On Thu, Sep 11, 2014 at 10:30:46AM +0100, Martin Townsend wrote:
> Hi Alex,
>
> On 11/09/14 09:53, Alexander Aring wrote:
> > Hi Martin,
> >
> > On Wed, Sep 10, 2014 at 03:06:08PM +0100, Martin Townsend wrote:
> >> Currently we support uncompressed IPv6 headers after performing fragmentation.
> >>
> > This patch is for wpan-next.
> ok, but it depends on the previous patches so how should I handle this?
> >
> >> Signed-off-by: Martin Townsend <martin.townsend@xxxxxxxxxx>
> >> ---
> >> include/net/6lowpan.h | 17 ++++++++++++
> >> net/ieee802154/6lowpan_rtnl.c | 63 +++++++++++++++++++++++--------------------
> >> 2 files changed, 51 insertions(+), 29 deletions(-)
> >>
> >> diff --git a/include/net/6lowpan.h b/include/net/6lowpan.h
> >> index d71c062..71b1bf0 100644
> >> --- a/include/net/6lowpan.h
> >> +++ b/include/net/6lowpan.h
> >> @@ -126,11 +126,28 @@
> >> (((a)[6]) == 0xFF) && \
> >> (((a)[7]) == 0xFF))
> >>
> >> +#define lowpan_dispatch_is_nalp(a) \
> >> + (((a) & LOWPAN_DISPATCH_MAJOR) == 0x00)
> >> +
> >> +#define lowpan_dispatch_is_mesh(a) \
> >> + (((a) & LOWPAN_DISPATCH_MAJOR) == 0x80)
> >> +
> > don't use the MINOR MAJOR thing here, I can't see that this follow any
> > structure at RFC4944.
> ok, but the spec hints at it by separating out the first two bits in Figure 2. Also table 2.1 in "6LoWPAN: The wireless embedded internet" book explicitly states that this is what the coding of the dispatch byte is, which is where I took it from.
Okay, so MAJOR = '11' is only FRAG thing. Now I can see it and yes you
are right.
Maybe then we should something like that. For example fragmentation handling:
First evaluate the MAJOR -> goes in some function e.g. lowpan_frag_handling
or something like that and then evaluate MINOR here for FRAG1 or FRAGN.
But this is out of scope of this patch. I would accept this patch to
introduce the defines, later we can do it as cleanup.
> >
> > Simple add more mask and values like:
> >
> > #define lowpan_dispatch_is_mesh(a) \
> > (((a) & LOWPAN_DISPATCH_MESH_MASK) == LOWPAN_DISPATCH_MESH)
> >
> > Please see the note below that we don't put this stuff into genetic 6lowpan.
> >
> >> +#define lowpan_dispatch_is_broadcast(a) \
> >> + ((a) == LOWPAN_DISPATCH_BCAST)
> >> +
> >> +#define lowpan_dispatch_is_frag(a) \
> >> + (((a) & LOWPAN_DISPATCH_MASK) == LOWPAN_DISPATCH_FRAG1 || \
> >> + ((a) & LOWPAN_DISPATCH_MASK) == LOWPAN_DISPATCH_FRAGN)
> >> +
> >> +#define LOWPAN_DISPATCH_MAJOR 0xc0
> >> +#define LOWPAN_DISPATCH_MINOR 0x3f
> >> +
> >> #define LOWPAN_DISPATCH_IPV6 0x41 /* 01000001 = 65 */
> >> #define LOWPAN_DISPATCH_HC1 0x42 /* 01000010 = 66 */
> >> #define LOWPAN_DISPATCH_IPHC 0x60 /* 011xxxxx = ... */
> >> #define LOWPAN_DISPATCH_FRAG1 0xc0 /* 11000xxx */
> >> #define LOWPAN_DISPATCH_FRAGN 0xe0 /* 11100xxx */
> >> +#define LOWPAN_DISPATCH_BCAST 0x50 /* 01010000 */
> >>
> > hehe... yea another big issue is also that much stoff from ieee802154
> > foo is inside the include/net/6lowpan header. We should not make this
> > problem bigger. Only IPHC stuff there, which is used by bluetooth and
> > 802154.
> >
> > For ieee802154 6lowpan, we don't need a global header file.
> >
> > Simple create one "net/ieee802154/6lowpan_i.h" - underscore means that's
> > internal header. These defines are only related to 802.15.4, e.g.
> > fragmentation on bluetooth is done at some mac mechanism (L2CAP, or
> > something else, that's what 6lowpan bluetooth draft says). So 6lowpan
> > fragmentation have nothing to do with bluetooth 6lowpan.
> ok. isn't this a separate fix/patch though as the problem already exists?
yea, cleanup. If you like you can do it. Go into bluetooth-next. The
iphc header have also a include of the af_802154 header which is very
very bad. The thing is we need more generic EUI64 defines instead to use
the LONG_ADDRESS (correct word is EXTENDED, not LONG) defines.
EUI64 is more generic which is a synonym for an simple IEEE EUI64
address, used by 802.15.4 and bluetooth. bluetooth need to fill the
ff:fe bits to generate the EUI64 but both can also be named EUI64.
We need handling for the SHORT address, that's not EUI16 or something
else... need some special defines, it's only 802.15.4 relevant.
