacklisted > I submitted a wrong patch before asif it was an AR3012 device, > but it works both ways. This is the right one. > > Signed-off-by: Dmitry Tunin<hanipouspilot@xxxxxxxxx> > > --- > > diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c > index d85ced2..3b53116 100644 > --- a/drivers/bluetooth/ath3k.c > +++ b/drivers/bluetooth/ath3k.c > @@ -69,6 +69,7 @@ static const struct usb_device_id ath3k_table[] = { > { USB_DEVICE(0x0CF3, 0x3002) }, > { USB_DEVICE(0x0CF3, 0xE019) }, > { USB_DEVICE(0x13d3, 0x3304) }, > + { USB_DEVICE(0x13d3, 0x3408) }, > > /* Atheros AR9285 Malbec with sflash firmware */ > { USB_DEVICE(0x03F0, 0x311D) }, > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c > index edfc17b..bbf5c1c 100644 > --- a/drivers/bluetooth/btusb.c > +++ b/drivers/bluetooth/btusb.c > @@ -146,6 +146,7 @@ static const struct usb_device_id blacklist_table[] = { > { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE }, > { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE }, > { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE }, > + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_IGNORE }, > > /* Atheros AR9285 Malbec with sflash firmware */ > { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE }, > > > 19.11.2014 01:56, Marcel Holtmann wrote: >> >> Hi Dmitry, >> >>> Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module. >>> It is AR3011 device according to iProduct == 0. >>> So btusb should be blacklisted >>> I submitted a wrong patch before asif it was an AR3012 device, >>> but it works both ways. This is the right one. >> >> include the device details from /sys/kernel/debug/usb/devices. >> >>> Signed-off-by: Dmitry Tunin <hanipouspilot@xxxxxxxxx> >>> are */ >> >> No idea what this are */ is. >> >>> --- >>> >>> diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c >>> index d85ced2..3b53116 100644 >>> --- a/drivers/bluetooth/ath3k.c >>> +++ b/drivers/bluetooth/ath3k.c >>> @@ -69,6 +69,7 @@ static const struct usb_device_id ath3k_table[] = { >>> { USB_DEVICE(0x0CF3, 0x3002) }, >>> { USB_DEVICE(0x0CF3, 0xE019) }, >>> { USB_DEVICE(0x13d3, 0x3304) }, >>> + { USB_DEVICE(0x13d3, 0x3408) }, >>> >>> /* Atheros AR9285 Malbec with sflash firmware */ >>> { USB_DEVICE(0x03F0, 0x311D) }, >>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c >>> index edfc17b..bbf5c1c 100644 >>> --- a/drivers/bluetooth/btusb.c >>> +++ b/drivers/bluetooth/btusb.c >>> @@ -146,6 +146,7 @@ static const struct usb_device_id blacklist_table[] = { >> { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE }, >>> { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE }, >>> { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE }, >>> + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_IGNORE }, >> >> Fix whitespace here or use a proper mail client. >> >> Regards >> >> Marcel >> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
