From: Andrei Emeltchenko <andrei.emeltchenko@xxxxxxxxx>
---
android/hardware/bt_gatt_client.h | 134 ++++++++++++++++++++++++++++++++++++--
1 file changed, 130 insertions(+), 4 deletions(-)
diff --git a/android/hardware/bt_gatt_client.h b/android/hardware/bt_gatt_client.h
index cf4fabe..8073dd1 100644
--- a/android/hardware/bt_gatt_client.h
+++ b/android/hardware/bt_gatt_client.h
@@ -152,10 +152,59 @@ typedef void (*read_remote_rssi_callback)(int client_if, bt_bdaddr_t* bda,
int rssi, int status);
/**
- * Callback indicationg the status of a listen() operation
+ * Callback indicating the status of a listen() operation
*/
typedef void (*listen_callback)(int status, int server_if);
+/** Callback invoked when the MTU for a given connection changes */
+typedef void (*configure_mtu_callback)(int conn_id, int status, int mtu);
+
+/** Callback invoked when a scan filter configuration command has completed */
+typedef void (*scan_filter_cfg_callback)(int action, int client_if, int status, int filt_type,
+ int avbl_space);
+
+/** Callback invoked when scan param has been added, cleared, or deleted */
+typedef void (*scan_filter_param_callback)(int action, int client_if, int status,
+ int avbl_space);
+
+/** Callback invoked when a scan filter configuration command has completed */
+typedef void (*scan_filter_status_callback)(int enable, int client_if, int status);
+
+/** Callback invoked when multi-adv enable operation has completed */
+typedef void (*multi_adv_enable_callback)(int client_if, int status);
+
+/** Callback invoked when multi-adv param update operation has completed */
+typedef void (*multi_adv_update_callback)(int client_if, int status);
+
+/** Callback invoked when multi-adv instance data set operation has completed */
+typedef void (*multi_adv_data_callback)(int client_if, int status);
+
+/** Callback invoked when multi-adv disable operation has completed */
+typedef void (*multi_adv_disable_callback)(int client_if, int status);
+
+/**
+ * Callback notifying an application that a remote device connection is currently congested
+ * and cannot receive any more data. An application should avoid sending more data until
+ * a further callback is received indicating the congestion status has been cleared.
+ */
+typedef void (*congestion_callback)(int conn_id, bool congested);
+/** Callback invoked when batchscan storage config operation has completed */
+typedef void (*batchscan_cfg_storage_callback)(int client_if, int status);
+
+/** Callback invoked when batchscan enable / disable operation has completed */
+typedef void (*batchscan_enable_disable_callback)(int action, int client_if, int status);
+
+/** Callback invoked when batchscan reports are obtained */
+typedef void (*batchscan_reports_callback)(int client_if, int status, int report_format,
+ int num_records, int data_len, uint8_t* rep_data);
+
+/** Callback invoked when batchscan storage threshold limit is crossed */
+typedef void (*batchscan_threshold_callback)(int client_if);
+
+/** Track ADV VSE callback invoked when tracked device is found or lost */
+typedef void (*track_adv_event_callback)(int client_if, int filt_index, int addr_type,
+ bt_bdaddr_t* bda, int adv_state);
+
typedef struct {
register_client_callback register_client_cb;
scan_result_callback scan_result_cb;
@@ -175,6 +224,20 @@ typedef struct {
execute_write_callback execute_write_cb;
read_remote_rssi_callback read_remote_rssi_cb;
listen_callback listen_cb;
+ configure_mtu_callback configure_mtu_cb;
+ scan_filter_cfg_callback scan_filter_cfg_cb;
+ scan_filter_param_callback scan_filter_param_cb;
+ scan_filter_status_callback scan_filter_status_cb;
+ multi_adv_enable_callback multi_adv_enable_cb;
+ multi_adv_update_callback multi_adv_update_cb;
+ multi_adv_data_callback multi_adv_data_cb;
+ multi_adv_disable_callback multi_adv_disable_cb;
+ congestion_callback congestion_cb;
+ batchscan_cfg_storage_callback batchscan_cfg_storage_cb;
+ batchscan_enable_disable_callback batchscan_enb_disable_cb;
+ batchscan_reports_callback batchscan_reports_cb;
+ batchscan_threshold_callback batchscan_threshold_cb;
+ track_adv_event_callback track_adv_event_cb;
} btgatt_client_callbacks_t;
/** Represents the standard BT-GATT client interface. */