> >> #define LOWPAN_DISPATCH_MASK 0xf8 /* 11111000 */
> >>
> >> diff --git a/net/ieee802154/6lowpan_rtnl.c b/net/ieee802154/6lowpan_rtnl.c
> >> index 4f4b02d..1557ece 100644
> >> --- a/net/ieee802154/6lowpan_rtnl.c
> >> +++ b/net/ieee802154/6lowpan_rtnl.c
> >> @@ -477,41 +477,46 @@ static int lowpan_rcv(struct sk_buff *skb, struct net_device *dev,
> >> if (ieee802154_hdr_peek_addrs(skb, &hdr) < 0)
> >> goto drop_skb;
> >>
> >> - /* check that it's our buffer */
> >> + /* First off if frame is Not A LoWPAN Packet (NALP) then chuck away */
> >> + if (lowpan_dispatch_is_nalp(skb->data[0]))
> >> + goto drop_skb;
> >> +
> >> + /* The 6LoWPAN header stack comprimises of the following (in order)
> >> + * Mesh
> >> + * Broadcast
> >> + * Fragmentation
> >> + */
> >> + if (lowpan_dispatch_is_mesh(skb->data[0]))
> > better is:
> >
> > lowpan_dispatch_is_mesh(*skb_network_header(skb))
> >
> > the network_header should be pointed to the beginng of 6LoWPAN header.
> yep, looks a lot better.
> >> + /* Not supported */
> >> + goto drop_skb;
> >> +
> >> + if (lowpan_dispatch_is_broadcast(skb->data[0]))
> >> + /* Not supported */
> >> + goto drop_skb;
> >> +
> >> + if (lowpan_dispatch_is_frag(skb->data[0])) {
> >> + u8 frag_dispatch = skb->data[0] & 0xe0;
> >> +
> >> + ret = lowpan_frag_rcv(skb, frag_dispatch);
> >> + if (ret != 1) {
> >> + /* more frags to process */
> >> + return NET_RX_SUCCESS;
> >> + }
> >> + }
> > I know this issue and we should not do that in this way.
> >
> > Why?
> >
> > Because this works only for fragmentation with IPHC, for example if we
> > support mesh or Broadcast or HC1 compression. We should call after
> > successfully reassembled "means lowpan_frag_rcv returns 1" the lowpan_rcv again.
> > So this is a recursion and we don't should use recursion to much, but it
> > should only be one recursion, so I think that's okay. :-)
> The spec says that the headers of the 6LoWPAN frame must fit in the first fragment. You need to process these headers to get to the fragmentation header, this is why the code is this way.
yes this is for IPHC dispatch values your code works, I don't want to
say that it doesn't work. Because fragmentation is something to
reconstruct the full payload, we should first evaluate the fragmentation
dispatches and then all others. To be sure that we can use fragmentation
on any dispatch value which is not the fragmentation dispatch values.
:-)
Simple move it before nalp check. Maybe somebody fragment something and
the dispatch value after fragmentation is nalp. I know it should catch
the default branch above, but it's a little bit cleaner. I hope you are
in the same opinion.
> >
> > After successfully reassemble we simple evaluate the DISPATCH value
> > again, this is also more a bug (because we don't handle LOWPAN_DISPATCH_IPV6
> > with fragmentation, and this can happen... We already talk about the
> > issue "don't use IPHC if compressed header size don't fit in a single
> > frame" and this is handled if we simple calll lowpan_frag_rcv again
> > after successful reassembling. But I don't will take this as bugfix,
> > because new support of handling xy, so wpan-next should be okay.
> >
> > Please separate also this from the "introduce new handling of dispatch
> > values".
> >
> >> +
> >> + /* We should now have an IPv6 Header (Compressed or Uncompressed) */
> >> if (skb->data[0] == LOWPAN_DISPATCH_IPV6) {
> >> - /* Pull off the 1-byte of 6lowpan header. */
> >> + /* Uncompressed, Pull off the dispatch byte */
> >> skb_pull(skb, 1);
> >> -
> >> - ret = NET_RX_SUCCESS;
> >> } else {
> >> - switch (skb->data[0] & 0xe0) {
> >> - case LOWPAN_DISPATCH_IPHC: /* ipv6 datagram */
> >> + if ((skb->data[0] & 0xe0) == LOWPAN_DISPATCH_IPHC) {
> >> + /* Compressed with IPHC - RFC 6282 */
> >> ret = iphc_uncompress_hdr(&skb, &hdr);
> >> if (ret < 0)
> >> goto drop;
> >> - break;
> >> - case LOWPAN_DISPATCH_FRAG1: /* first fragment header */
> >> - ret = lowpan_frag_rcv(skb, LOWPAN_DISPATCH_FRAG1);
> >> - if (ret == 1) {
> >> - ret = iphc_uncompress_hdr(&skb, &hdr);
> >> - if (ret < 0)
> >> - goto drop;
> >> - } else {
> >> - return NET_RX_SUCCESS;
> >> - }
> >> - break;
> >> - case LOWPAN_DISPATCH_FRAGN: /* next fragments headers */
> >> - ret = lowpan_frag_rcv(skb, LOWPAN_DISPATCH_FRAGN);
> >> - if (ret == 1) {
> >> - ret = iphc_uncompress_hdr(&skb, &hdr);
> >> - if (ret < 0)
> >> - goto drop;
> >> - } else {
> >> - return NET_RX_SUCCESS;
> >> - }
> >> - break;
> >> - default:
> >> - break;
> >> + } else {
> >> + /* TODO: other compression formats to follow */
> > don't know why we check at first for some types which we don't support
> > and drop it and then we have this here and drop also unknown types.
> The first part deals with the 6LoWAN header stack. Once header stack is processed then we decompress the remaining IPv6 headers so here we also throw away frames that we don't support decompression for. Once your NHC compression change is in I imagine this will be handled :)
ok. :-)
- Alex
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
