Hi Jiada,
>>> Send an ACK frame with the current txack value in response to
>>> every received reliable frame unless a TX reliable frame is being
>>> sent. This modification allows re-transmitted frames from the remote
>>> peer to be acknowledged rather than ignored. It means that the remote
>>> peer knows which frame number to start re-transmitting from.
>>>
>>> Without this modification, the recovery time to a missing frame
>>> from the remote peer was unnecessarily being extended because the
>>> headers of the out of order reliable frames were being discarded rather
>>> than being processed. The frame headers of received frames will
>>> indicate whether the local peer's transmissions have been
>>> acknowledged by the remote peer. Therefore, the local peer may
>>> unnecessarily re-transmit despite the remote peer already indicating
>>> that the frame had been acknowledged in out of order reliable frame.
>>>
>>> Signed-off-by: Dean Jenkins <djenkins@xxxxxxxxxx>
>>> Signed-off-by: Jiada Wang <jiada_wang@xxxxxxxxxx>
>>> ---
>>> drivers/bluetooth/hci_bcsp.c | 94 ++++++++++++++++++++++++++++----------------
>>> 1 file changed, 60 insertions(+), 34 deletions(-)
>>>
>>> diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
>>> index 21cc45b..0f4664d 100644
>>> --- a/drivers/bluetooth/hci_bcsp.c
>>> +++ b/drivers/bluetooth/hci_bcsp.c
>>> @@ -478,13 +478,29 @@ static inline void bcsp_unslip_one_byte(struct bcsp_struct *bcsp, unsigned char
>>> static void bcsp_complete_rx_pkt(struct hci_uart *hu)
>>> {
>>> struct bcsp_struct *bcsp = hu->priv;
>>> - int pass_up;
>>> + int pass_up = 0;
>>>
>>> if (bcsp->rx_skb->data[0] & 0x80) { /* reliable pkt */
>>> BT_DBG("Received seqno %u from card", bcsp->rxseq_txack);
>>> - bcsp->rxseq_txack++;
>>> - bcsp->rxseq_txack %= 0x8;
>>> - bcsp->txack_req = 1;
>>> +
>>> + /* check the rx sequence number is as expected */
>>> + if ((bcsp->rx_skb->data[0] & 0x07) == bcsp->rxseq_txack) {
>>> + bcsp->rxseq_txack++;
>>> + bcsp->rxseq_txack %= 0x8;
>>> + } else {
>>> + /*
>>> + * handle re-transmitted packet or
>>> + * when packet was missed
>>> + */
>>
>> Comment style is wrong.
>>
>> /* aaa
>> * bbb
>> */
>>
>>> + BT_ERR ("Out-of-order packet arrived, got %u expected %u",
>>> + bcsp->rx_skb->data[0] & 0x07, bcsp->rxseq_txack);
>>
>> It is BT_ERR(" and not BT_ERR (".
>>
>>> +
>>> + /* do not process out-of-order packet payload */
>>> + pass_up = 2;
>>> + }
>>> +
>>> + /* send current txack value to all recieved reliable packets */
>>> + bcsp->txack_req = 1;
>>>
>>> /* If needed, transmit an ack pkt */
>>> hci_uart_tx_wakeup(hu);
>>> @@ -493,26 +509,36 @@ static void bcsp_complete_rx_pkt(struct hci_uart *hu)
>>> bcsp->rxack = (bcsp->rx_skb->data[0] >> 3) & 0x07;
>>> BT_DBG("Request for pkt %u from card", bcsp->rxack);
>>>
>>> + /*
>>> + * handle recieved ACK indications,
>>> + * including those from out-of-order packets
>>> + */
>>
>> Same here. Please fix comment style.
>>
>>> bcsp_pkt_cull(bcsp);
>>> - if ((bcsp->rx_skb->data[1] & 0x0f) == 6 &&
>>> - bcsp->rx_skb->data[0] & 0x80) {
>>> - bt_cb(bcsp->rx_skb)->pkt_type = HCI_ACLDATA_PKT;
>>> - pass_up = 1;
>>> - } else if ((bcsp->rx_skb->data[1] & 0x0f) == 5 &&
>>> - bcsp->rx_skb->data[0] & 0x80) {
>>> - bt_cb(bcsp->rx_skb)->pkt_type = HCI_EVENT_PKT;
>>> - pass_up = 1;
>>> - } else if ((bcsp->rx_skb->data[1] & 0x0f) == 7) {
>>> - bt_cb(bcsp->rx_skb)->pkt_type = HCI_SCODATA_PKT;
>>> - pass_up = 1;
>>> - } else if ((bcsp->rx_skb->data[1] & 0x0f) == 1 &&
>>> - !(bcsp->rx_skb->data[0] & 0x80)) {
>>> - bcsp_handle_le_pkt(hu);
>>> - pass_up = 0;
>>> - } else
>>> - pass_up = 0;
>>> -
>>> - if (!pass_up) {
>>> +
>>> + if (pass_up != 2) {
>>> + if ((bcsp->rx_skb->data[1] & 0x0f) == 6 &&
>>> + bcsp->rx_skb->data[0] & 0x80) {
>>
>> Fix indentation here.
>
> Can you tell me what should be the correct indentation.
if ((bcsp->... &&
(bcsp->... )) {
Regards
Marcel
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
