Hi, On 29 August 2014 22:39, Lukasz Rymanowski <lukasz.rymanowski@xxxxxxxxx> wrote: > > This patch fix race on incoming connection which leads to situaction > when New Link Key Event is sent to user space before Device Connected > Event. > I had a discussion on IRC about that issue with Johan and he correctly point out that downside of this patch is that user space will not get remote device name. However same thing kernel does on l2cap_connect_req. What we could do here is some Device Name Update Event or similar, so eventually user space will get remote device name. We can also say that this kernel behavior is OK ( frankly speaking BlueZ is handling it correctly) , then I do suggest to update mgmt-api.txt file with some note saying that "other pairing related events might come before that Device Connected Event". Anyway, as mentioned above, this issue is not a problem for BlueZ but only BfA. It is because BlueZ is not that strict when it comes to event order. That is why I will do fix for BfA for now, so it can handle that case similar to BlueZ (Johan is OK with that), and then we think what to do with kernel (if anything) > Logs: > > HCI Event: Connect Request (0x04) plen 10 > Address: 00:AA:01:01:00:00 (OUI 00-AA-01) > Class: 0x000000 > Major class: Miscellaneous > Minor class: 0x00 > Link type: ACL (0x01) > < HCI Command: Accept Connection Request (0x01|0x0009) plen 7 > Address: 00:AA:01:01:00:00 (OUI 00-AA-01) > Role: Slave (0x01) > > HCI Event: Command Status (0x0f) plen 4 > Accept Connection Request (0x01|0x0009) ncmd 1 > Status: Success (0x00) > > HCI Event: Connect Complete (0x03) plen 11 > Status: Success (0x00) > Handle: 42 > Address: 00:AA:01:01:00:00 (OUI 00-AA-01) > Link type: ACL (0x01) > Encryption: Disabled (0x00) > > HCI Event: IO Capability Response (0x32) plen 9 > Address: 00:AA:01:01:00:00 (OUI 00-AA-01) > IO capability: NoInputNoOutput (0x03) > OOB data: Authentication data not present (0x00) > Authentication: No Bonding - MITM not required (0x00) > > HCI Event: IO Capability Request (0x31) plen 6 > Address: 00:AA:01:01:00:00 (OUI 00-AA-01) > < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 > Handle: 42 > > HCI Event: Command Status (0x0f) plen 4 > Read Remote Supported Features (0x01|0x001b) ncmd 1 > Status: Success (0x00) > > HCI Event: Read Remote Supported Features (0x0b) plen 11 > Handle: 42 > Features: 0xa4 0x08 0x00 0xc0 0x18 0x1e 0x79 0x83 > Encryption > Role switch > Sniff mode > SCO link > RSSI with inquiry results > Extended SCO link (EV3 packets) > AFH capable slave > AFH classification slave > Sniff subrating > Pause encryption > AFH capable master > AFH classification master > Extended Inquiry Response > Secure Simple Pairing > Encapsulated PDU > Erroneous Data Reporting > Non-flushable Packet Boundary Flag > Link Supervision Timeout Changed Event > Inquiry TX Power Level > Extended features > < HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9 > Address: 00:AA:01:01:00:00 (OUI 00-AA-01) > IO capability: DisplayYesNo (0x01) > OOB data: Authentication data not present (0x00) > Authentication: No Bonding - MITM not required (0x00) > > HCI Event: User Confirmation Request (0x33) plen 10 > Address: 00:AA:01:01:00:00 (OUI 00-AA-01) > Passkey: 000000 > > HCI Event: Command Complete (0x0e) plen 10 > IO Capability Request Reply (0x01|0x002b) ncmd 1 > Status: Success (0x00) > Address: 00:AA:01:01:00:00 (OUI 00-AA-01) > < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 > Handle: 42 > Page: 1 > > HCI Event: Command Status (0x0f) plen 4 > Read Remote Extended Features (0x01|0x001c) ncmd 1 > Status: Success (0x00) > > HCI Event: Read Remote Extended Features (0x23) plen 13 > Status: Success (0x00) > Handle: 42 > Page: 1/1 > Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > Secure Simple Pairing (Host Support) > < HCI Command: User Confirmation Request Reply (0x01|0x002c) plen 6 > Address: 00:AA:01:01:00:00 (OUI 00-AA-01) > > HCI Event: Command Complete (0x0e) plen 10 > Status: Success (0x00) > Address: 00:AA:01:01:00:00 (OUI 00-AA-01) > > HCI Event: Simple Pairing Complete (0x36) plen 7 > Status: Success (0x00) > Address: 00:AA:01:01:00:00 (OUI 00-AA-01) > > HCI Event: Link Key Notification (0x18) plen 23 > Address: 00:AA:01:01:00:00 (OUI 00-AA-01) > Link key: 00010203040506070809000102030405 > Key type: Unauthenticated Combination key from P-256 (0x07) > < HCI Command: Remote Name Request (0x01|0x0019) plen 10 > Address: 00:AA:01:01:00:00 (OUI 00-AA-01) > Page scan repetition mode: R2 (0x02) > Page scan mode: Mandatory (0x00) > Clock offset: 0x0000 > > HCI Event: Command Status (0x0f) plen 4 > Remote Name Request (0x01|0x0019) ncmd 1 > Status: Success (0x00) > > HCI Event: Remote Name Req Complete (0x07) plen 255 > Status: Success (0x00) > Address: 00:AA:01:01:00:00 (OUI 00-AA-01) > Name: > > HCI Event: Encryption Change (0x08) plen 4 > Status: Success (0x00) > Handle: 42 > Encryption: Enabled with E0 (0x01) > @ New Link Key: 00:AA:01:01:00:00 (0) > @ Device Connected: 00:AA:01:01:00:00 (0) flags 0x0000 > > Signed-off-by: Lukasz Rymanowski <lukasz.rymanowski@xxxxxxxxx> > --- > net/bluetooth/hci_event.c | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c > index e6a496a..55c9d12 100644 > --- a/net/bluetooth/hci_event.c > +++ b/net/bluetooth/hci_event.c > @@ -3649,6 +3649,18 @@ static void hci_io_capa_request_evt(struct hci_dev *hdev, struct sk_buff *skb) > if (!conn) > goto unlock; > > + /* If flag HCI_CONN_MGMT_CONNECTED is not set in this point of time > + * that means remote is very quick with authenthication request and > + * kernel did make to ask for features and remote name. > + * To make sure that userspace will get device connected event before > + * any pairing related events, lets set HCI_CONN_MGMT_CONNECTED flag > + * here and send device connected event. > + */ > + if (!test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags)) > + mgmt_device_connected(hdev, &conn->dst, conn->type, > + conn->dst_type, 0, NULL, 0, > + conn->dev_class); > + > hci_conn_hold(conn); > > if (!test_bit(HCI_MGMT, &hdev->dev_flags)) > -- > 1.8.4 > \Łukasz -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