@@ -187,11 +250,11 @@ typedef struct {
bt_status_t (*unregister_client)(int client_if );
/** Start or stop LE device scanning */
- bt_status_t (*scan)( int client_if, bool start );
+ bt_status_t (*scan)( bool start );
/** Create a connection to a remote LE or dual-mode device */
bt_status_t (*connect)( int client_if, const bt_bdaddr_t *bd_addr,
- bool is_direct );
+ bool is_direct, int transport );
/** Disconnect a remote device or cancel a pending connection */
bt_status_t (*disconnect)( int client_if, const bt_bdaddr_t *bd_addr,
@@ -272,18 +335,81 @@ typedef struct {
/** Request RSSI for a given remote device */
bt_status_t (*read_remote_rssi)( int client_if, const bt_bdaddr_t *bd_addr);
+ /** Setup scan filter params */
+ bt_status_t (*scan_filter_param_setup)(int client_if, int action, int filt_index, int feat_seln,
+ int list_logic_type, int filt_logic_type, int rssi_high_thres,
+ int rssi_low_thres, int dely_mode, int found_timeout,
+ int lost_timeout, int found_timeout_cnt);
+
+
+ /** Configure a scan filter condition */
+ bt_status_t (*scan_filter_add_remove)(int client_if, int action, int filt_type,
+ int filt_index, int company_id,
+ int company_id_mask, const bt_uuid_t *p_uuid,
+ const bt_uuid_t *p_uuid_mask, const bt_bdaddr_t *bd_addr,
+ char addr_type, int data_len, char* p_data, int mask_len,
+ char* p_mask);
+
+ /** Clear all scan filter conditions for specific filter index*/
+ bt_status_t (*scan_filter_clear)(int client_if, int filt_index);
+
+ /** Enable / disable scan filter feature*/
+ bt_status_t (*scan_filter_enable)(int client_if, bool enable);
+
/** Determine the type of the remote device (LE, BR/EDR, Dual-mode) */
int (*get_device_type)( const bt_bdaddr_t *bd_addr );
/** Set the advertising data or scan response data */
- bt_status_t (*set_adv_data)(int server_if, bool set_scan_rsp, bool include_name,
+ bt_status_t (*set_adv_data)(int client_if, bool set_scan_rsp, bool include_name,
bool include_txpower, int min_interval, int max_interval, int appearance,
uint16_t manufacturer_len, char* manufacturer_data,
uint16_t service_data_len, char* service_data,
uint16_t service_uuid_len, char* service_uuid);
+ /** Configure the MTU for a given connection */
+ bt_status_t (*configure_mtu)(int conn_id, int mtu);
+
+ /** Request a connection parameter update */
+ bt_status_t (*conn_parameter_update)(const bt_bdaddr_t *bd_addr, int min_interval,
+ int max_interval, int latency, int timeout);
+
+ /** Sets the LE scan interval and window in units of N*0.625 msec */
+ bt_status_t (*set_scan_parameters)(int scan_interval, int scan_window);
+
+ /* Setup the parameters as per spec, user manual specified values and enable multi ADV */
+ bt_status_t (*multi_adv_enable)(int client_if, int min_interval,int max_interval,int adv_type,
+ int chnl_map, int tx_power, int timeout_s);
+
+ /* Update the parameters as per spec, user manual specified values and restart multi ADV */
+ bt_status_t (*multi_adv_update)(int client_if, int min_interval,int max_interval,int adv_type,
+ int chnl_map, int tx_power, int timeout_s);
+
+ /* Setup the data for the specified instance */
+ bt_status_t (*multi_adv_set_inst_data)(int client_if, bool set_scan_rsp, bool include_name,
+ bool incl_txpower, int appearance, int manufacturer_len,
+ char* manufacturer_data, int service_data_len,
+ char* service_data, int service_uuid_len, char* service_uuid);
+
+ /* Disable the multi adv instance */
+ bt_status_t (*multi_adv_disable)(int client_if);
+
+ /* Configure the batchscan storage */
+ bt_status_t (*batchscan_cfg_storage)(int client_if, int batch_scan_full_max,
+ int batch_scan_trunc_max, int batch_scan_notify_threshold);
+
+ /* Enable batchscan */
+ bt_status_t (*batchscan_enb_batch_scan)(int client_if, int scan_mode,
+ int scan_interval, int scan_window, int addr_type, int discard_rule);
+
+ /* Disable batchscan */
+ bt_status_t (*batchscan_dis_batch_scan)(int client_if);
+
+ /* Read out batchscan reports */
+ bt_status_t (*batchscan_read_reports)(int client_if, int scan_mode);
+
/** Test mode interface */
bt_status_t (*test_command)( int command, btgatt_test_params_t* params);
+
} btgatt_client_interface_t;
__END_DECLS
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
