Hi Fabio, > This variant requires the flag BTUSB_BCM_PATCHRAM to work. > > Relevant details from /sys/kernel/debug/usb/devices: > > T: Bus=01 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 > D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=13d3 ProdID=3404 Rev= 1.12 > S: Manufacturer=Broadcom Corp > S: Product=BCM20702A0 > S: SerialNumber=240A646F1XXX > C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA > I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms > E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms > I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) > > The firmware was extracted from a Windows 8.1 64-bit installation > and converted from 'hex' to 'hcd' for use in Linux. > > Under Windows it also identifies itself as BCM20702A0, > but the firmware is named "BCM20702A1_001.002.014.1315.1356.hex" > and is located in "%SYSTEMROOT%\system32\drivers\" > (md5 67cf6bfdae61c4bb819a66da984f7913) > (sha1 5f74cc6a9a3bf19ee0f8c3d01e4be34c609b188f) > > The same firmware file is also available as a download at > http://www.asrock.com/mb/Intel/Z87E-ITX/?cat=Download&os=All > marked as "Bluetooth driver ver:12.0.0.7820" > > 'hcd' file should be placed at "brcm/BCM20702A0-13d3-3404.hcd" > inside the firmware directory (e.g. "/lib/firmware") > > Signed-off-by: Fabio K <healthkit@xxxxxxxxx> > --- > drivers/bluetooth/btusb.c | 2 ++ > 1 file changed, 2 insertions(+) patch has been applied to bluetooth-next tree. Regards Marcel -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
